-
Car alarm siren
No I never had any issues with mine. ŠKODA Australia used to have the replacement of the Siren as part of the 6yr / 90,000km service. They no longer replace them as part of the service, as you know the price of these are very expensive. I located one from a "wreck" newer vehicle and just replaced it myself for minimal cost.
-
ope126 started following Phoenix vs Trinity alloys , Car alarm siren , How-to Guide to Upgrade MIB2 to MIB2.5 and 7 others
-
Car alarm siren
Having replaced the Siren in both my Passat and Superb, you are in the correct location. Base of the windscreen, in the plenum chamber, remove the plastic cowling and you will see if front and centre. If it is not there, possibly, you do not even have an alarm system, as that is the ONLY location for it on our cars.
-
How-to Guide to Upgrade MIB2 to MIB2.5
Thanks so much for putting this together mate! You are a star!!!
-
Front Grille Light Bar - done
Well done mate! Looks awesome (can't wait to see it lit up at night). Glad to see you wrapped your loom in TESA Tape!!!
-
What have you done to your Superb III today?
The worst "dazzlers" are Toyota Prado's!!! IFKYK
-
Coolant specs
Do you have the Part Number for the new Coolant Tank (without Silicone Bag)?
-
PR code for my Superb, to get correct brake discs and pads?
Simple really... 1) Contact your local ŠKODA Dealership (Parts Department), provide your VIN and ask for the front and rear Pads & rotors (part numbers), that way you can cross reference against Brembo, ATE or any other brand of your choice. 2) @JR RS has already provided you the PR Codes that you requested (as per the thread), so there is the answer to your question... 3) And I hope this helps you navigate the parts on the Brembo / ATE website's; Front 312mm x 25mm (vented) / Rear 300mm x12mm (solid) this will be your combination of rotor size. Get this info right and yo will find the product and/or variation that you need that is suitable for your fitment. Unless you have a 272/280 which will be Front 340x30mm (vented) / Rear 310x22mm (vented) Don't over think it...
-
Replacement Wipers
Regardless of the reason why you needed new wipers, that price seems rather excessive (but I guess that is a sign of the times). Everyone has their preference, but for me the Genuine ŠKODA wipers (Part No. 3V2998001) are affordable (in Australia at least) and do the job well. I would not go aftermarket, have tried and failed before... https://www.theskodashop.co.uk/products/skoda-front-wiper-blade-set-superb-iii
-
Under-bonnet insulation (silver heat reflective material)
Thanks for your response. I like what you have done, however that was not what I was looking for. I just wanted to see if the TDI version had the silver heat reflective material on the under-bonnet insulation as per the Passat (so from the factory - Genuine part).
-
Under-bonnet insulation (silver heat reflective material)
Question for ŠKODA Superb TDI owners... Do you have the silver heat reflective material on your under-bonnet insulation as per the picture below (which is my B8 Passat Alltrack for reference)...??? If possible, could you please post a picture for comparison.
-
Build Data Codes?
Also, I am confused mate... What is a Superb 208? You are in Australia right? I am sure you mean; ŠKODA Superb 206TSI 4x4
-
What to do to regain the mojo
I am confused mate... What is a Superb 208? You are in Australia right? I am sure you mean; ŠKODA Superb 206TSI 4x4
-
Build Data Codes?
Mate, don't over think it... These are the ŠKODA Genuine Part Numbers (for cross reference); (front rotors) –5Q0615301G (rear rotors) –5Q0615601E (front pads) –5Q0698151K (rear pads) –3Q0698451D (Front 340x30mm / Rear 310x22mm)
-
The Superb III Picture thread
Looks really great mate! Surprised you didn't wrap the chrome strip on the lower front grill section also!
-
Phoenix vs Trinity alloys
I think the cross over was around MY18.5. And for what its worth, the part numbers remain the same, so they are the same wheels.