Polybush Console bushes

[vrsRo55]

Anyone tried these.....Thought's

 

http://www.ebay.co.uk/itm/182089280640?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

 

[Muzza80]

Looks dead easy eh, does not show you the ballache removing the old bushes is lol

[vrsRo55]

Can't be that hard.

 

There is a tool online for £30.

 

Just can't see the bush in question being any good?

[roaddetective]

They are rather cheap. Quality usually comes at a price. Not long ago I had poly bushes fitted to my front wishbones, Powerpro poly bushes. They cost £118 a set. On a previous vehicle I bought a set of Powerflex bushes for the front wishbones. They were about the same price. The ones shown at £45.80, well it's either a real bargain, or poor quality. I know what my guess is!

[wiilydog]

I would go for super pro ones as they are 2 piece and rotate instead of twisting so superior in design. I think a paid around £112 for the front kit a few years ago and they are still fine after 50k

 

Edited 5 August, 2016 by wiilydog

[dozer123456]

Have had these fitted for the last 4 years and they are still nice and tight with no play

[vrsRo55]

I presume you mean Superpro?

[roaddetective]

I presume you mean Superpro?

Bloomin heck, I did mean Superpro. I put it down to my age!!!

[meaty101]

Looks dead easy eh, does not show you the ballache removing the old bushes is lol

Is it a mare removing the old oem bush? Did my own a few years back on my mk1 vrs and wasn't too bad. Hammer, chisel, drill and some brute force!!

[Tech1e]

Ibiza Cupra bushes fit and work just fine.

[willy0329]

Ibiza Cupra bushes fit and work just fine.

Are these the same as the non void/solid tt/s3 ones, i have got a set of bilstien/febi s3/tt solid ones waiting to go on £25 from ebay .

[AP Automotive]

Superpro are exeptional bushes.

 

We sell a lot of these http://ap-performance.co.uk/suspension-parts/control-arm-lower-rear-bracket-mount-octavia-mk2-2004.html

 

No creaking sqeeking etc which are sometimes complaints with other bushes. Easy to fit.

[vrsRo55]

Thank's everyone think i'm going with the TT one's with no voids.