pab567

Both of them will work, they are direct replacement to yours, you will need to mechanically rework the molding used for installation as the distance between screws is slightly different.

Unfortunately amplfier must be swapped as well to either 81A035223 or 3Q0035466A, After installation it must have Component Protection removed.

All check your PMs

@jonesi100 pls share VIN and put error details, e.g VCDS scan

You have Amundsen MIB2, with Bluetooth, with DAB, part number 5E0035874A, with USB 5Q0035726E (supports both Android Auto and CarPlay) and CANTON sound system. What are you missing in your system?

Pls share your VIN so I can check details and provide an answer.

You probably have the best firmware for you unit - to make sure pls remove it and send the picture of the label from upper case. If I remember correctly the most recent maps are alredy 7 years old and there will never be new release as this unit is not supported since several years.

Yes

I sent you firmware link on PM. Pls note it will re-partition your HDD so all music and maps will be lost and you will have to re-upload it again. If you woul dliek to have firmware that will not re-partition your HDD then let me know and I will send you the link earliest tomorrow evening when I am back home.

The question is what is your Telephone (Bluetooth) module part number...

Yes, when you remove the unit there will be a label on the upper case

@MisterSkoda it looks that your car was NOT equipped with Bluetooth module when manufactured so it must have been retrofitted and probably located in another place then factory designated. Try to get someone with any diagnostics tool (VCDS, VCP, OBD Eleven etc.) and run a scan to get Bluetooth module info.

@skodanewby315 I sent you link for the latest firmware for your unit. These units support Android Auto - see the screen when you select SmartLink from touch screen menu.

It's just electronics - sometimes hardware, sometimes software... if it display swl message then just load CD with the right firmware - send a picture of upper case label and I will share link with you

All check your PMs. @Ashot I really doubt it will help, if you don't manage to have it solved pls contact me on PM.

Pls share current SW version or picture of the label from upper cover of your unit first.

Pls share VIN so I can check BT module version you have.

Others pls check your PM

Pls post part number and current SW version

I don't... Unfortunately not, you need to replace infotainment reader, if you are interested pls contact me on PM.

I sent link to th elatest SW on PM however IMHO this is HW, not SW issue.

Share VIn so I can check in production database.

Sent in PM