Hi guys. I tried to code lane assist for my 2019 SUPERB FL using Icar pro Vgate and car scanner pro. Lane assist is showing on dashboard and in the options but it doesn't work. The icon is yellow, car displays message that it is not currently available. What did I miss... A5 camera is 2Q0980653. Any help would be appreciated. Many thanks!

Maybe there is someone with Obd11 in Shrewsbury area wilkingvto help if car scanner can't perform this coding?

Are you certain that’s the part number of your camera? And did you definitely use the correct activation coding? There are different ones depending on camera hardware.

Yes, I checked in ECU identifiers and other activate coding would not work or is unavailable I'm sure coding is OK as it enabled lane assist but adaptive lane guidance is missing and probably need power steering coding. I'll have a look today.. It's almost there...

Does other assistance things work? sign recognition, lights etc. It could be as simple as the screen is dirty in front of the camera.

Have you been out for a drive with it enabled? Might need the car to recognise a roadway before it activates.

I don't have A5 camera so I am not sure, but I do use CarScanner for coding and not come across much that it can't do so far.

Everything else works fine, ACC, front assist, blind spot, rear traffic. Car is washed and took it on motorway few times... Still not working. It's there but somethung missing. I will ha e a look today if there is additional codo g for adaptive lane assist. I will update soon👍

Ok, tried other additional coding for lane assist and adaptive lane assist but no luck, still don't work.

I backed off all changes and revert car to it's previous state. I will have to try obd11 if find one unless someone will direct me in right direction with car scanner.

A5 Camera details:

Camera: 2Q0980653

System: MQB MFK 3.0

Software: 1030

Parameter set: V03935309JL

It is annoying as I was looking for being able to code lane assist 🙁

Cheers

48 minutes ago, Rafal78 said:

Everything else works fine, ACC, front assist, blind spot, rear traffic. Car is washed and took it on motorway few times... Still not working. It's there but somethung missing. I will ha e a look today if there is additional codo g for adaptive lane assist. I will update soon👍

All those other things use other sensors. The camera is used for traffic sign recognition, lane assist and high beam assist. Are those specifically working?

I haven't got road sign recognition but high beam assist and everything else is working. Maybe it's just not possible...

20 minutes ago, Rafal78 said:

I haven't got road sign recognition but high beam assist and everything else is working. Maybe it's just not possible...

It should be.

Perhaps try activating traffic sign recognition coding and see if that works. That will prove camera is working.

Only for Test, Not correct for your Car!!! Your own risk

00 03 08 88 11 EA C0 28 A8 DF 24 80 18 20 00 24 00 23 80 00 00 00 00 00 00 00 00 00 00 00 00

Safe your OEM Coding!!!!

Edited 17 June17 Jun by Cairus

I tried but came back with error straight away. As my camera is 2Q0980653 there are only option to code with use of camera and sat nav. I might try again. I found some comments from users who had to try coding Lane assist few times before it worked. Obviously bonnet up, I will turn headlight on too just in case...

Still hoping to find someone with obd11, maybe it's the way to go?

Just now, Cairus said:

Only for Test:

00 03 08 88 11 EA C0 28 A8 DF 24 80 18 20 00 24 00 23 80 00 00 00 00 00 00 00 00 00 00 00 00

Safe your OEM Coding!!!!

Already did backup, good point. Cheers, I can try that😊

Test Coding is with TRS

Ok I'm new to car scanner coding so I might need a bit of guidance here. Can you explain a bit more, please?

1 hour ago, Rafal78 said:

Ok, tried other additional coding for lane assist and adaptive lane assist but no luck, still don't work.

I backed off all changes and revert car to it's previous state. I will have to try obd11 if find one unless someone will direct me in right direction with car scanner.

A5 Camera details:

Camera: 2Q0980653

System: MQB MFK 3.0

Software: 1030

Parameter set: V03935309JL

It is annoying as I was looking for being able to code lane assist 🙁

Cheers

I have all the things you have too. FL 19 plate. 2020 car. No lane assistance. Never got it to work. I wonder is it an early FL issue?

37 minutes ago, defsix said:

I have all the things you have too. FL 19 plate. 2020 car. No lane assistance. Never got it to work. I wonder is it an early FL issue?

Have you tried obd11 or vcds? Seems like some facelift models are difficult to code. I know some FL superb 2019 with lane assist coded successfully... Weird...

I tried sign recognition but fails too. Error straight away but it's visible in infotainment... No luck for whatever I want to code....

Did anyone had an errorfir sign recognition but after longer drive it cleared? I restarted infotainment but still there, didn't go for drive yet. Or it doesn't work like that and should work after coding?

I have Sign recognition, ACC etc. when I coded LCA, it wouldn't engage on the menu. (Used Carista)

Lane change assist and lane guidance are different things. Change assist is blind spot detection and uses rear radars.

Are you certain high beam assist works? It might be fault with camera.

Otherwise I have seen on another forum that updating the software for the camera from 1030 to 1302 enables more features.

Hugh beam assist 100% works but there is slight issue. There is separate topic. High beam works fine on smaller A and B roads but on motorway is not illuminate left side as it should in auto. But it works, yes.. Have you got link to that forum by any chance? Would be good to have a look. I will try to find it. Is that Bfiskoda too? Thanks got your input 😎

Link to high beam assist issue

https://www.briskoda.net/forums/topic/520628-full-matrix-led-headlights-on-motorway/

https://forum.obdeleven.com/thread/12881/superb-2020-assist-coding-procedure

2 hours ago, Binx1310 said:

Lane change assist and lane guidance are different things. Change assist is blind spot detection and uses rear radars.

Are you certain high beam assist works? It might be fault with camera.

Otherwise I have seen on another forum that updating the software for the camera from 1030 to 1302 enables more features.

Sorry I got my abbreviations mixed up. I have the lane change assist, the flashing light on the inside of the mirror. Not the lane guidance...

So lane change assist and blind spot detection.. I'm missing lane change assist... 😢

1 hour ago, Binx1310 said:

https://forum.obdeleven.com/thread/12881/superb-2020-assist-coding-procedure

OK, interesting.

There is long coding number there for A5 unit. Also someone with similar to mine problems mentioned A5 camera software update from 1300 to 1302 fixed the issue as Binx1310 mentioned.

I have a choice now and hopefully you more experience colleagues could advise:

• Enter long coding in A5 unit and see if it work

• Find the file for software update/get it from Skoda 😬

• Forget it and try Obd11...

• Forget it altogether and accept defeat (not an option 😂)

Just to clear it - do I just change that long code value in long coding in A5 menu in Car Scanner? That's it?

Many thanks, hopefully I will get somwhere with this lane assist 😂

So long as you have your old long coding to go back to, it can’t hurt to try the other code. The trouble is it’s very dependant on the options fitted etc.

@Cairus may be able to advise better than I

In my Humble opinion obd11 isn’t much different to carscanner. Perhaps a bit more user friendly but they are two different ways of entering the same coding effectively. It may be that obd11 has a few more options that might work, but it seems from other forums the 2q0 camera is more tricky to code.

I'm tempted to try. He has same car, same hardware, older software, so that's OK. Only difference is I don't have sign recognition and I'm not sure if his is ditital cockpit, mine are analogue clocks.. I've got my long code saved and all original settings saved as a backup so I could try😎 will update