Hello

Today i did with my obd eleven transmission synchro points calibration.

Superb 2021 dq381 7 speed.

I did with one click app. Engine oil has 90c and i did this when i come home from 50km long trip.

There was some noise from transmission (normal) when procedure starts. The gearbox light error (or something) come to the dash. After obdeleven app shows procedure complete the error was gone. All normal. Car wont go in anny gear now. So i turn engine off and back on. The car now go in D and R. BUT there is now error.

ERROR/gearbox Driving in D is only available until the engine is switched off."

Pleas help.

That is the last scan when turn engine of and back on.

Edited 6 hours ago6 hr by Seba800

Problem sold! Just do manual synchro point calibration/not with one click app!

Thats it.

5 hours ago, Seba800 said:

Hello

Today i did with my obd eleven transmission synchro points calibration.

Superb 2021 dq381 7 speed.

I did with one click app. Engine oil has 90c and i did this when i come home from 50km long trip.

There was some noise from transmission (normal) when procedure starts. The gearbox light error (or something) come to the dash. After obdeleven app shows procedure complete the error was gone. All normal. Car wont go in anny gear now. So i turn engine off and back on. The car now go in D and R. BUT there is now error.

ERROR/gearbox Driving in D is only available until the engine is switched off."

Pleas help.

That is the last scan when turn engine of and back on.

Evidently you didn't follow instructions. Re-do and follow instructions.