Miss coded rear lights

[barnowl005095]

Hi, i recently coded my lights on when i unlock the car but it hasn't gone too well. For some reason i now have a rear o/s tail light stuck on. Its off on unlock but always on from turning the ignition. Does any one have any idea where ive gone wrong? I just want to put the rear lights back to standard config. 

Thanks

[Liger1956]

What software did you use to make the change and do you have a list of the module(s), bytes and bits that you changed? If you used VCDS then posting an auto scan here may give more knowledgeable people than me an idea of what has gone wrong.

[barnowl005095]

I used vcds vag com. Ive been back through all the things in the mod list and reset them back to original but i think ive accidentally changed another setting by accident. Does anyone know if ther's a log stored on the ecu of changes?

[Liger1956]

I understand that there is a log stored within the VCDS software. What version of VCDS did you use and what year is your car?

 

Again posting a full autoscan from VCDS and a detailed list of the values that you have changed would help.

[silver1011]

Have you been into the long coding in byte 18? Changing this code is a massive no-no.

 

You should always run and save an autoscan before making any changes, this makes it easier to revert back to the original settings.

 

However, even an autoscan won't help if you've changed byte 18.

[langers2k]

15 minutes ago, silver1011 said:

Have you been into the long coding in byte 18? Changing this code is a massive no-no.

 

Don't think that applies to a MK3 Octavia, it'll probably be some adaption channels that are messed up...

[SC03OTT]

Sounds like it’s coded to be a day time running light. But that’s a guess and not an actual diagnosis. 

[barnowl005095]

I didnt change any long coding. Only did the leuch options in the list.

Also i didnt know there was a way to save a config prior to coding. A way that might work, does anyone have the same model of car in this conv? If someone could export their list of leuch coding for rear lightd i might be able to sit and compare. 

[langers2k]

You should post a full autoscan and the adaption map for your BCM (address 09). You should also post your coding.log as that'll show exactly what changes you've made.

 

It's likley there are two similarly named channels and you changed the wrong one...

[PetrolDave]

6 hours ago, barnowl005095 said:

I didnt change any long coding. Only did the leuch options in the list.

 

2 hours ago, langers2k said:

You should post a full autoscan and the adaption map for your BCM (address 09). You should also post your coding.log as that'll show exactly what changes you've made.

Since barnowl005095 changed the leuchte options I think we'll need to see the AdpLog.csv file as well as the CodingLog.csv file.

[langers2k]

2 hours ago, PetrolDave said:

Since barnowl005095 changed the leuchte options I think we'll need to see the AdpLog.csv file as well as the CodingLog.csv file.

 

Yup, good shout, I'd forgotten it was in a separate file

[barnowl005095]

hi, sorry for the long time reply. i have had a look on my laptop and i reinstalled the software shortly after this mod so no luck for the log files. however i have just done an autoscan to see if this helps. Please see below

Address 09: Cent. Elect. (J519)       Labels: 5Q0-937-08X-MV1.clb
   Part No SW: 5Q0 937 084 S    HW: 5Q0 937 084 S
   Component: BCM MQBAB M   H14 0112  
   Serial number: 00011315800868
   Coding: 0F001842424700DB07A04082B10407280000000000000000000000000000
   Shop #: WSC 73430 790 00000
   ASAM Dataset: EV_BCCMONTI 011001
   ROD: N/A
   VCID: 48988362F328BB0161-801C

   Subsystem 1 - Part No SW: 5E2 955 119     HW: 5E2 955 119   Labels: 5QX-955-119-V1.CLB
   Component: WWS371 130514  041 0570 
   Serial number:         130523101555
   Coding: 065DDD

   Subsystem 2 - Part No SW: 5Q0 951 171     HW: 5Q0 951 171 
   Component: Sensor, DWA  005 0313 
   Serial number: 000000000ZY131002FH1

   Subsystem 3 - Part No SW: 5Q0 951 605     HW: 5Q0 951 605 
   Component: Sirene, DWA  004 0311 
   Serial number: 00000000000057028757

   Subsystem 4 - Part No SW: 8U0 955 559     HW: 8U0 955 559 
   Component: G355_FeuchteS  H07 0002 
   Serial number: 20387047            

No ASAM data for: "EV_BCCMONTI" (SK37) 
No fault code found.

-------------------------------------------------------------------------------
Address 10: Park/Steer Assist (J791)       Labels: 5Q0-919-283.clb
   Part No SW: 5Q0 919 283 B    HW: 5Q0 919 283 
   Component: PARKHILFE 4K  H09 0033  
   Revision: --------    Serial number: 60831314901970
   Coding: 0001050011
   Shop #: WSC 73430 031 00063
   ASAM Dataset: EV_EPHVA1A4U3700000 002018
   ROD: N/A
   VCID: 3878F3A283C8CB8111-806C

No ASAM data for: "EV_EPHVA1A4U3700000" (SK37) 
No fault code found.

[barnowl005095]

i have just found out how to map. please see if it helps.

Thanks

adpmap-09-5Q0-937-084-S.CSV