Skip to content

Yeti 5L: byte 18 changed, need BCM light config (VCP) - halogen

Featured Replies

Hi all,

I have a Skoda Yeti 5L 1.2 TSI (2015 facelift) with halogen headlights, front fog lights and headlight washers. BCM is 1K0937087AN (BCM PQ35 M).

In March 2025 I changed byte 18 in module 09 with OBDeleven (wrote 01, then FF, then set it back to 00). Since then the original light config has been overwritten:

  • front parking lights don’t work (faults 02394 and 02395, bulbs are fine)

  • with the light switch at 0, the front left parking light stays on

  • rear fog light switch turns on the front right parking light instead of the rear fogs

  • left reverse light turns off when I switch on the parking lights

The Skoda dealer already wrote the factory coding online, with no result. I know byte 18 was 00 from factory, so there is no “correct” value to write.

I’m looking for someone who can read the BCM light configuration with VCP from a Yeti with the same equipment (halogen + fogs, ideally same BCM part number or at least BCM PQ35 M) and share it, so my coder can write it back. Only the light config is needed, not the full BCM dump. Reading it doesn’t change anything on your car.

PR code sticker attached. Any help or advice is much appreciated. Thanks!

Nicolò (Italy)

WhatsAppImage2025-10-20at08_51_52.jpeg.92e5d9bdca6137eab739f439033499c4.png

Edited by Lee01
ID removed

  • Author

@langers2k @claudiu2s Hi both, I found your posts in “BCM module in YETI” (2021): https://www.briskoda.net/forums/topic/488992-bcm-module-in-yeti/
You mentioned having Yeti light configs and VCP. My Yeti 5L 2015 (halogen, front fogs, headlight washers, BCM 1K0937087AN PQ35 M) lost its original light config after I changed byte 18. Could you share a halogen Yeti light config (.bcm1), or prepare one I could have written with VCP here in Italy? Happy to pay for your time. Thanks a lot!

  • Author

@Wlad69 Hi, sorry to bring up an old thread. I have the same problem on my Yeti 5L 2015 (halogen, front fogs, BCM 1K0937087AN): I changed byte 18 and lost the original light config.
Could you tell me which byte 18 calculator you found, and which value worked on your Yeti? It would help me a lot. Thank you!

Take a look at VAGhelper: https://skodapilot.com/vaghelper/

Pretty sure that includes at least one Yeti config which might give you a good starting point.

  • Author

@langers2k Thanks a lot! I’ll have a VCP user write a config in January, starting from the Yeti config in VAGHelper and adapting it to halogen + front fogs + headlight washers (byte 18 stays at 00, current config saved first).

Two quick questions, if you don’t mind:

  1. On an Italian forum someone suggested writing 74 in byte 18 as “Yeti halogen facelift”, but in the tables I found 74 is “Superb (SK461) China, no DRL, LED SBBR”. Is there any byte 18 value that loads a halogen Yeti config on a 1K0937087AN, or is VCP the only proper way?

  2. In VAGHelper, is there anything specific to change from the default Yeti config for a halogen car?

I’ll post the result here. Thanks again!

As far as I know, if byte 18 was 00 then no byte 18 value is correct for that vehicle. Some might be close enough that everything seems to work but there will be a difference that an engineer in VAG thought was important.

Byte 18 mostly deals with lighting channels that aren't the headlights or front fog lights. As long as the example you find from VAGhelper has the same rear lights (halogen or LED) then I think you have a very good chance.

  • Author

Thank you, that’s very clear and reassuring! My rear lights are halogen (P21W bulbs).
Does anyone here have VAGHelper and could check the Skoda Yeti 2014 halogen scheme (halogen headlights, front fogs, halogen rear lights)? A screenshot of the outputs or the .bcm1 file would help me a lot. Thanks!

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.