Hello.

Can someone please help me code the folding mirrors to open with ignition and not unlock?

Thanks

@wg100 ?

52 minutes ago, themanwithnoaim said:

@wg100 ?

Car is at the garage awaiting its fate at the moment... Will have a look should it return fit for duty.

Maybe this:

 

Depending on the modules generation you can either do it with VCDS or need to modify the EEPROM (not possible with VCDS) to enable mirror folding. 

You can determine the version by checking the label file name for module 42 in the Autoscan:
MAX3 - will require EEPROM change
GEN4 - possible through adaption


For GEN4 it goes like this:
ECU 42 > Login: 04354 > Adaption > Channel "(9)-System_Parameter_0-System Parameter Byte8" > set value to "95" or "99"

90 = default value
95 = mirror folding via keyfob and automatic opening on ignition on
99 = mirror folding via keyfob and automatic opening on driver door open

Depending on the units you have it may not be possible too going by some google searching.

14 hours ago, Plantman said:

Maybe this:

 

Depending on the modules generation you can either do it with VCDS or need to modify the EEPROM (not possible with VCDS) to enable mirror folding. 

You can determine the version by checking the label file name for module 42 in the Autoscan:
MAX3 - will require EEPROM change
GEN4 - possible through adaption


For GEN4 it goes like this:
ECU 42 > Login: 04354 > Adaption > Channel "(9)-System_Parameter_0-System Parameter Byte8" > set value to "95" or "99"

90 = default value
95 = mirror folding via keyfob and automatic opening on ignition on
99 = mirror folding via keyfob and automatic opening on driver door open

Hey!

I found that info from google too.

I'm using OBDeleven and couldn't find an adaptation under that name in module 42.

Unsure about my module version but I'll take a look at it.

I remeber changing something in module 09 on my previous owned Ibiza but couldn't find it anymore(it wasn't MQB like the octavia).

Thanks for your help!