D.FYLAKTOS

Tell me that this is cell phone’s camera blurriness and not the real effect of those bulbs (and what the other drivers see). 😵

Ι think their beam is too hi,no matter if it's in the 1st scale they blind a bit anyone who looks straight to the car.

These 5W5 leds have some sort of adjustment? The H4 have a left or right turn option to make the beam straight, those small bulbs have or they fit in one position and that's it?

Mine has a small part missing (cut) has not a crack,i will try to take a photo of it.

@TonyW1967 Click report,leave the first line as is and below (in the reason section) write that you want to edit the title and add the proper one or send a pm to a Moderator with the proper title and he will do the job.

it's a 2 nuts and bolts job or needs to go to a repair-shop?

Part number: 6U0199331 By quich search the most expensive here are MAPCO (they advertise it as original) and AKUSAN PS.

Click in your first post the 3 dots, then Edit and make the correction.

Yes but haw many times you will open this box? It's for cabin filter and since you have no a/c then leave it as is.

@TonyW1967 Don't forget the gasket if you replace the water pump,always go as a ''set''.

You mean the part of the trunk door aka 5th door? With wood inside,grey carpet outside and clips to keep it tight with the body of the door?

3M self-adhesive tape, other use windshield glue, i would use Logo Silic black. https://logo.gr/en/%CE%BA%CF%8C%CE%BB%CE%BB%CE%B5%CF%82/161-logo-silic-professional-5202456213507.html

From older topic (a no aircondition Felicia) i found this photo:

In hardware or Hobby stores may have, for another use but maybe they fit.

My Felicia had that console from the factory,the cupholders are ridiculous and not capable to hold a cup of coffee or a water bottle so i removed it. The alternate solution is this: If you want to add gauges etc.

The tyre-shop guy was the culprit, he did what you said or he put it in a rong spot and bent that part of the metal. Now needs some forging work plus painting.

In the area beneath the coil a degrease spray with long nose is a ''must''. https://a.allegroimg.com/SKODA-FELICIA-II-6U1-1-3-MPI-781-136M-68KM

I have a small issue in the same area (seam up or lip),a non-local mechanic lift it without paying attention where to put the jacking ''arms'' and cause me a small bend. Other mechanic point this to me,he took the car from him for other work (insulation) and spot it,too late to ask for explanations from the first idiot.

6U0 853 518 D (1 for passenger side) 6U0 853 753 D (2 for driver and passenger side) 6U0 853 754 D (left side and read)

Show me by the numbers of the below picture which stripe you want, i will search for the part code. Forget the ETKA (7zap) number, tell me from my picture only.

Like this one? https://www.batteryclub.gr/image/cache

No, the front door has 1 and the rear 1, the front fender has 1.

Online catalog with PART NUMBERS and ILLUSTRATIONS (thread) https://www.briskoda.net/forums/topic/358204-online-catalog-with-part-numbers-and-illustrations/page/2/

No steam, may damage some soft plastics and bring moisture in contacts-cable connections. Use a tough pair of gloves (not cheap one-use nitrile) and baby wipes, in difficult spots throw some alcohol lotion 93 'C and use a long paint brush, in hard areas a degrease spray with caution, then wipe the excess. When all are clean use a cloth and a plastic-care product and apply a light coat on them. NO water in pressure via garden hose inside the engine bay !

This i had i mind, to buy a drain plug and send it to a lathe machine, then fit a neodymium magnet (cylinder). I don't trust the cheap magnetic oil drain plugs in e-stores. Some use magnets in oils filters (external plate) for this reason. Your comes out clean after oil change?