Skip to content

Dip it, dip it real good!..................(a DIY wheel refurb thread)

Featured Replies

Just fitted those tonight as it happens.

Wife rang me this morning at work to say more bulbs have arrived for you, she also said, you've must've been talking on your Skoda Facebook again I suppose!!

  • Replies 149
  • Views 14.5k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Beats me, I have tried on many occasions to enlighten her as to the difficulties in finding the correct canbus error free LED 42mm festoon in order to have a better lit rear number plate but she fails

  • Aaaaaaand we're done Pretty happy I replicated the original wheel, which still requires more peeling, sigh. The wheels looked really distinct until the pearl coat, it is insane the change one coat

  • I think this is finally the thread that will convert my wife to accepting that Briskoda is not in fact the nickname of my mistress - especially as my default Christmas present to "her" is a new set of

  • Author

Just fitted those tonight as it happens.

Wife rang me this morning at work to say more bulbs have arrived for you, she also said, you've must've been talking on your Skoda Facebook again I suppose!!

I had to resort to getting all car based deliveries sent to work.

Now my PA raises her eyebrows at me rather than the missus

  • Author

Coat six and ready to move to metals and pearls

310efe66c54a3600716851cf63e69848_zps16e6

Hello Sparkly, I'm Back.

Sparkly do you have a new filter for the extractor fan?

 

Run your fingers along the top of your high units.

The last thing i sprayed in my kitchen was a Mountain bike in Hammerite Satin Black.

That really was an error, not the fastest for curing, and removal was not so easy.

 

The first thing i ever did in a house was an open face crash helmet in some ones kitchen while i was baby sitting.

My parents had to replace their vinyl flooring,  

they walked in expecting to find i had been at the drink cupboard and their feet were sticking to the floor.

 

george

  • Author

Hi George,

I checked all over after last night and not a trace, can't explain it if you have had problems I would expect to be in the **** right now, it certainly isn't down to any good management on my part.

Auric, that post made my night x

...just hit can two so £20.00 spray job v doable.

Good to know :thumbup:

  • Author

Aaaaaaand we're done

261d663c9381bab9c6219a5100a1b655_zpsa909

Pretty happy I replicated the original wheel, which still requires more peeling, sigh.

The wheels looked really distinct until the pearl coat, it is insane the change one coat makes, much more light reactive and multitonal. I think this would be a must have finish on lighter wheels, it really switches the look from flat rubber dip to something a bit more special, really glad I ordered this.

All in I have used two colour cans and around a quarter or third each of metallic silver clear coat and pearlescent.

  • Author

They look much much lighter than they are in these photography conditions

  • Author

Righty, got them on the car today, was losing light by the time I finished up so again with everything excuse the photography, it was rushed.

I need to do something about centre caps, the ones from the Gigaro's sit a bit proud as there is no recess, either need to dip those or the seat big centres.

Anyway, here you are

12DB2FD4-DF88-4F81-A4FC-05EDDA117356-205

61B13014-BF28-44C6-BCFD-758B22900A9F-205

Got annoyed car was so dirty so gave it a wash, snow foam, AG bodywork conditioner and Sonax Brilliant Shine Detailer for speed.

5CF65F5E-1E4B-48EA-910F-5BB086A0C24D-205

I was having to increase the exposure to get the shots and the result is they appear to have a touch of the Meteor Grey about them, this is far less in the flesh.

Got the wheels on with no nicks or damage which was nice.

8372FAF3-1BA4-490C-A23F-0B92CC31CF96-205

You can tell the ET is not too different to the Gigaro's they don't look overly tucked away under the arches.

390B9048-6BA8-4933-A331-15D8A9D69A79-205

Of all of the above shots, the second one showcases the colour the best.

I do wonder the durability of the plastidip...??

It does look awesome btw...:))

ServicePASAOGLU

  • Author

I do wonder the durability of the plastidip...??

It does look awesome btw...:))

ServicePASAOGLU

Thanks buddy, we will see on the durability, winter should be a tough test, might be better as a summer look treatment, we will see.

It was fun to do and I'm more than happy in this instance to be the Guinea Pig.

Really tempted to do my Gigaro's now :)

Thanks buddy, we will see on the durability, winter should be a tough test, might be better as a summer look treatment, we will see.

It was fun to do and I'm more than happy in this instance to be the Guinea Pig.

Really tempted to do my Gigaro's now :)

Yes you are right.. winter will be the greatest test for the dip...:)

I want to change thw color of my Gigaro's, it is very hard to keep it clean.. white does look awesome but.. my i can dip them or just put them aside and by another set of alloys...:) will decide in a couple of weeks...:)

ServicePASAOGLU

dont look overly tucked in the arches, you referencing my winter wheels buddy?! :punch:

 

mnf5.jpg
 

 

 

anyway they look good :) very good finish, just like me you have made some cheap wheels look brand new, for very little money and a bit of effort! its worth it that people know you can do this, and I have thoroughly enjoyed the thread ;)

 

just not sure about the colour combination with the rallye green!

 

go easy fpr the first few hundred miles to bed the tyres in, but below freezing they will work well :)

  • Author

Yes you are right.. winter will be the greatest test for the dip...:)

I want to change thw color of my Gigaro's, it is very hard to keep it clean.. white does look awesome but.. my i can dip them or just put them aside and by another set of alloys...:) will decide in a couple of weeks...:)

ServicePASAOGLU

I think you could get a great result with two cans of matt black and then pearl or gloss over the top. £30.00 colour change to trial the look. ;)

What size tyres did you go with on the 16" rims?.

How do the measure in Total Diameter beside the 205/40 R 17's that you had on the car.

 

george

  • Author

dont look overly tucked in the arches, you referencing my winter wheels buddy?! :punch:

 

anyway they look good :) very good finish, just like me you have made some cheap wheels look brand new, for very little money and a bit of effort! its worth it that people know you can do this, and I have thoroughly enjoyed the thread ;)

 

just not sure about the colour combination with the rallye green!

 

go easy fpr the first few hundred miles to bed the tyres in, but below freezing they will work well :)

Haha not at all mate, just putting voice to a concern I'd had about how they might look.

Going off the photo's that would be exactly my reaction on the colour but in the flesh it's better, or I think so. The Pearl coat has left them very tricky to photo, pretty much can disregard the really light shots too.

Will be going easy as suggested, thanks.

  • Author

What size tyres did you go with on the 16" rims?.

How do the measure in Total Diameter beside the 205/40 R 17's that you had on the car.

george

Sorry George, I've had a busy weekend, alongside posting on here I've been laying acoustic flooring in my sons bedroom.

I was a bit too knackered to get the measuring tape out :rofl: maybe another day so I can't say what real world diameter change there was. The tyres are 195/50/16 and came in under 2.5% change on willtheyfit.com, wheels are ET42 compared to Gigaro's 41. My arch gap looks more or less the same so I would say they are close to the Gigaro's and summer tyres.

Only been down the road to the shops but over a few bumps the ride appears no better, will report on this at a later date.

Tomorrow morning will do the calcs and set the maxidot for winters

I'm running 205/45/16's....... 195/50's will be ok with RR, I just wanted more width ....

  • Author

My idea was to trial more sidewall, part of me is wishing I had gone 205/45/16 for the width.

Also in my head I had thought it might be a slightly better profile if we get snow, who knows, you makes your choice :)

Would it be easy to put a rim of colour around the outside of the rim using this plastidip method?
 

 

Say I wanted, grey wheels with a green stripe?

  • Author

Would it be easy to put a rim of colour around the outside of the rim using this plastidip method?

Say I wanted, grey wheels with a green stripe?

My thoughts are that it would be tricky if you mean like on the Gigaro's. How thick a line.

You would need super accurate masking or maybe a stencil

But don't take my word for it I'm just the monkey test pilot.

As with most things in life I would say it's skill dependant :)

They do look pretty good. I think I might dip my winter's next summer.

just to check sparkly, can you simply peel this pain away if you fancy a change?

To mask the edge of the wheels such on Gigaros around the machined edge, you can use Coach lining/pin striping Tape to mask,

or just get the correct thin masking tape.

 

george

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.