defsix

Thanks for the inspiration 😁

I wanted to educate myself further on the Toolbox. Not looking for anything specific.

...

I'd see the GitHub before, I was looking for further details on each customization. And what each option does exactly.

Has anyone seen a guid to using the Toolbox with our vehicle's?

They're wrong. Filter is on the top, looks like a small engine oil filter.

Thanks, are you sure that chart is correct? There appears to be a part number difference between Saloon and Combi even though there are the same part numbers on the individual springs? In Saloon the 02 is for FWD, 03 for 4x4, 04 for DSG ? On the Combi 03 is FWD, 04 is 4x4, 02 is DSG. Assuming DSG is the last line Is the DSG box that much heavier?

I used this place to find the recommended. I also noticed E10-79-012-03 version. I wonder what the difference is?

Why do you think I have a slightly different part number? Estate / DCC / FWD 2.0 190BHP

I fitted EIBACH Pro-Kit E10-79-012-04-22 Suspension kit, coil springs and H&R 55573-15 (15mm) Wheel spacers all round. On Bridgestone Potenza S001 235/40R19. Never had any clearance issues.

Ever try Carista ?

You don't recall the post title? Tried a few searches but no results 😩

I've an intermittent fault with my 2020 FL Subwoofer. It the the connection on to the speaker itself or the plug that fails ?

Sunroof or Windscreen adhesive failed. Test with garden hose.

Tinted windows? OEM or aftermarket?

Yeah, i was playing with my seats too. Same result as you. I still think it's the motor that doesn't like being stopped at the extreme position. The controller maybe winding it back as a preventative measure.

I know what I'm looking for now! Thanks!

Yeah, I was surprised to see only one connection being used on the antenna. Cairus suggested an alternate place for the GSM one.

Thanks Cairus, I'll have look there.

Ok, New Antenna installed. A bit awkward to do. Boot seal removed, rear side trims and wedged down the Headliner. I did manage to break the clip that holds the headliner in the centre, but the boot rubber holds it in place. Here's the clips I broke. And the antenna. The antenna was full water. After removing the APEX connector which was very awkward, cleaned roof where it was mounted, there was quite a bit of oxidation. I wonder is the metal of the roof used as a ground plane? Cleaned the connector with Electric Switch Cleaner, the new Antenna was fitted loosely. I checked GPS on sat nab and was getting 7 to 9 of 10 Satellites. So proceeded to finish the job. Now after clearing the faults I am still getting the error on the GSM side. There was only one cable connected to the antenna, so assuming this was the GPS one. So where is the GSM Antenna located?

Let me know how you get on.

I'd read that before. Did you try it?

That doesn't happen in my case at all. Are you saving the profile to the key manually? Have you heard the ping when you save the position on the seat itself?

I never noticed the actual movement 🤔

Yup, I'm the same as you. Ass down all the way. I think the seat doesn't like being sat at the limit of it's position. It always works it's way back up a little.