Skip to content

Yeti 5L: byte 18 changed, need BCM light config (VCP) - halogen

Featured Replies

Hi all,

I have a Skoda Yeti 5L 1.2 TSI (2015 facelift) with halogen headlights, front fog lights and headlight washers. BCM is 1K0937087AN (BCM PQ35 M).

In March 2025 I changed byte 18 in module 09 with OBDeleven (wrote 01, then FF, then set it back to 00). Since then the original light config has been overwritten:

  • front parking lights don’t work (faults 02394 and 02395, bulbs are fine)

  • with the light switch at 0, the front left parking light stays on

  • rear fog light switch turns on the front right parking light instead of the rear fogs

  • left reverse light turns off when I switch on the parking lights

The Skoda dealer already wrote the factory coding online, with no result. I know byte 18 was 00 from factory, so there is no “correct” value to write.

I’m looking for someone who can read the BCM light configuration with VCP from a Yeti with the same equipment (halogen + fogs, ideally same BCM part number or at least BCM PQ35 M) and share it, so my coder can write it back. Only the light config is needed, not the full BCM dump. Reading it doesn’t change anything on your car.

PR code sticker attached. Any help or advice is much appreciated. Thanks!

Nicolò (Italy)

WhatsApp Image 2025-10-20 at 08.51.52.jpeg

  • Author

@langers2k @claudiu2s Hi both, I found your posts in “BCM module in YETI” (2021): https://www.briskoda.net/forums/topic/488992-bcm-module-in-yeti/
You mentioned having Yeti light configs and VCP. My Yeti 5L 2015 (halogen, front fogs, headlight washers, BCM 1K0937087AN PQ35 M) lost its original light config after I changed byte 18. Could you share a halogen Yeti light config (.bcm1), or prepare one I could have written with VCP here in Italy? Happy to pay for your time. Thanks a lot!

  • Author

@Wlad69 Hi, sorry to bring up an old thread. I have the same problem on my Yeti 5L 2015 (halogen, front fogs, BCM 1K0937087AN): I changed byte 18 and lost the original light config.
Could you tell me which byte 18 calculator you found, and which value worked on your Yeti? It would help me a lot. Thank you!

Take a look at VAGhelper: https://skodapilot.com/vaghelper/

Pretty sure that includes at least one Yeti config which might give you a good starting point.

Create an account or sign in to comment

Recently Browsing 2

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.