zacko_O

Read DTCs in 5F Most probably you have B130C 13 or B130D 13

ok, the module I mentioned above is this

I have to ask, did you restart the climate module?

yes, only changed Heated_steering_wheel_version what Lin module do you use? I know that one of them sends extra command when you press button to enable/disable heating

Check what do you have in 08 Climate Control Module cdoing - Heated_steering_wheel_automatic_mode

I didn't get you, you wrote: "From factory the steering wheel was heated." My question was about module for Steering Wheel buttons? needed for View/Menu etc. Yesterday I helped to guy with Superb 2020, he had "old" style heated SW and installed new 2025 heated SW. He coded 3v0907044fa and all good - [LO]_Heated_steering_wheel_version: [VO]_LRH_Gen_2_mod

Did you install any module for steering wheel?

Need to replace lead wires to longer https://www.drive2.ru/l/659269097233580313/

Remove plastic cover from hatch and check wires

This is Arduino module that works with CAN bus(not LIN) and does not work correctly. The Travel Assist button for some reason triggers View. Double-clicking OK also triggers View. From the factory, this is how it works on the FL: Bottom left arrow - Menu Right arrow - View So, if you’re gonna retrofit TravelAssist, then it’s not possible with Arduino CAN module. E.g. for mid FL Superb(07.2019 - 07.2020) Travel Assist can be easily activated, just coding More details:

Carscanner probably the cheapest solution Guide for Kodiaq, but 99% same:

crazy price AFAIK they sell original and costs about 80EUR aliexpress.com/item/1005006263043091.html

Try 09 BCM - Adaptations and deactivate: [VO]_Aussenlicht_Blinker: [LO]_Richtungs_blinken_rechts: [VN]_active [LO]_Richtungs_blinken_links: [VN]_active

You can buy similar kit

Mib2-2.5 have old steering wheel Mib3 - new steering wheel and new VC At least for Superb 3, I guess same for Karoq

I did same for FL, no worries The difference is: preFL only DSG mode returns to Normal FL mode entirely returns to Normal For FL need a little bit more edits as described above

https://www.drive2.ru/l/677950899301124971/

well, don't trust blindly :) another topic about conversion - https://www.briskoda.net/forums/topic/526316-how-to-guide-to-upgrade-mib2-to-mib25/

Where did you find this version? I’m not sure that it’s exists. https://mib-helper.com/index.php?train=MHI2_ER_SKG11_P3304#details You can start conversion from P3***

Read here about conversion https://github.com/harman-f/MHI2_MIB2_AIO_FW_Update_Template/wiki/G11-to-G13-conversion

Same adaptation I texted above

AFAIK, you can replace just wheel. They all almost same, choose what you like more with buttons you need. btw, do you have last gen. of wheel or old one?

Yeah, clock spring now submodule of a BCM, when you change adaptation it changes coding of a clock spring. This guy had the same issue and it helped https://www.drive2.ru/l/601429288054438865/ I would try to buy another one, 5Q1 953 521 DH is not recommended, try to buy *LC

99% - yes

Did you enable this adaptation in a clock spring? [VO]_LIN-SMLS_konfig_2: [LO]_gra_grahebel_2_st: [VN]_installed