1 hour ago, Gizmo said:

 

Not all Suburbs have the A5 camera fitted.

 

It all depends on the trim level or way the car was specced from the factory.

 

Er, yes. Thought this was common knowledge.

You need the big camera to enable lane assist.

You have it if your car has traffic sign recognition or the high beam assist by factory

26 minutes ago, Egk said:

Er, yes. Thought this was common knowledge.

 

Unfortunately not all members know this, some have bought the SE L assuming the A5 camera was fitted, likewise I have had a few requests to code cars that do not have the correct hardware.

So is it true that it is impossible to activate Traffic Sign Recognition on Superb FL 2020 m.y.? Like, no way at all?

 

Can a Skoda Dealer do that (for a bunch of bucks of course)?

Hello.  Who knows how it is possible to activate eyelashes for superb fl 2020?  The old method doesn't work

On 21/02/2020 at 13:30, Egk said:

 

Here is the coding for the lane departure warning and lane assist working in my MY20 Superb Combi. Camera is the new Valeo cam "MQB MFK 3.0":

 

STG A5 > Codierung > …

> Byte 05 > Bit 6 aktivieren („ACC“, 1-coded)
> Byte 08 > Bit 5-7 auf "A0 Point_of_Intervention,late_setting_over_menu" setzen
> Byte 09 > Bit 0-1 auf "03 Configuration_for_lane_departure_warning_kl15,Last_setting" setzen
> Byte 09 > Bit 2-3 auf "0C Lane_Assist_system_mode,Selection_over_menu" setzen
> Byte 09 > Bit 7 aktivieren („HC“, 1-coded)
> Byte 17 > Bit 0 aktivieren ("HC_messages,1-coded")
> Byte 17 > Bit 1-3 auf "02 Warning_intensity,Menu" setzen
> Byte 17 > Bit 5-7 auf "20 HC_Variante_1" setzen

 

STG 5F > Anpassung > …

> Kanal "Car_Function_List_BAP_Gen2-LDW_HCA_0x19" > Wert auf "aktiviert" setzen
> Kanal "Car_Function_List_BAP_Gen2-LDW_HCA_0x19_msg_bus" > Wert auf "Datenbus Extended" setzen
> Kanal "Car_Function_Adaptations_Gen2-menu_display_Lane_Departure_Warning" > Wert auf "aktiviert" setzen
> Kanal "Car_Function_Adaptations_Gen2-menu_display_Lane_Departure_Warning_over_threshold_high" > Wert auf "aktiviert" setzen

 

STG 17 > Codierung > …

> Byte 04 > Bit 6 aktivieren ("Spurhalteassistent / Lane Assist verbaut")
> Byte 11 > Bit 1 aktivieren ("Spurhalteassistent / Lane Assist Information (BAP) verbaut/aktiv")

 

STG 44 > Zugriffsberechtigung: 19249 > Codierung > Byte 03 > Bit 0 aktivieren ("Spurhalteassistent verbaut")

Hi, I have a MY20 SEL which has HBA, am I right in thinking that I could get lane departure warning and lane assist activated?

 

Also, I'm considering purchasing obd11, would it be possible to do the coding for these with obd11, or would it require VCDS? 

 

One other query.... I would I've to retrofit an OEM reversing camera. Has anyone done this on a FL version yet? My Skoda dealer tried but couldn't find where it needed to be activated! 

 

Thanks!

1 hour ago, -Adam- said:

Hi, I have a MY20 SEL which has HBA, am I right in thinking that I could get lane departure warning and lane assist activated?

Do you have the A5 camera or the 20 camera?

 

A5 = yes, 20 = no

8 minutes ago, PetrolDave said:

Do you have the A5 camera or the 20 camera?

 

A5 = yes, 20 = no

Is there a way to check which one visually, or will it need to be plugged in to scan it?

11 minutes ago, -Adam- said:

Is there a way to check which one visually, or will it need to be plugged in to scan it?

 

If you only have high beam assist, it's probably a lowline. If you have either lane assist or traffic sign recognition, it's a highline.

 

Typically the following is true:

- A lowline (20) camera is built into the rear view mirror base.

- A highline (A5) camera is stuck directly to the windscreen and have a triangular cutout to 'see' through.

 

Example lowline:

 

Example highline:

Thanks, not the best picture from my side, but I'm 99% certain I have the highline camera. 

 

My rear view mirror definitely doesn't look like the lowline one above. 

6 hours ago, -Adam- said:

Thanks, not the best picture from my side, but I'm 99% certain I have the highline camera. 

 

My rear view mirror definitely doesn't look like the lowline one above. 

Hello, on my superb 2020, I activated lane assist using the car scaner program of a Russian developer.  This requires an elm327 adapter and a program.  Besides this, there are many additional settings.

3 minutes ago, Nurlan said:

Hello, on my superb 2020, I activated lane assist using the car scaner program of a Russian developer.  This requires an elm327 adapter and a program.  Besides this, there are many additional settings.

Thanks. Do you have a link to what you used so that I can check it out?

1 hour ago, -Adam- said:

Thanks. Do you have a link to what you used so that I can check it out?

https://www.carscanner.info/

9 hours ago, -Adam- said:

Hi, I have a MY20 SEL which has HBA, am I right in thinking that I could get lane departure warning and lane assist activated?

 

Also, I'm considering purchasing obd11, would it be possible to do the coding for these with obd11, or would it require VCDS? 

 

One other query.... I would I've to retrofit an OEM reversing camera. Has anyone done this on a FL version yet? My Skoda dealer tried but couldn't find where it needed to be activated! 

 

Thanks!

OBD11 is perfectly fine for all of this!

On 21/02/2020 at 13:30, Egk said:

 

Here is the coding for the lane departure warning and lane assist working in my MY20 Superb Combi. Camera is the new Valeo cam "MQB MFK 3.0":

 

STG A5 > Codierung > …

> Byte 05 > Bit 6 aktivieren („ACC“, 1-coded)
> Byte 08 > Bit 5-7 auf "A0 Point_of_Intervention,late_setting_over_menu" setzen
> Byte 09 > Bit 0-1 auf "03 Configuration_for_lane_departure_warning_kl15,Last_setting" setzen
> Byte 09 > Bit 2-3 auf "0C Lane_Assist_system_mode,Selection_over_menu" setzen
> Byte 09 > Bit 7 aktivieren („HC“, 1-coded)
> Byte 17 > Bit 0 aktivieren ("HC_messages,1-coded")
> Byte 17 > Bit 1-3 auf "02 Warning_intensity,Menu" setzen
> Byte 17 > Bit 5-7 auf "20 HC_Variante_1" setzen

 

STG 5F > Anpassung > …

> Kanal "Car_Function_List_BAP_Gen2-LDW_HCA_0x19" > Wert auf "aktiviert" setzen
> Kanal "Car_Function_List_BAP_Gen2-LDW_HCA_0x19_msg_bus" > Wert auf "Datenbus Extended" setzen
> Kanal "Car_Function_Adaptations_Gen2-menu_display_Lane_Departure_Warning" > Wert auf "aktiviert" setzen
> Kanal "Car_Function_Adaptations_Gen2-menu_display_Lane_Departure_Warning_over_threshold_high" > Wert auf "aktiviert" setzen

 

STG 17 > Codierung > …

> Byte 04 > Bit 6 aktivieren ("Spurhalteassistent / Lane Assist verbaut")
> Byte 11 > Bit 1 aktivieren ("Spurhalteassistent / Lane Assist Information (BAP) verbaut/aktiv")

 

STG 44 > Zugriffsberechtigung: 19249 > Codierung > Byte 03 > Bit 0 aktivieren ("Spurhalteassistent verbaut")

Just tried this on a MY2021 SEL iV but I’m getting an ALA unavailable message.

 

Am I missing something? Is there an MMI reboot that I need to do for the codings to become active?

performed on OBD11 Pro

 

Any help would be greatly appreciated 

STG A5 > Codierung > …

> Byte 05 > Bit 6 aktivieren („ACC“, 1-coded)

Dont need these

30 minutes ago, 337 said:

Just tried this on a MY2021 SEL iV but I’m getting an ALA unavailable message.

 

Am I missing something? Is there an MMI reboot that I need to do for the codings to become active?

performed on OBD11 Pro

 

Any help would be greatly appreciated 

 

MMI reboot and having the CAN go to sleep (by leaving the car off for like 30mins) is needed.

4 hours ago, Egk said:

 

MMI reboot and having the CAN go to sleep (by leaving the car off for like 30mins) is needed.

Following some advice in addition to this, namely clearing the errors reported by the control units during the setup process.. I now have fully functional ALA.

 

Thank you

Would like this on my MY21 L and K iV. Are there any implications with warranty etc. on a new car.

30 minutes ago, stephenlumley said:

Would like this on my MY21 L and K iV. Are there any implications with warranty etc. on a new car.

There shouldn’t be, I activated this on my previous lease car and it was never an issue.

 

However if you’re nervous about the issue, you could always revert the settings when you take the vehicle in for service.

Has anyone seen this before.. found on another site.

 

It's pretty much eveything you can do VCDS wise on the MQB platform

 

https://onedrive.live.com/view.aspx...t=file,docx&app=Word&authkey=!ACw9SCZllyg95KU

 

In german, but easily translated.

 

Very useful!

 

 

Topic was started for VZE activation on new Skoda Superb Facelift....   Not for circus for all adaptions....

2020 Superb sing Assisttt coding ?

Traffic Sign Assist Activation

1. Control Unit 5F - Information


Adaptation

Car_Function_List_BAP_Gen2
traffic_sign_recognition_0x21 = Activated, then Green tick

Car_Function_Adaptions_Gen2
menu_display_road_sign_identification = Activated, then Green tick



8. Control unit A5 (front / advance camera)


Security access - 20103
Control unit Long Coding 

Byte 16 
Bit 04 Activate , then Green tick


13. Control unit 17 (Dashboard)


Control unit Long Coding 

Byte 5
 Bit 02 Activate, then Green tick

On 12/10/2020 at 08:10, caner991 said:

Traffic Sign Assist Activation

1. Control Unit 5F - Information


Adaptation

Car_Function_List_BAP_Gen2
traffic_sign_recognition_0x21 = Activated, then Green tick

Car_Function_Adaptions_Gen2
menu_display_road_sign_identification = Activated, then Green tick



8. Control unit A5 (front / advance camera)


Security access - 20103
Control unit Long Coding 

Byte 16 
Bit 04 Activate , then Green tick


13. Control unit 17 (Dashboard)


Control unit Long Coding 

Byte 5
 Bit 02 Activate, then Green tick

 

 

Does that really work for the 2020 Facelift model?  

On 12/10/2020 at 09:10, caner991 said:

Traffic Sign Assist Activation

1. Control Unit 5F - Information


Adaptation

Car_Function_List_BAP_Gen2
traffic_sign_recognition_0x21 = Activated, then Green tick

Car_Function_Adaptions_Gen2
menu_display_road_sign_identification = Activated, then Green tick



8. Control unit A5 (front / advance camera)


Security access - 20103
Control unit Long Coding 

Byte 16 
Bit 04 Activate , then Green tick


13. Control unit 17 (Dashboard)


Control unit Long Coding 

Byte 5
 Bit 02 Activate, then Green tick

Can someone confirm this for 2020 Superb?