Skip to content

FIXED - MY19 - enabling both rear fogs - not working - LED tail mod now available

Featured Replies

Hello all,

 

My experience with my VCDS is very hit and miss at the moment; latest thing I have tried to enable is both rear fog lights on my 2019 MY19 Octavia Scout.  The Scout has a part LED rear tail lamps - and I've checked that both bulbs are installed on the left hand side (my car is a RHD model).

I've been following the settings from:

and I've also enabled up the brightness from 0 to 100 on the BCM / 09 module.  Still nothing.....

I have done the usual trick of recoding - and performing a soft-reset on the 09 module - as well as turning off/on the car....still nothing.  I still only have the right hand side fog enable.

 

Your help and advice would be appreciated. 

 

Thanks

 

 

Max

 

Edited by varaderoguy
correcting my terminology & update title

Looking at your adpmap:

ENG116962-ENG116376-Leuchte26NSL LA72-Dimming Direction CD 26,maximize ,16
ENG116962-ENG116380-Leuchte26NSL LA72-Dimming Direction EF 26,maximize ,16
ENG116962-ENG116384-Leuchte26NSL LA72-Dimming Direction GH 26,maximize ,16
ENG116962-ENG116371-Leuchte26NSL LA72-Dimmwert AB 26,100 ,16
ENG116962-ENG116375-Leuchte26NSL LA72-Dimmwert CD 26,0 ,16
ENG116962-ENG116379-Leuchte26NSL LA72-Dimmwert EF 26,0 ,16
ENG116962-ENG116383-Leuchte26NSL LA72-Dimmwert GH 26,0 ,16
ENG116962-ENG116368-Leuchte26NSL LA72-Fehlerort mittleres Byte DTC-DFCC 26,2E ,16
ENG116962-ENG116578-Leuchte26NSL LA72-Lampendefektbitposition 26,0C ,16
ENG116962-ENG116366-Leuchte26NSL LA72-Lasttyp 26,not active ,16
ENG116962-ENG116372-Leuchte26NSL LA72-Lichtansteuerung HD AB 26,Always ,16
ENG116962-ENG116369-Leuchte26NSL LA72-Lichtfunktion A 26,Nebelschlusslicht wenn kein Anhaenger gesteckt ,16
ENG116962-ENG116370-Leuchte26NSL LA72-Lichtfunktion B 26,not active ,16
ENG116962-ENG116373-Leuchte26NSL LA72-Lichtfunktion C 26,not active ,16
ENG116962-ENG116374-Leuchte26NSL LA72-Lichtfunktion D 26,not active ,16
ENG116962-ENG116377-Leuchte26NSL LA72-Lichtfunktion E 26,not active ,16
ENG116962-ENG116378-Leuchte26NSL LA72-Lichtfunktion F 26,not active ,16
ENG116962-ENG116381-Leuchte26NSL LA72-Lichtfunktion G 26,not active ,16
ENG116962-ENG116382-Leuchte26NSL LA72-Lichtfunktion H 26,not active ,16

ENG116963-ENG116395-Leuchte27NSL RC6-Dimming Direction CD 27,maximize ,16
ENG116963-ENG116399-Leuchte27NSL RC6-Dimming Direction EF 27,maximize ,16
ENG116963-ENG116403-Leuchte27NSL RC6-Dimming Direction GH 27,maximize ,16
ENG116963-ENG116390-Leuchte27NSL RC6-Dimmwert AB 27,100 ,16
ENG116963-ENG116394-Leuchte27NSL RC6-Dimmwert CD 27,0 ,16
ENG116963-ENG116398-Leuchte27NSL RC6-Dimmwert EF 27,0 ,16
ENG116963-ENG116402-Leuchte27NSL RC6-Dimmwert GH 27,0 ,16
ENG116963-ENG116387-Leuchte27NSL RC6-Fehlerort mittleres Byte DTC-DFCC 27,2F ,16
ENG116963-ENG116579-Leuchte27NSL RC6-Lampendefektbitposition 27,1C ,16
ENG116963-ENG116385-Leuchte27NSL RC6-Lasttyp 27,9 - allgemeine Glühlampe 27W: auch H15 ,16
ENG116963-ENG116391-Leuchte27NSL RC6-Lichtansteuerung HD AB 27,Always ,16
ENG116963-ENG116388-Leuchte27NSL RC6-Lichtfunktion A 27,Nebelschlusslicht wenn kein Anhaenger gesteckt ,16
ENG116963-ENG116389-Leuchte27NSL RC6-Lichtfunktion B 27,not active ,16
ENG116963-ENG116392-Leuchte27NSL RC6-Lichtfunktion C 27,not active ,16
ENG116963-ENG116393-Leuchte27NSL RC6-Lichtfunktion D 27,not active ,16
ENG116963-ENG116396-Leuchte27NSL RC6-Lichtfunktion E 27,not active ,16
ENG116963-ENG116397-Leuchte27NSL RC6-Lichtfunktion F 27,not active ,16
ENG116963-ENG116400-Leuchte27NSL RC6-Lichtfunktion G 27,not active ,16
ENG116963-ENG116401-Leuchte27NSL RC6-Lichtfunktion H 27,not active ,16

 

So at a guess, I'd change "Leuchte26NSL LA72-Lasttyp 26" to "9 - allgemeine Glühlampe 27W: auch H15" and see what happens.

 

I know you've checked the bulb is there, have you also checked both sides have the same number of wires to the rear cluster?

  • Author

You are a genius!!!!!

 

Works like a dream.

20201109_144239.jpg

  • Author

The bulbs was in there and it looks like the wiring was also there too. You just had to tell BCM 09 module:

 

If you have a hybrid lamp (part LED and part incandescent) you need to do:

Leuchte26NSL LA72-Lasttyp 26" to "9 - allgemeine Glühlampe 27W: auch H15"

 

If you have a full LED taillamp e.g. VRS, you need:

Leuchte26NSL LA72-Lasttyp 26" to "40-Glühlampe-LED"

 

 

 

 

Edited by varaderoguy
for LED taillamp

1 hour ago, varaderoguy said:

You are a genius!!!!!

 

I wouldn't go that far, I just compared the two light channels and pointed out the difference :D

 

Glad to hear it worked though!

  • varaderoguy changed the title to FIXED - MY19 - enabling both rear fogs - not working
  • Author

Also wanted to mention that fog lights are still both on when headlights are in Right Hand Drive mode as well. Works for left and right hand driving modes.

  • varaderoguy changed the title to FIXED - MY19 - enabling both rear fogs - not working - LED tail mod now available
  • varaderoguy locked this topic
  • varaderoguy unlocked and locked this topic
Guest
This topic is now closed to further replies.

Recently Browsing 0

  • No registered users viewing this page.

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.