On 03/04/2024 at 09:27, Rainesh said:

Update to 088 and then 143

Hi Rainesh

I cannot sent you PM yet cause i'm a new user

I have a 5WA035284A with 0067 on it and looking to update it to 0075 or something newer if it's available

Waiting for your reply

thanks

1 minute ago, wellaflex said:

Hi Rainesh

I cannot sent you PM yet cause i'm a new user

I have a 5WA035284A with 0067 on it and looking to update it to 0075 or something newer if it's available

Waiting for your reply

thanks

Need to do in multistep svm code to 144F

2 minutes ago, Rainesh said:

Need to do in multistep svm code to 144F

Is hard to do that?or can be done remotely?

45 minutes ago, wellaflex said:

Is hard to do that?or can be done remotely?

need odis online for it and vas6154

5 minutes ago, Rainesh said:

need odis online for it and vas6154

Can you pm me please?

Hi Rainesh,

I need to update my OCU of my Skoda Karoq (5WA035284B, OCUGen3High, H20, SW 0035).

Is the OCU3_5WA035284B__SWUP_package_3G0919360RJ.7z or OCU3_5WA035284B__SWUP_package_3G0919360NS.7z the right Software update file ?

Thanks for your help.

Regards, Samoth

The MIB3 is already on SW 0330.

Edited 29 June, 202529 Jun by samoht

15 hours ago, samoht said:

Hi Rainesh,

I need to update my OCU of my Skoda Karoq (5WA035284B, OCUGen3High, H20, SW 0035).

Is the OCU3_5WA035284B__SWUP_package_3G0919360RJ.7z or OCU3_5WA035284B__SWUP_package_3G0919360NS.7z the right Software update file ?

Thanks for your help.

Regards, Samoth

The MIB3 is already on SW 0330.

3G0919360RJ

On 27/06/2025 at 18:59, Rainesh said:

Need to do in multistep svm code to 144F

Can you help me to do it?I have odis 23 and 6154a.no need to be for free

4 hours ago, Rainesh said:

3G0919360RJ

Worked. Everything went fine I am now on SW 0143.

Thank you very much :-)

On 27/06/2025 at 19:48, Rainesh said:

need odis online for it and vas6154

Can clone vas 6154a do online svm?

Flashing 144f always failed and have to flash back 067 to make the ocu working again

I need online svm before 144f flashing or after?and in quided functions what I need to select?thanks

11 hours ago, wellaflex said:

Can clone vas 6154a do online svm?

Flashing 144f always failed and have to flash back 067 to make the ocu working again

I need online svm before 144f flashing or after?and in quided functions what I need to select?thanks

HI Have you carscanner?? SVM is "Elementare WATSON"!!!

Hello,

I have a Scala Monte Carlo since february 2020.

Since MIB was updated by Skoda dealer, I have lost connectivity (infinite "Loading" message and Skoda shop apps have grey icons in menu). I tried a factory reset and then I managed to login with my Skoda Connect account but then unable to set account as main user because of infinite Loading message.

Skoda dealer has no solution to fix that except a full replacement of SOS system for a cost of about 1300€. So I would like to know if someone could have a way to fix software, connectivity worked fine until this update, including Skoda Connect app and traffic information in Skoda navigation map.

I have collected my actual configuration with OBD Eleven and attached captures to message.

Could someone please help to fix that ?

29 minutes ago, Cpl69 said:

Hello,

I have a Scala Monte Carlo since february 2020.

Since MIB was updated by Skoda dealer, I have lost connectivity (infinite "Loading" message and Skoda shop apps have grey icons in menu). I tried a factory reset and then I managed to login with my Skoda Connect account but then unable to set account as main user because of infinite Loading message.

Skoda dealer has no solution to fix that except a full replacement of SOS system for a cost of about 1300€. So I would like to know if someone could have a way to fix software, connectivity worked fine until this update, including Skoda Connect app and traffic information in Skoda navigation map.

I have collected my actual configuration with OBD Eleven and attached captures to message.

Could someone please help to fix that ?

Update Telematics to 143. Then run the OTA update and then it should be fixed

2 hours ago, Rainesh said:

Update Telematics to 143. Then run the OTA update and then it should be fixed

Thanks for your answer. Would you have a link to download update file ? And is it possible to run update from service menu with an USB key ?

I have found an update file in a Kamiq topic : https://www.briskoda.net/forums/topic/521024-kamiq-my20-mib3-update/page/5/#findComment-5933474

I have done update from Service menu with an USB key and it shows that update is OK. However I have checked with ODB Eleven and version is still 139 instead of 143 and I have a new 5F fault : Checking software version management

What could be the problem ? Did I take an incorrect update file ?

31 minutes ago, Cpl69 said:

I have found an update file in a Kamiq topic : https://www.briskoda.net/forums/topic/521024-kamiq-my20-mib3-update/page/5/#findComment-5933474

I have done update from Service menu with an USB key and it shows that update is OK. However I have checked with ODB Eleven and version is still 139 instead of 143 and I have a new 5F fault : Checking software version management

What could be the problem ? Did I take an incorrect update file ?

Yes you took the wrong file. You must take the file which matches with your hardware version number.

See https://mibsolution.one/index.php/f/181578

filename: OCU3_5WA035284B__SWUP_package_3G0919360RJ.7z

Best regards

Edited 30 July, 202530 Jul by samoht

2 minutes ago, samoht said:

Yes you took the wrong file. You must take the file which matches with your hardware version number.

See https://mibsolution.one/index.php/f/181578

Best regards

Hi, the link seems to be broken (displays "The file was not found!")

Does this link contain correct files : https://mibsolution.one/#/1/9/OCU

Edited 30 July, 202530 Jul by Cpl69

20 minutes ago, Cpl69 said:

Hi, the link seems to be broken (displays "The file was not found!")

Does this link contain correct files : https://mibsolution.one/#/1/9/OCU

Yes

In my case Hardware number is 5WA035284 and software number is 5WA035284E. In which one should I refer ?

3 minutes ago, Cpl69 said:

In my case Hardware number is 5WA035284 and software number is 5WA035284E. In which one should I refer ?

I used OCU3_5WA035284B__SWUP_package_3G0919360RJ.7z for Hardware number 5WA035284B.

Should be OCU3_5WA035284___SWUP_package_3G0919360RH.7z but perhaps it is better to check with Rainesh.

Edited 30 July, 202530 Jul by samoht

8 minutes ago, samoht said:

I used OCU3_5WA035284B__SWUP_package_3G0919360RJ.7z for Hardware number 5WA035284B.

Should be OCU3_5WA035284___SWUP_package_3G0919360RH.7z but perhaps it is better to check with Rainesh.

You need RH

@Rainesh OK for RH, it matches with update file I used. Is it normal that SOS light turns Off with SOS fault during update ? I don't manage to check if update has finished. From service menu update log it seems to be OK but with OBD version is still 139 and permanent fault "Checking Software version management"

32 minutes ago, Cpl69 said:

@Rainesh OK for RH, it matches with update file I used. Is it normal that SOS light turns Off with SOS fault during update ? I don't manage to check if update has finished. From service menu update log it seems to be OK but with OBD version is still 139 and permanent fault "Checking Software version management"

Did you not check if the update was successful installed? At the end you will see in the summary screen OK. It should then show in OBD 143.

And yes is normal

@Rainesh During update I had screen indicating line per line install progress, each line had a progress bar witch then switch to "OK". At the end I had at the bottom of screen: 13/13 - 1 OK, 12 N/A. After Telematics fault gone OFF and LED went back to green, system asked me to reboot.

After that I plugged OBD Eleven, I saw faults that came during update and version at still 139 and also no connectivity in MIB.

It is possible that Skoda dealer had same behavior. How could I troubleshoot this and check if my Telematics hardware could have a problem blocking update ?

Is fault "Checking Software version management" juste an information or it can block something ?

Hi,

I have a 2019 Skoda Scala Ambition, with the following telematics unit.
I had to change the battery and since then the MySkoda app can not connet to the car.

Tried to reset the setting in car, but since then it is not able to finish the connection.

I know there were a change from Skoda Connect to MySkoda app this year, and I think the issue is connected to that change.

So, all in all I want to update my Swing unit, I found the update files for it, but where can I find update files for OCU unit?

Checked this page, but there is no file for 5WA035282: https://mibsolution.one/#/1/9/OCU

Thanks!

Edited 1 August, 20251 Aug by banalac