ords

Tried several times re-booting it & suddenly it gave me the source option on the sd Tried re-booting a few times & then it suddenly gave me the source option. All went thru smoothly, so thankyou for the advice.

I have the instructions from a couple of years ago & had the same problem then. I'll do what you suggest & re-boot with the usb already inserted & try the same with the sd card if that doesn't work. Thank you for your reply.

My problem is that when I want to choose the source, either usb or sd card the the 2 options are not highlighted. The unit recognises the usb stick or card when I insert them. Any ideas please? Thank you

These are just a couple of many threads on this forum. Just search for "dab" in this forum.

It tells you in the manual how to reset the one touch operation. No coding needed.

Sorry for the multiple quotes

This thread should help.

Another thread.

Near the end of page 1 of this thread is a possible answer.

How is the heater output? How long before you get any heat coming through?

Do some searching on this site. There are so many threads. Some ppl advise to tell the car its got a new battery, others say it's not needed.

The locking barrel is under a plastic cover on the drivers door handle. Just prise it off.

Presumably the car battery is ok now as you've changed it. I'd uncheck the setting for all doors. See if that then only unlocks the drivers door. If that's the case, then set it to open all doors. That may clear the fault.

Another couple of links.

Thanks for the info

I think you're lucky to get the glow plugs & heated windscreen changed. Looking at the wording in the link you posted, it says "It’s assumed in law that the fault was present at the time of purchase unless the seller can prove otherwise" Presumably the glow plugs & windscreen were working at the time of purchase.

If you had read thru this link I sent you it mentions 2 part no's