Pasty Badge Group Buy #10

[PastyBoy]

The PMs have been backing up of late and now that the calendars are out of the way and are hanging on walls and sitting on desks all over the country I have the time to put into organsing another badge group buy.

  

Running in the same format as all the previous Group Buys the badges are a flexible self-adhesive backed vinyl printed with the chosen design and finished with a clear resin dome to give a pronounced finish and protection and durability.
They work equally well stuck over the OEM badge or in place of them.
They can also be shrunk down and used as alloy wheel or steering wheel centres too!

Pretty much anything goes - solid flat colours to a coloured vinyl are the best finish but full colour designs can be printed to white vinyl. 
The choice really is yours however a few for inspiration (and if you want any of these designs try to quote what i call them and your colour choice)

Retro




Autobot



Skoda Motosport



Custom Full colour designs
(I'd need you to supply "print ready" artwork for something this complex!)



OEM Badge minus the green

 

My version of the new 2013 Badge

 

 

Which can be done in whatever colour/colours one fancies

 

 

VRS logo on black
(see said they worked as alloy centres! )


 

Here is a link to the photobucket album where i have dumped most badge artworks and images

feel free to browse and let it guide your decisions

 

PastyBadge Design Gallery

 

However don't feel limited by this collection, and not everything i have produced is in there.

Everything is produced to order so you can be unique or have a badge shown in a different colour combo if required.

 

If you're interested start a list in the normal Group Buy fashion along with the sizing you want.

 

Quote

Pasty Boy - Retro - Silver on Black - 80mm x2

 

I've done most cars now but it is your responsibility to make sure you request the correct sizing!
As a very rough guide off the top of my head from memory

Fabia & Octy mk1 - 80mm bonnet and boot - 55mm alloy centres
Fabia & Octy mk2 - 80mm boot & 88mm bonnet - 55mm alloy centres
Superb mk1 - 88mm bonnet & 92mm boot
Superb mk2 - 90mm bonnet and boot

If in doubt.... get a ruler out!!

As a guide larger badges are about £10 and the alloy centres around £6 when produced on their own but normally come down to around £6.50 and £4 respectively.

Things like extra colours in the design, larger size, international shipping add to the cost but once the quantity is up to a sizeable amount I will discuss with the printer and sort out pricing and everyone will then get a PM to confirm their requirements, the costs there of, delivery details and payment details.

Once the quantity gets up to enough to warrant the maximum discount (generally around 100 badges) I shall contact everyone via PM to confirm design, sizing and cost; and to request payment.

Once all payments are in I shall hit the button! 
 

Generally these things take a month to go down and then a couple of weeks to be produced and posted

Any questions ask away 

[@Lee]

this is probably the best quality .jpg of the old old old old even older than old skool :wonder:  badge I can find. SWMBO is a big art nouveau fan and love this badge, plus it will blend nice on the red n black Yeti

 

[PastyBoy]

wowzers

that'll need testing.

i get it sent to my man tomorrow and see what it comes out like :thumbup

[@Lee]

wowzers

that'll need testing.

i get it sent to my man tomorrow and see what it comes out like :thumbup

yeah, I know It's what she likes though :( Happy to pay a bit on top if it's a special order

 

Found this, maybe more 'puter/ ink/ printer friendly?

 

 

 

[howley87]

this is my first group buy so if you can keep my right with how and when to pay I'm after:

 

"OEM badge minus the green" 80mm (mk1) X2

also after:

"VRS logo on black"  for the centre caps, but I can't make up my mind about the alloys, so can't say a size yet. :think:  will have an answer in the next couple of days if thats cool?

 

appreciate it,

 

Chris

[Sam84]

What size is the steering wheel badge?

Rsam84 - OEM Badge minus the green - 80mm x 2 + steering wheel badge same style.

Thanks sam

[jayesh0507]

jayesh0507 - OEM Badge minus the green - 14mm (for flip key) x 2

[howley87]

this is my first group buy so if you can keep my right with how and when to pay I'm after:

 

"OEM badge minus the green" 80mm (mk1) X2

also after:

"VRS logo on black"  for the centre caps, but I can't make up my mind about the alloys, so can't say a size yet. :think:  will have an answer in the next couple of days if thats cool?

 

appreciate it,

 

Chris

Didn't think about the Key! well done that man!

 

"OEM minus the green" 14mm X1

 

Please.

[BJB540]

Another Pasty Badge Group buy, can't miss the chance!

 

I've tried to collate everything (so far) if that's helpful.

 

1) Pasty Boy - Retro - Silver on Black - 80mm x2

2) Lee01 - Super Retro Own image - Size??

3) Howley87 - OEM badge minus the green - 80mm (mk1) X2 - Also centre caps size to be confirmed.

4) Howley87 - OEM minus the green - 14mm X1

5) Sam84 - OEM Badge minus the green - 80mm x 2 + steering wheel badge same style.
6) jayesh0507 - OEM Badge minus the green - 14mm (for flip key) x 2

7) BJB540 - Skoda motorsport - 14mm (for flip key) x1 (if this is possibly Pasty?)

[PastyBoy]

Found this, maybe more 'puter/ ink/ printer friendly?

 

I've managed to find that second visual in the high res format i need.

shall get some samples run and see what they come out like

 

What size is the steering wheel badge?

 

 I've done them at 55mm before but other have shrunk them down to 45 or 40mm - get a ruler out and let me know

 

I've tried to collate everything (so far) if that's helpful.

 

Thanks Buddy have cleaned it up a bit more

 

Lee01 - Super Retro L&K Badge - ??mm x ?

Howley87 - OEM badge minus the green - 80mm x2 and 14mm x 1- VRS on black ??mm x 4

Sam84 - OEM Badge minus the green - 80mm x 2 + ??mm x 1

jayesh0507 - OEM Badge minus the green - 14mm x 2

BJB540 - Skoda motorsport - 14mm x1

 

In all honesty while 14mm key badges are possible in think the Skoda Motorsport ones will be too small to actually make out at that size.

 

If those with stuff in blue can confirm ASAP

[BJB540]

 Thanks Buddy have cleaned it up a bit more

 

In all honesty while 14mm key badges are possible in think the Skoda Motorsport ones will be too small to actually make out at that size.

 

No worries, thought it better to get the list going now rather than having to trawl through a ton of posts later on!

 

I thought that might be the case (Skoda Motorsport), so to save testing and messing about I'll just change it.

 

Lee01 - Super Retro L&K Badge - ??mm x ?

Howley87 - OEM badge minus the green - 80mm x2 and 14mm x 1- VRS on black ??mm x 4

Sam84 - OEM Badge minus the green - 80mm x 2 + ??mm x 1

jayesh0507 - OEM Badge minus the green - 14mm x 2

BJB540 - Retro (Silver on black) - 14mm x1

[howley87]

can i have till sunday to confirm? need to nip up to the steadin at the weekend and pick them up. 

[@Lee]

I'll measure it as soon as, but being the Yeti I'd imagine it's close to three and a half foot in diameter

[BJB540]

I'll measure it as soon as, but being the Yeti I'd imagine it's close to three and a half foot in diameter

 

Really that small?

[PastyBoy]

I'll measure it as soon as, but being the Yeti I'd imagine it's close to three and a half foot in diameter

 

Previous ones i did were 110mm across for the rear door

 

 

[VRSGoodall21]

You still doing these? And how much for retro- black background and yellow logo and yellow ring?

[PastyBoy]

Yep still collating the list.

Retro badges normally come down from the normal £10 to £6.50

[vRS19TD]

Lee01 - Super Retro L&K Badge - ??mm x ?

Howley87 - OEM badge minus the green - 80mm x2 and 14mm x 1- VRS on black ??mm x 4

Sam84 - OEM Badge minus the green - 80mm x 2 + ??mm x 1

jayesh0507 - OEM Badge minus the green - 14mm x 2

BJB540 - Retro (Silver on black) - 14mm x1

vRS19TD - John Special Green on Grey - 14mm x2

[Zuhayb]

Do you have any Black and Silver Skoda badge for Octavia MK2?

[@Lee]

Lee01 - Super Retro L&K Badge - 110mm x 2
Howley87 - OEM badge minus the green - 80mm x2 and 14mm x 1- VRS on black ??mm x 4
Sam84 - OEM Badge minus the green - 80mm x 2 + ??mm x 1
jayesh0507 - OEM Badge minus the green - 14mm x 2
BJB540 - Retro (Silver on black) - 14mm x1
vRS19TD - John Special Green on Grey - 14mm x2

[tempra007]

Pasty, can I have a set of the Black on red 2013 style but a custom size if I get you the size? (the OZ wheels have a large centre cap than the OEM ones) 

[Harry1212]

I will let you know in a few days, hope it's still running by then, missed it last time :(

 

Only thing is that i ordered some new style badges recently from elsewhere, but they have not been dispatched yet so im going to try and cancel or wait for them to arrive and return them

[tmwarner]

Lee01 - Super Retro L&K Badge - 110mm x 2

Howley87 - OEM badge minus the green - 80mm x2 and 14mm x 1- VRS on black ??mm x 4

Sam84 - OEM Badge minus the green - 80mm x 2 + ??mm x 1

jayesh0507 - OEM Badge minus the green - 14mm x 2

BJB540 - Retro (Silver on black) - 14mm x1

vRS19TD - John Special Green on Grey - 14mm x2

tmwarner - Retro (Silver on black) - 14mm x1

[Housey80]

Lee01 - Super Retro L&K Badge - 110mm x 2

Howley87 - OEM badge minus the green - 80mm x2 and 14mm x 1- VRS on black ??mm x 4

Sam84 - OEM Badge minus the green - 80mm x 2 + ??mm x 1

jayesh0507 - OEM Badge minus the green - 14mm x 2

BJB540 - Retro (Silver on black) - 14mm x1

vRS19TD - John Special Green on Grey - 14mm x2

tmwarner - Retro (Silver on black) - 14mm x1

Housey80 - OEM Badge with the green - 65(?)mm x4

I think thats that right size as I got some seat alloys for my winter wheels and wanted to match up all the bages. I'll double check the measurements and confirm asap.

[tempra007]

ee01 - Super Retro L&K Badge - 110mm x 2
Howley87 - OEM badge minus the green - 80mm x2 and 14mm x 1- VRS on black ??mm x 4
Sam84 - OEM Badge minus the green - 80mm x 2 + ??mm x 1
jayesh0507 - OEM Badge minus the green - 14mm x 2
BJB540 - Retro (Silver on black) - 14mm x1
vRS19TD - John Special Green on Grey - 14mm x2
tmwarner - Retro (Silver on black) - 14mm x1
Housey80 - OEM Badge with the green - 65(?)mm x4

Tempra - 1 set back on red wheel centres 55mm - 1 set wheel centres red on black 60mm (both 2013 version)