Hi everyone,

I have a problem with the A5 module on my 2016 Skoda Superb 3 (engine DFCA 2.0 TDI, VIN: <Removed>).
A workshop tried to code TSR (Traffic Sign Recognition) using an Autel diagnostic tool, however my car does not have TSR or Lane Assist from the factory. After the coding, ACC (Adaptive Cruise Control) stopped working and I now have communication errors between modules.

A5 module details:

• Part number: 3Q0980654D

• Hardware version: H04

• Software version: 0024

Fault in A5: B201000 — Basic Settings missing, Camera status: System fault

Current A5 Long Coding:

02 04 08 02 00 00 04 00 00 02 03 44 80 40 A0 00 00 0E 10 00 20

The workshop did not make a backup before coding and cannot revert the changes.

Does anyone have the same configuration (Superb 3 B8 2016, no TSR, no Lane Assist, with ACC) and could share the factory Long Coding for the A5 module or is able to help me back this up any other way?

Thanks in advance!

Please use do not post your VIN or reg number on the public forums, as data scraping may use this information for vehicle cloning or other activities. Only send this information via the PM (Private Messaging) function to trusted members. If the PM function is not yet available to you, tagging the member and asking them to start a conversation will work.

Briskoda Admin.

Why not just return it to the said workshop and get them to revert the coding?
ATEOTD it's their error.

Surely they saved a backup copy before changing the coding?

Not sure if Autel saves a copy of any changes made?

Simply copying and pasting someone else's coding is nearly as daft as not saving a copy of the original coding on the car before changing it, no two cars are identical so you are opening up a can of worms.

BASIC Error you dont repair with Backup

Which Diagnose Tool you have? You have a VAS Dongle? Then i can to it remote

Write PM To me

Edited 11 April11 Apr by Cairus

I bought this car with this issue, and the previous owner (my mate) tried to take it back to the garage, but they’re saying they didn’t make a backup file before.

I’ve got an Autel MS906, OBDeleven and Thinkcar, and I was hoping I could get the original factory coding and upload it through OBDeleven. Unfortunately, no one close to me has ODIS to get it done.

@Cairus can’t send pm to you

Share Backup Full Backup obd11

I’ll do it shortly and share it. If you could, try to send me a PM so I can send it directly to you

I’ve attached full backup fileOBDeleven_Log full backup.txt

No warrenty

Backup_Superb.html

Unfortunately it doesn’t help but thank you anyway 😉

OBDeleven_Log scan.txt

🤦

Organize a VAS Dongle and i Help remote

What dongle exactly i need? I’ve got VCDS- HEX 2(clone) somewhere if that’s help

VAS6154a or vnci Red....

Edited 12 April12 Apr by Cairus