I have now had my SE 1.5 for three days.

 

This morning it raining but nothing from the wipers.  They are set to wipe when rain is detected in the settings.

 

Is there an auto position as I can't find anything in the manual just says to set it in the settings.

It should also be set one notch anticlockwise on the stalk.

39 minutes ago, john999boy said:

It should also be set one notch anticlockwise on the stalk.

Thought I tried this but it just seemed to be the normal intermittent wipe.

 

Does the position of the intermittent speed lever matter?

 

Am I expecting the wipe frequency to change depending on how heavy the rain is.

 

Will try again next time it rains.

Yes you should adjust the top switch too.

There shouldn't be a 'normal intermittent wipe' setting.

Stalk needs setting to int this will wipe once when activated and if settings set to auto wipe then it will wipe when it detects rain, also the speed setting will need changing on top if the stalk as you normally would. Thats the case with mine anyway and worked spot on so far 

Thank for the help.

 

Tried again tonight and it's as you describe.

 

Speed setting seems to change the sensitivity to amount of rain.

Where can I find the setting for "wipe when rain is detected?"

10 hours ago, Pig said:

Where can I find the setting for "wipe when rain is detected?"

Push the stalk up one notch? On the stalk there is a selector knob with four different intensities.

On 02/10/2020 at 18:55, Matmacka said:

also the speed setting will need changing on top if the stalk as you normally would

Actually this switch is not changing speed as such, rather sensitivity of the rain sensor (or in fact how wipers react to certain amount of rain).

Auto wiping in the rain is activated in the vehicle settings via the infotainment unit. 

Hello

I recently had my windscreen replaced and was told I had a rain sensor. The issue is that I've had my car for a few years and was totally unaware of any sensor as the wipers never came on by themselves, there's no option in the settings and viewing the sensor from the windscreen side doesn't show any optics at all.

I have removed the rear view mirror cover to find two connectors. I have also navigated the menu functions and found no option for the sensor. I know a sensor was removed a the time of the windscreen replacement and I did pay for a new gel pad.

I only wished I had taken a photo before it was installed but pritty sure it was totally black on one side.