Front electric (3 memory positions on the drivers seat) and rear half leather / alcantara from a 2001 Seat Toledo in good condition but needing a light clean / valet.

Will need a little head scratching to wire them up especially the memory function on the drivers seat

£120 collected from near Crewe.

Pics uploaded to photobucket but the forum won't allow me to paste them here.......................

Works on google chrome...............

Will they fit a Fabia Vrs mk1?

Will they fit a Fabia Vrs mk1?

Anything can be made to fit, is it a straight fit - I wouldn't know.

I have a courier friend that lives near you if that helps

I'm almost certain all seats between toledo/leon/ibiza/fabia/polo are interchangeable but don't hold me to that.

I'm guessing this would require either a change of CCM or an aditional controller (memory controller).

Phil

I'm almost certain all seats between toledo/leon/ibiza/fabia/polo are interchangeable but don't hold me to that.

I'm guessing this would require either a change of CCM or an aditional controller (memory controller).

Phil

Not quite.

Golf 4, mk1 Leon/Toledo, and mk1 Octy are interchangeable

Polo, Ibiza/Cordoba and Fabia are interchangeable.

Not between the two.

Ah. My bad!

Thought they were the same but obviously not.

In that case it might take a bit of fettling to get them in!

Still have these? 2 years later haha

Still have these? 2 years later haha

Nope