26DIPP

Cairus, I have not seen this. Still hoping for TSR. Do you have any links?

Which centre was this?

There is only the 2Q0 as far as I know.

Your car is L&K. The A5 2Q0 camera implies your are still shafted by VW / Skoda as far as updates and activations go. Even though this is classed as SwAP - Software As Product - they do not actually work it that way. They are not selling these products. I have tried and even written to the CEOs. Polite FO as reply. If you had a Octavia activation would be an option.

My daughter has 205/40-16 on her FII and she runs Toyo Celsius. She worked in the french Alps with proper snow the last 2 winters and she had very good grip.

The 2009 FII had cruise control as standard on some models, so you can retrofit it. You might have to do some coding. The steering wheel replacement should be o.k. If you get a different style steering wheel you have to source an airbag for that model. Seats all fit universally. Even Polo and some other models do.

Check your spark plugs and airfilter and do a scan for fault codes.

This is advice to people changing the suspension arms. Not sure if this cover on here. I was told that I am fitting size for size and would not need to check the tracking..... YOU DO NEED TO CHECK TRACKING. About 2000 miles later one of the front tyres is rubbed down on the inner edge enough that it has to be replaced. It would have been good for more than the 2000 miles. The car was toeing in very slightly on one side even though it was pulling straight.

Have you done any coding at all? Just to double check, your car in a UK RHD.

I am not sure what "svm" stands for, but plugging it in is plug and play. You just need to code it in later.

You are right Pete. I looked at the pre FL BCM. The FL BCM does have a LIN wire to the door controllers. The window regulators are both fused. 51 for driver, 52 for passenger controller.

The BCM controls the windscreen wiper motor, the HEATED wing mirror function. The BCM does not control the window motors, wing mirror motors. Do your windows work if you power them directly from e.g. a wire from the battery. Do you have power on the wires that go to the window switch and power going out of the switch?

This a screen shot from ODIS in Stg 42, driver door controller. Turn signal repeater is what you are looking for, but you can not modify it like other lights in Stg 09.

Are the mirror indicators not controlled by the door control module?

I have ODIS and VCP. TSR coding does not work. Is a 21 Kamiq a MIB3 car?

Are you saying that the French MOT / CAT requires by law a fog light on the left? Does it allow both sides? Do you have LED rear light clusters? Check your light cluster if you actually have a fog light on the other side. You can either pull a wire across and feed it into the empty connection place to check if the fog light lights up when activated. Close your boot lid to check. If your left fog lights works, simply pull a permanent wire across and leave the left disconnected or have both sides activated if that is legal.

Hi All, I want to replace the suspension arms on my daughter's FII from 2009. The VIN is TMBDC65J493165977. I have 2 questions. 1) I have found the correct shape arm, but looking on Autodoc they use the VIN in a way that I had issues with before. Their description for one of the arms is: Vehicle Identification Number (VIN) from: 5J-83172 974, 5J-8A502 657, 5J-8B503 032, 5J-8K450 961 does my FII qualify for this part? How do I read the VIN? 2) I also looked on buycarparts. They use another descriptor for the arms. They give a length: Length [mm]: 302 This length varies from 302 to 362.3 for the part number I need - 6R0407151. What does the length refer to? I guess it is short arm and long but what is the relevance for the FII?

If you want to retrofit a RVC and do not have the knowledge yet look up the instructions in the write ups on these. You will need to know some things as you will have your car appart to a fair degree.

I do not have PNs for the steering wheels with touch sensors, but it will be just like your 2 spoke steering wheel WITH the TA button on the right.

You need one with a travel assist button top right. It is blank on the SIII steering wheel if it does not have capacitance.

Does anyone have a admap file of their adaptations +/- codings of a 2023 Superb. I want to double check with mine as I have lost some adaptations. Can it be posted here or sent as PM please.

I want to replace the rear shocks on my daughter's Fabia. What shocks have people used as replacements?

I have wired the 2. fog light on our RHD 2023 SIII estate. I was pretty easy as described above. I had a look at the wiring diagrams before and it seems the same on LHD as on a RHD, just in reverse. I checked the left fog light first. There are 2 tiny LED elements in the fog on both sides when you look into it. I also checked for function first with a pin and loose wire and the fog light is still present on the left. I soldered the spare wire onto the grey / white wire in the 6 wire connector on the right and routed it to the left fog light connector / plug. I still had some spare pins from a previous retrofitting project. Above people mentioned that the fog light only works when the boot lid is closed. It can be coded that the fog light can be on when open. Coding in in Stg09 in Adaptations 07 Look for NSL - Nebelschlußleuchte (foglight) In the line "Lichtansteuerung" only if closed you can code to open. [VO]_Leuchte26NSL LA72: [LO]_Lasttyp 26: [VO]_43 - allgemeine LED [LO]_Lampendefektbitposition 26: 1C [LO]_Fehlerort mittleres Byte DTC-DFCC 26: 2F [LO]_Lichtfunktion A 26: [VO]_Nebelschlusslicht wenn kein Anhaenger gesteckt [LO]_Lichtfunktion B 26: [VO]_nicht aktiv [LO]_Dimmwert AB 26: 100 [LO]_Lichtansteuerung HD AB 26: [VO]_only_if_closed [LO]_Lichtfunktion C 26: [VO]_nicht aktiv [LO]_Lichtfunktion D 26: [VO]_nicht aktiv [LO]_Dimmwert CD 26: 0 [LO]_Dimming Direction CD 26: [VO]_maximize [LO]_Lichtfunktion E 26: [VO]_nicht aktiv [LO]_Lichtfunktion F 26: [VO]_nicht aktiv [LO]_Dimmwert EF 26: 0 [LO]_Dimming Direction EF 26: [VO]_maximize [LO]_Lichtfunktion G 26: [VO]_nicht aktiv [LO]_Lichtfunktion H 26: [VO]_nicht aktiv [LO]_Dimmwert GH 26: 0 [LO]_Dimming Direction GH 26: [VO]_maximize

I retrofitted the TA steering wheel. TA works. Lane assist (SWA) is different from travel assist. It warns if there is an object approaching from behind or next to you. TA keeps the car in the lane. I have the 2Q0 camera.