Jump to content

Prezafab

Members
  • Posts

    289
  • Joined

  • Last visited

Everything posted by Prezafab

  1. I didn't know you could still fit them. I bet they look good, even better with yellow plastic covers on an L&K, but I very rarely use fogs these days. I would definitely do the other exterior bulbs, but the whole Canbus thing sounds a pain.
  2. I've noticed that as I get older, I get more and more annoyed at anything that is badly designed. Car parts, food packaging, road junctions - you name it !
  3. I haven't thought about interior bulbs but I suppose they would look better. Can you buy as a set - I was put off LEDs for the outside because of errors, but I guess no issues for the interior ?
  4. Just wondering what you have done to your facelift Yeti that was worth doing ? Ours is a Dec 2017 registered SEL 4x4 DSG outdoor delivered to its first owner Feb 2018 which we've bought to keep 'forever'. Because of that we've done a few things which my other half wanted:- - Matterhorn alloys (because they looked great on our last Yeti) - SmartLink CarPlay (because we couldn't find an SE L Drive diesel at the time, with satnav) - Black door mirror caps (the grey ones are a bit nasty) - Body colour-co-ordinated (grey) bumper trim panels Looks really good now and mechanically we've had the cambelt changed and gearbox oil and filter done. Recommendations for what's worth doing next that you've done on your Yeti ?😃
  5. I'd bite two bullets. 1) New battery 2) C-tek trickle charger to refresh every 3 or 4 months. My old Subaru is still on the same battery after 11 years as a result and it's not used much.
  6. Yes, I looked at another similar company as well, but they wanted me to post them the headunit... I thought sod it, and waited half an hour at Skoda with a coffee and wifi !
  7. £183 was the cost at Skoda for anyone looking to do the same (March 24). I contacted an independent as well, who said I would need to leave the head unit with them for a couple of days !! No thanks.
  8. From memory back in 2021 when we put the final 2020 update on, you switch on the ignition and head unit, flick the little plastic tab down on the sd card (I think) then push into the sd card slot. Then wait while it whirrs away copying files. I think it took a couple of hours so best to do it in a garage or where you can keep an eye on it with the key in the ignition. You don't need to worry about charging the car battery unless it's showing signs of being on its last legs !
  9. We've just sold our 2015 Yeti with the same sat nav and the 2020 sd card was indeed the latest update. Part of the reason why we bought a newer Yeti with SmartLink as Google maps are always being updated.
  10. Not sure really but are the wheel arch liners and undertray fully intact ? I had a Subaru which was letting a lot of road noise in because the nearside liner was broken. Do you know a friendly local garage who can put in on a ramp to have a look? Our latest Yeti TDi has some wind 'rustle' from the drivers window above 60mph when the wind is in the wrong direction, but impossible to work out where it's letting the noise in...!
  11. Looks ok in a Volvo EX30 kind of way. Modern design language and all that.
  12. Is this complicated - new connectors, wiring etc , or is it unplug the old and plug in the new? I like the the front LED running lights on our latest Yeti, and the LED rear ones look much sharper.
  13. What was your technique ...?
  14. I'm not sure how you can get individual barbs out once in, without having to lever the black frame plastic to the point of breaking.
  15. Impossible without breaking either the black frame behind it or the slots that the silver tags for into.
  16. I did wonder when looking at it.
  17. Has anyone done this ? I can see that there are push pins underneath the bottom edge, but not sure where you start to ease the silver frame out of the backing ?
  18. Prezafab

    Adblue

    Thanks. We have a slopey drive and a hilly road, but will try what you suggest ! How much do you normally put in at 2/2500m to go ?
  19. Prezafab

    Adblue

    Reading the above - do I top up at 2500m and how much would it take ? Asking as Just got out latest Yeti. My Audi is really specific and you cannot top up as and when - exact amounts after a specific message etc. I think the Yeti is more laid-back , as usual !?
  20. Ok, number 8 collected (4x4 dsg diesel) and driven 5 hours home. 48mpg at 'pressing-on' speed. The rest is pure Yeti. It's not a posh Audi like the other household car, but it's still comfortable, enjoyable to drive and in some ways all the better for the lack of pretence about it. Good in unexpected puddles too !
  21. We're due to collect our eighth Yeti between us - the latest I could find for sale, from Dec 2017. My other half wasn't blown away by a used Karoq, and really didn't like the Kodiaq I had once. There are more and more people chasing fewer and fewer good, well-specced used Yetis. I almost got tempted by an L&K but that roof is the only real major flaw in the Yeti design (sometimes). If you have a good one, keep it. If you are looking, SEL Drive or SEL are fine.
  22. Well I've never had a DPF or EGR valve problem in all the years I've been using Miller's DPF cleaner and/or Millers diesel Powermax. Maybe you should email [email protected] and ask them ?
  23. ... Already have ! Black wrap it is then.
  24. We're getting another Yeti but my other half doesn't like the silver plastic 'bull bar effect" at the front, so I was thinking about a black vinyl wrap. Then I saw this chin trim which I've never seen before - can you buy this or was it a City trim option??
  25. Prezafab

    Car covers

    We've never covered any of our Yetis, but my experience of outdoors car covers is based around keeping an old Subaru Impreza Turbo dry and rust-free ! :- 1) Get the heaviest weight cover you can find (many eBay and Amazon ads will state this). 2) Cotton / fleece lined inside 3) Decent straps to the under the body and over the roof. 4) Put 2 covers on top of each other if covering without moving car for a few weeks. If you do all that, it won't lift or blow away, it won't scratch the paint, and the water won't soak through and sit on the paint !!!
×
×
  • Create New...

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.