Skip to content

Climatronic buttons

Featured Replies

Might be a daft question but what is the middle buttons for on the climatronic dash? The outer ring makes the heater blow more/less but waht are the 2 blanks for? are they for something that was a factory option?

Thanks

the small black bit inbetween the 2 buttons is the temp sensor

I dont think they ever did have anything there button wise as even in the manual which shows a fully kitted model they are blanks.

In non climatronic its not a outer ring to adjust, the entire thing moves so i'd say its aesthetics more than anything

Edited by ryan-re

You can do a mod and make the middle ring upper button into a on/off which appears on the vw version...just gently remove the upper blank, tip of say a knife with something covering it the prevent scratches...then you will see a raised section (looking down from the top)...just gentley cut this off and replace the blank. You should feel it turn into a switch as it can now move. You now have an on/off switch with is really useful. Sure if do a search on climatronic on/off modification you will find better instructions :)

Yup, did this mod in the car park of the dealer, 5 minutes after I bought it from them brand new in 2008.... asked the workshop guys for a stanley blade and then had them staring in amazement as I explained it and did it in front of them! :giggle:

He he I do wonder who knows more sometimes...my dealer had no idea with retro-fitting my Columbus unit...I ended up telling what to do and watch out for lol

Would the lcd be in blue then Mike??, how about doing the FL controls?

:happy:

post-16049-0-16438300-1361657944_thumb.jpg

  • Author

But can you not just turn it off by turning the blower all the way to off? Or is this somthing else?

Yes you can, but it is a small hidden mod, that allows you to do it with the click of that single button.

  • Author

fair enough, how easy is it to remove the button? That link doesnt give much detail of removing the button. I take its not a dash removal jobby!

Just try to lever the upper half out. You can do it with a screwdriver, but have to be very carefull not to damage the plastic.

Could also try it with an old bank card. As soon as it sticks out a bit, you can catch it with your nails.

Too slow, because I made a picture

post-16049-0-44279200-1361660507_thumb.jpg

  • Author

fair enough, will give me something to do when im stuck in traffic! :giggle:

Inserted a picture, bit dark but the ones with the flash were too big to upload.

  • Author

oh, so i remove the blank from the out side of the dials to get access to the blank/button.

Just go into the space between turning knob (for the fan) and the blank. Or the horizontal chrom line and the knob.

The blank in the picture is already a couple of mm out.

Will try this tommorow! Thanks for the tip guys.

I found in a very old post on Briskoda that the lower centre button is used for the factory option of a parking heater (Scandinavia)

Yes, I've seen a picture of this somewhere....lower part definitely used for Auxiliary/Parking heater which is not an option in the UK.

  • 1 month later...

hy, what i want to ask you guys: does any one manage to make the leds to illuminate? i add 2 led-s there where are misiing but not work, probaly some resistors or something. anybody foun a solution? thank you

Just went outside and done mine, worked a treat :-)

  • 10 months later...

Done mine. Niice. I might get a button if I can find one

Yeah it does. Ill keep an eye out for a button. Maybe they sell them separately

Pretty tasty at electronics & soldering, I'm wondering just how difficult it would be to get an LED working on that. Might have a look if there's space and daisy chain it to another of the LEDs in the unit. That'd make you jealous mike! ;)

Here is a view of the LED on the original VW unit I had taken mine out.

post-16049-0-75372100-1393779456_thumb.jpg

post-16049-0-04293100-1393779474_thumb.jpg

post-16049-0-71306200-1393779489_thumb.jpg

I think its do-able. And my company makes silver loaded epoxy so no solder! :) might just do it!

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.