Just picked up a Superb 2010 CR 140 Elegance Hatch today and I am very pleased with it but I am struggling with the phone / bluetooth. 

From what I have gleaned so far it has a columbus head unit with a bluetooth module by the drivers seat (part number 3C8 035 730 A) however I cannot find a way of connecting my phone. 

I scan for devices on my phone and nothing new comes up, and all I can get from the phone menu is either a factory reset or No user connected. 

Am I missing a trick?

 

Also it will read an SD card but freezes with an SDHC, am I right in thinking a firmware update with resolve this bit.

Could someone point me in the right direction?

 

Thanks in advance.

 

Roy

Take a look here. http://www.briskoda.net/forums/topic/377236-columbus-rns-510/

 

That might sort your Bluetooth issue.

As for the SD card, you must have an oldish Columbus with a 2Gb card capacity limit, and you will need a firmware update to get up to 32Gb capacity.

You have either to switch bluetooth on or make it visible, if switched on already.

MFD -> phone -> settings.

Thanks for your help, phone now connected, I was trying to do it from head unit and not the steering wheel controls. 

Is there an idiots guide to the firmware upgrade someone can point me towards?

 

Ta

 

Roy

Most questions will have been answered in here.

 

http://www.briskoda.net/forums/topic/298284-guide-upgrading-columbus-firmware-and-maps/