Lee01

Have a read of this https://www.briskoda.net/forums/topic/535400-option-to-enabledisable-dynamic-led-rear-indicators/

Or cause one by shouting and prodding aforementioned driver 🙄

@Crai I don't know for the Octavia you have but I believe Carista can disable the bulb check for my Rapid. It may be possible to use that or similar or VCDS to code out the fog light bulb check on your Octavia?

Actually after thinking, you would probably have to do it for both sides to avoid the bulb out error.

My 2014 LHD (in Germany) Rapid has a single foglight on the rear only on the driver's side What about extending the wiring from the your driver's side to the passenger side or must it have two foglights?

Hello @GraemeFish and welcome to Briskoda 👋

Have a read of this thread https://www.briskoda.net/forums/topic/492072-axle-standjack-point-location/ For the rear, I'd suggest putting the axel stands under the rear beam.

Hi and welcome to Briskoda @woosydiver 👋

Hi 👋 and welcome back to Briskoda @BlackEdition72

Reacting then maybe 🤔

I hope they've heard of galvanisation by now.

Hi @Trickiejohn and welcome to Briskoda 👍

Jack goes under the round part. Use a suitable trolley jack with a rubber pad.

Škoda StoryboardSmall parts instantly, a bumper in a few days: 3D printin...Škoda Auto has been using 3D printing in its development department for almost 30 years. The company recently opened a new 3D printing centre equipped with 16 printers, many of which operate almost...

Top GearBreaking news: TVR is back! Again! And it’ll go electric...Charge Holdings announces TVR as its subsidiary, will now build the Griffith

Mike and Elvis did a 2CV Fourgonette. Very rare four seater version @pinkpanther https://www.youtube.com/watch?v=Li5rggTtFEY

Northern lapwings I think. Not yer soft southern lapwings

Is it possible at all to remove the one from the other side and get a copy 3D printed I wonder?

Lovely sunset this evening.

3 pack on the Bezos UK https://www.amazon.co.uk/PNY-3-Pack-Elite-X-Type-C-Flash/dp/B0DSLQQLGC?th=1

If there is I believe it would be on it left from when it was moulded/ formed in the factory.

Good evening @Shultzy and welcome to Briskoda 👍

A thousand times that!

Got a 3 phase socket in our basement. Not installed by us but I suspect from when the house was built in the 80s. Fairly common AIUI

I don't know but I suspect removal of the wheel arch liner will be needed.