Skip to content

Misfire at 29-32 mph in 4th gear

Featured Replies

Did find 05E 906 517 B on LLL parts but nothing for 05E906517A Its for a tiguan. Just wondering if someone has replaced it with a different part previously. May have to go to Skoda with vin etc and ask them.

Alasdair

Hope it stays that way.

Alasdair

  • Replies 58
  • Views 4.6k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Dont think there should be any oil on sparkplugs at all. Could be a valve stem seal thats worn or bad piston rings. Try a compression test Alasdair

  • Cylinder On Demand - when the ACT kicks in/out and switches the engine between a 2 cylinder one and a 4 cylinder one.

  • Sorry no idea what it would cost. I do all my own mechanics so a bit out of touch re costs but if its a valve stem seal then I assume labour charge will be more than parts. If its a bad piston ring th

Posted Images

  • Author
35 minutes ago, Alasdair1 said:

Did find 05E 906 517 B on LLL parts but nothing for 05E906517A Its for a tiguan. Just wondering if someone has replaced it with a different part previously. May have to go to Skoda with vin etc and ask them.

Alasdair

Hope it stays that way.

Alasdair

Screenshot_20251114_095019_Chrome.jpg

  • Author

Does a disappearing engine management light mean whatever the issue was has corrected itself ?

I was always under the impression light was there till it was cleared manually

I'd payed £115 for the charcoal box last night as I thought it was likely to be that due to me regularly overfilling 🙄

Probably will still get it changed though

Engines still misfiring in 2 cylinder mode !

Think some EML lights have to be reset depending on the severity of fault and others will reset themselves once car is stopped and started. If its gone out thats a bonus. Hope it stays off. As for the misfire reckon it might need a specialist to diagnose it if there are no fault codes stored related to it. I assume you have swapped coil packs etc to see if fault moves from cylinder to cylinder. It could be a wiring issue?

Alasdair

  • 1 month later...
  • Author

Do all garages now just rely on what the diagnostics say ?

Had car in at different VAG specialist yesterday for same issue , car still vibrating in 2 cylinder mode, got a call to be told no misfire codes showing.

So I asked if anyone had actually driven it to be told they were just reading the report they'd been given

So I asked if someone could actually drive it to acknowledge the issue, feel like banging my head against a wall

A lot of garages do rely on diagnostics. My old one (sadly retired) took cars out for a spin as well as scanning. He always said theres still a lot of mechanical bits on a car that scanners cant check plus you get a better idea of what might be wrong especially if its a sporadic fault with no codes. Hope they send a decent mechanic out with it.

Alasdair

6 minutes ago, Alasdair1 said:

Hope they send a decent mechanic out with it.

Sadly it seems most dealers and large independents only employ keyboard technicians not mechanics who actually understand the oily bits of cars.

I used to go out with mechanic at garage to show them the problem. Once a decent mechanic with loads of experience gets the problem its a lot easier to explain to them whats happening plus easier for them to diagnose. Hopefully they will get to the bottom of it for you.

Alasdair

  • 2 weeks later...
  • Author

Changed spark plugs today no oil on any of them , slight improvement with vibration but still an issue in 2 cylinder mode.

Thinking I might if its possible and not likely to cause other issues to have the act disabled

Is this possible and advisable to do ?

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.