10 hours ago, travs said:

No worries; I also bought McGard 28025SUB which are 41mm long locking wheel bolts that fit. Standard length is 27mm so these are more like 14mm long rather than 11mm but I tentatively tried them as suggested and there was no fouling behind the hub.

I would still just test each wheel (spin slowly when still jacked up) just in case (my experience at the mo is that nothing goes to plan)

@travs so from re-reading your first reply post to my question, did you use standard bolts for the 11mm spacers?

I have 10mm Eibach, see how they look on standard DCC setup.

And yes, I had to buy the longer bolts, and you should too.