Superb MKIII VCDS Adaptations - tried and tested

Thanks to JR RS for the following

if anyone is interested in a "pulsating" Engine Start-Stop button, here is how:-

Ignition ON/OFF button (KESSY): activate heart-beat pulse

1. Go to the module 05-Acc/Start Auth 
2. Select Security Access, enter 20103
3. Select Adaptation
4. Change the channels below to activated
   - Search lights "ZAT_illumination_concept_mybeat_clamp58xt"
   
   
   
   - Search lights "ZAT_illumination_modus_mybeat_clamp58xt"
   
   
    
5. Select "Do It"
6. Exit VCDS - the button starts it's heat-beat pulse immediately after the changes are made

NOTE: the heart-beat effect only pulses when the door is unlocked and the engine is not turned-on, and after the engine is switched-off and the interior lights are still illuminated. Whilst the engine is running, the button illumination is a steady colour.

its subtle, but a nice touch.