wellaflex

you the man Thanks

Been tested this one and i will update the thread Thank you

By any change do you have any part numbers for the entire retrofit?thanks

You can look for 5Q1953507GF and remove the switches and keep only the clock squib

Update After regas everything come back to normal,even more effective 70g of gas remaining on my 2021 model

I have this issue too...all I could find till now is that it might be needed a regas in the system

Which one fuse

So you been able to get a better stock sound or still the same?

Hello guys Do anybody have any idea where the battery life on these batterys can be find? i can't find nothing in battery module or gateway

https://aiduauto.com/blog/a3-8y-camera-install-44

All the links are having problems downloading Anyone with different link please? Thanks Update Working after a while

On octavia 2021 with sfd1 is the same problem?or this retrofit can be done

If you want only heated steering wheel retrofit you still need to change everything like shown in the video or in the description You don't need to change the whole combination switch , only the round control module unit Example here but you still need the cable adapter for wiring plus and ground And coding only Gateway 19 and Air conditioning 08 And i never had the message "temporary unavailability" when driving,only happend sometimes when only ignition is on

you right bro

I couldn't find any editing available about data set.When you say module you mean the KLR module right? is optional ,they are some people who using it Actually i didn't know that control unit alone would be enough,i though they a single unit 🫠 I quess about the wiring is not to much to say cause the adapter is mostly plug and play and + and ground are addressed at the end of the video

With a lot of information already available on the forum about travel assist retrofit but nothing about heated steering wheel for our mk4 i decided to post my way of retrofiting both of them along with a video of showing how to do it along with the codings For this retrofit to be able to work on your car you need to have already ACC and Lane AssistFor some modules will need SFD unlocking to be able to do the codings Parts Requirement -5E3419093AT heated steering wheel with travel assist button -Heated Cable adapter for the combination switch https://www.aliexpress.com/item/1005003791804873.html -5Q1953507GF COMBINATION SWITCH For travel assist: 20103 security code Select Driver Assistance A5 - Select Long coding - Select KLR - Set to Coded - Select Point of intervention - Set to Early - Select HC Warn Intensity - Set to Setting_over_menu - Select HC variante - Set to Variante_2 Select Adaptive cruise control 13 - Select Long coding - Select Capacitive_steering_wheel - Set to Installed - Select Travel Assist - Set to Activated Select Gateway 19 - Select Adaptation - Select Specified installation of sub-bus users - Select Control module for sterring whell touch reconition - Set to Yes Select CU44 - Select Long coding - Select Lane Assistance - Set to ACTIVE For Heated steering wheel: Select Gateway 19 - Select Adaptation - Select Multi-function steering wheel control module-Steering wheel heating button - Set to Active Select Air conditioning 08 - Select Adaptation - Select Steering wheel heating - Set to short_push - Select Long coding - Select Heated steering wheel and heated steering wheel automatic mode - Set to Installed As well i will post a link with the KLR module from aliexpress that make the take over steering message to disapear and the car to drive without your hands on the wheel unlimited time (not recommended)The KLR module is sitting on the bottom of the steering wheel and is quite easy to swap the boardshttps://www.aliexpress.com/item/1005008795628656.html If admin think this topic is useful you can pinned it Good luck and enjoy driving your Skoda

what year is your mk4? Most likely your telematic module needs updated

Some modules are vin locked so when you replace them you need online acces to code it for your car But this one look like is not one of them so good Thanks

The new module will be needed online svm or will work right away? And the additional wiring you mean the red and brown ones or is something more than that?

Thank you for your information

Can clone vas 6154a do online svm? Flashing 144f always failed and have to flash back 067 to make the ocu working again I need online svm before 144f flashing or after?and in quided functions what I need to select?thanks

I'm having a vas6154a clone and if im not wrong can do doip Can you help me to do it remotely?no need to be for free Thank you

Can you help me to do it?I have odis 23 and 6154a.no need to be for free

Can you pm me please?

Is hard to do that?or can be done remotely?