Thomasaspin - pics up when you've done the carbon fibre?

Sorry exhaust pic didnt upload

http://s1381.photobucket.com/user/Theo_Brace/media/Mobile%20Uploads/Screenshot_2015-01-22-21-17-44_zpsd496eb1d-1.png.html?sort=3&o=0

That last grille pic let you see what you wanted ang9444?

What is the opinions on the exhaust then chaps?

Looks too low IMO, has the valence been cut like a vRS or is it just sitting below the bumper line.

No its cut in a fair way mate hard to tell black on black ill get another to try and show that...

http://s1381.photobucket.com/user/Theo_Brace/media/Mobile%20Uploads/Screenshot_2015-01-22-21-52-14_zps1e1c8e3b-1.png.html

Close up valence looks dusty but you get the picture...

Doesn't look too bad in that pic, just thought it looked too low in the first ones.

http://s1381.photobucket.com/user/Theo_Brace/media/Mobile%20Uploads/Screenshot_2015-01-22-21-52-14_zps1e1c8e3b-1.png.html

Close up of cutout

Woops added same pic twice my bad

Probably the angle i took the first one at gaz

That last grille pic let you see what you wanted ang9444?

Yeah good pic, just wanted to see what it looks like on a red monte haha

just to keep you updated due to the car sitting slightly arse up ive refitted my sub in an effort to make it sit flat. kept it oem though by wiring it into the standard headunit. Pig of a job!!

let me know how you get on de badging your monte front and back mate as i want to do mine! and heres a picture of my new grill with the facelift badge from skoda will be adding carbon fibre to the old grill top as soon as the vinyl arrives and de badging it and putting some new red badges I've bought

 

 

 

debadgeing was very easy heat the glue behind with a hairdryer pull on one of the corners slightly and run a bit of thread behind it then autoglym intensive tar remover cleaned it up on mine

Depending on time and weather this weekend going to try and tint my rear lights... mudflaps on order soon!!

Depending on time and weather this weekend going to try and tint my rear lights... mudflaps on order soon!!

What are you using to tint them? And can you put pics up as i'm have been debating tinting mine for ages but don't know if i should

So here she is with the lights done and i can't believe the difference!!! One of the best mods Ive done im going to do the fogs too if the rain stops. nearly ready for the shows now

Also that second picture is straight out the camera shes had a bit of a shining up today!!

Did you use fly eye mesh type stuff? I did my rear lights and fogs, nice cheap mod. Looks really good on the black BTW, good job!

Sent from my SM-N9005 using Tapatalk

Edited 21 February, 201511 yr by jonro2009

Sprayed them

Have you thought about putting the new Skoda badge on the boot?

Sent from my SM-N9005 using Tapatalk

Spray, that's good. I'm no good with a spray can so the mesh was my only choice lol.

Sent from my SM-N9005 using Tapatalk

It really finishes the rear of your car nicely. Out of interest have you checked the reflector still does its job? I always wondered how it works with spray. Was it easy? It does look good and I reckon it looks better than mesh. Have you got a link to the spray?

Sent from my SM-N9005 using Tapatalk

Its ok to do.

Clean the light on the car when you wash it.

Remove the cluster

Degrease it i used gunk super degreaser which seems really good

Dry

Then spray super light coats to start with building it up slightly leave about 20 mins between each coat

Leave to dry then replace

http://www.amazon.co.uk/HYCOTE-XUK436-Smoke-Paint-Aerosol/dp/B004SMLEB0

I dont like the new badge might tint mine so its darker though