Skip to content

Problems after ABS module replacement

Featured Replies

Hi, I'm in Australia and have a Mk II Superb Kombi. I had the ABS module replaced by a non-Skoda garage. Since then, the rear windows, electric seat adjusters and the cigarette lighter sockets don't work. Any ideas on what's going on?

Edited by TojaSkoda
More information

Have you checked fuses?

  • Author
52 minutes ago, pab567 said:

Have you checked fuses?

Yes, can't really work out which ones are for the seat or rear windows. Also, my interior fuse panel seems to be the reverse of what is shown in the manual?

Just take a test light and check all the installed fuses—both in the interior and in the engine bay.

  • Author
1 hour ago, Cairus said:

Just take a test light and check all the installed fuses—both in the interior and in the engine bay.

Thanks, that seems sensible, but are there any I shouldn't remove? I don't want to cause other problems. Oh, the rear doors don't central lock either.

Edited by TojaSkoda
More information.

Naturally, using a decent automotive test light, you check the fuse while it is installed to see if it is in good condition.

  • Author
17 hours ago, Cairus said:

Naturally, using a decent automotive test light, you check the fuse while it is installed to see if it is in good condition.

Ok, so fuses 13, 14, 15, 21, 22, 23 and 24 under the bonnet have no power to them.

I'm guessing there's a plug or two not plugged into the back of the board.

Any tricks to lifting the board out, I don't want to make things worse.

TIA

  • Author
57 minutes ago, TojaSkoda said:

Ok, so fuses 13, 14, 15, 21, 22, 23 and 24 under the bonnet have no power to them.

I'm guessing there's a plug or two not plugged into the back of the board.

Any tricks to lifting the board out, I don't want to make things worse.

TIA

My mistake, the under bonnet fuses are good. Just needed to turn on the ignition and those ones are live.

Interior fuses 32, 34, 35, 36, 37 and 38 have no power.

Edited by TojaSkoda
more info

I’ve just checked the wiring diagram for left-hand drive models. SB29—meaning fuse 29 in the engine bay fuse box—is a 50A fuse; it should be supplying power to the fuses that currently have no voltage.

  • Author
9 minutes ago, Cairus said:

I’ve just checked the wiring diagram for left-hand drive models. SB29—meaning fuse 29 in the engine bay fuse box—is a 50A fuse; it should be supplying power to the fuses that currently have no voltage.

Hi, thanks for your patience and time. There's no fuse in that spot. Maybe the cowboy mechanic who replaced the ABS removed it. Is it possible that 30 should be in the 29 spot? I'll get another one and see if that works.

IMG_7847.jpeg

Yes, missing

F28 is heating Windshield if you have.

When Not, this is the Error

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.