Cairus

It would be new to me that you can control the dynamic blinking via the mib

Normaly Index B

The speakers don't have a Canton label. There's a lot of marketing behind it.

I Connect every Control unit With Index B on KL15

Until Index B it is Kl15

Until Index B, the Power ist KL15

For Index B I have the note until production date 21.06.2021. If it is Index E in my opinion

Which Error Code have Odis ?

Day of Production from the Car? VIN?

@IvanMaihaus The latest Firmware is 0480 Password send me a Message https://mega.nz/#P!AgGWtzUFoIOM4t9fc-ytrUjaQcCFEvmu8jKphKDSB14nvb6R3neEHfChr0i8fyXQe6SkrUDjtl3vpPDZXRGV44NecBDE2by_C0hK_zDuHWDuB9bbfSd4gJMWyqcRA7qmbxxCSZ4ldow

Good morning everyone. The next parts are on the table. This time the DCC control unit and the gateway. Both are relevant for the DCC settings, which should then be done using a slider in individual mode. I'll first make sure it's running on the table. Then I'll edit the individual vehicle data sets and make them available. The Continental gateway needs to be flashed to Index AR. Caution: This can cause problems with the Side Assist Radar; it changes the protocol slightly in the gateway. Personally, I would then switch to the Lear gateway. Required Index AQ. Caution: Replacing the gateway means unlocking the CP and having the functions activated. Regarding equipment, you need a tool for writing the data sets, so not OBD11 or the like. For example, VCP or ODIS or VC Tool. The DCC unit need Firmware Index C with Software Version 0130 I'll keep you updated.

In my experience it will unfortunately not solve the problem

For Pr-code "9VS"

This is the BCM = This unit Managed the Light and Other things. AE ist the Index of unit. It's important that it's the same functional group. There are basically three versions: Low / Mid(+) and High. You always have to install the same or higher-quality version.

OEM Parts?

No warrenty 2x 5E0035411G Canton rear door speakers 2x 5E0035411D Canton front door speakers 2x 5E0035411H Canton mirror tweeters 1x 5E0035411E Canton front center speaker 1x 5E0035412 Canton subwoofer 1x 8V0035223 Canton sound system amplifier

Karoq? Maybe it will Help history.txt

This is normaly by a new batterie. If The SoC&SoH ist by 80% the BMS say Stop To the Generator. If The Car is Sailing, you have the "Fake" recuperation

This Parameter is for the City detection Main_Beam_Assist_Urban_Area_Detection

Sure, manuell you can Always Turn on the high beam light

I know how it works. But Not everybody here

Misunderstood, poor translation on my part. I meant that I think replacing the camera is unnecessary.

Why Change Camera? Firmware Update?

Share direct the Dataset?