Jump to content

What has been the single best modification you have done to your Superb?


Recommended Posts

No laugh - SWMBO likes to sit in the back with her shoes off. She says it makes her feel all ?!?!?!?!?!?!

Haha. The joke's on us you salty old sea dog! Never thought of that. Wink, wink etc. Say no more my goodman!

  • Like 2
Link to comment
Share on other sites

Haha. The joke's on us you salty old sea dog! Never thought of that. Wink, wink etc. Say no more my goodman!

A nods as good as a wink to a blind bat..............etc

  • Like 1
Link to comment
Share on other sites

I was torn between the pioneer ts-wx610A to go in the spare wheel, and the 710a which would've laid across the boot. The 610 is a completely invisible install, and doesn't sacrifice any space in that tiny tiny boot. Important that it's amplified.

Edited by JakeBlade
Link to comment
Share on other sites

Think that only works for 1.8 petrol engine, certainly doesn't work for 2.0 CR140 CFFB engine (I tried it).

DOH!!!!!!!

Would have liked this info on the maxidot. one of the few things I'll miss from the V70 as this is how the cruise works in that.

Cheers

Dave.

Link to comment
Share on other sites

Might have done something wrong, but when I tried this it didn't work, do I have to do something in the MFD set up ?

MY11 1.8 TSI Combi SE+

Is your instrument cluster having SW version 0406 as stated above as prereq. ?
Link to comment
Share on other sites

How/where do I find that out ?

I think it is listed in VCDS under "instruments"..... mine says "H20 0420" so I'm wondering if mine is software version 0420.

Cheers

Dave.

Link to comment
Share on other sites

What is the part number of your ABS pump you have ?

Out of interest in VCDS my ABS shows as part number 1K0 907 379 BE. Would I be able to enable hill hold on my car???

Cheers

Dave.

Link to comment
Share on other sites

Out of interest in VCDS my ABS shows as part number 1K0 907 379 BE. Would I be able to enable hill hold on my car???

 

 

 

1K0-907-37?-AD ; MK60EC1 (PR-1AT, UG0/UG3)

1K0-907-37?-AE ; MK60EC1 (PR-1AT, UG1/UG4)

1K0-907-37?-AF ; MK70M (PR-1AC)

1K0-907-37?-AH ; MK60EC1 (PR-1AT)

1K0-907-37?-AJ ; MK60EC1 (PR-1AT, UG1/UG4)

1K0-907-37?-AK ; MK70M (PR-1AC)

1K0-907-37?-AM ; MK60EC1 (PR-1AT)

1K0-907-37?-AN ; MK60EC1 (PR-1AT, UG0/UG3)

1K0-907-37?-AP ; MK60EC1 (PR-1AT, UG1/UG4)

1K0-907-37?-AQ ; MK70M (PR-1AC)

1K0-907-37?-AS ; MK60EC1 (PR-1AT)

1K0-907-37?-AT ; MK60EC1 (PR-1AT, UG1/UG4)

1K0-907-37?-BA ; MK60EC1 (PR-1AT)

1K0-907-37?-BB ; MK60EC1 (PR-1AT)

1K0-907-37?-BC ; MK60EC1 (PR-1AT, UG1/UG4)

1K0-907-37?-BD ; MK60EC1 (PR-1AT, UG0/UG3)

1K0-907-37?-BE ; MK60EC1 (PR-1AT, UG1/UG4)

1K0-907-37?-BF ; MK60EC1 (PR-1AT)

1K0-907-37?-BG ; MK60EC1 (PR-1AT, UG1/UG4)

1K0-907-37?-BH ; MK60EC1 (PR-1AT, UG0/UG3)

1K0-907-37?-BJ ; MK60EC1 (PR-1AT, UG1/UG4)

1K0-907-37?-BK ; MK60EC1 (PR-1AT, UG0/UG3)

1K0-907-37?-BL ; MK60EC1 (PR-1AT, UG1/UG4

 

 

PR-1AT = Electronic Stabilisation Problem (ESP)

PR-UG0 = Hill Hold Control (HHC) OR Comfort Driving Assist NOT installed

PR-UG1 = Hill Hold Control (HHC) installed

PR-UG3 = Comfort Driving Assist installed = XDS

PR-UG4 = Hill Hold Control (HHC) & Comfort Driving Assist installed

 

Yep, HHC and XDS can both be enabled on your car.

Edited by Too Tall
  • Like 1
Link to comment
Share on other sites

Nice one..... So that's something else i need to ask someone to enable for me at the next meet someone has VCDS at. :)

At least if the cruise control display thing doesn't work on my car the HHC and XDS should. :)

Cheers

Dave.

Link to comment
Share on other sites

I'm in the process of swapping clusters - the new one I'm fitting has SW 0608 (SW 0406 is the required level), so I don't know if the CC display thing will work. Will post when I get around to it!

  • Like 1
Link to comment
Share on other sites

I'm in the process of swapping clusters - the new one I'm fitting has SW 0608 (SW 0406 is the required level), so I don't know if the CC display thing will work. Will post when I get around to it!

So am i right in thinking what I posted earlier about what I found in my VCDS scan is indeed the software version?

Cheers

Dave.

Link to comment
Share on other sites

Think that only works for 1.8 petrol engine, certainly doesn't work for 2.0 CR140 CFFB engine (I tried it).

I already tried this a few years ago, but it doesn't work on my 1.8 TSI either. In VCDS I read:

Address 17: Instruments (J285)       Labels: 5K0-920-xxx-17.clb

   Part No SW: 3T1 920 841 J    HW: 3T1 920 841 J

   Component: KOMBI         H04 0607

So it seams I have SW version 0607... :'(

Edited by andrehj
Link to comment
Share on other sites

So my ABS module P/N is 1K0 907 379 BD, which equates to PR-1AT, UG0/UG3, meaning I don't have HHC, but do have XDS, is that correct ?

Although when I click on adaption, XDS comes up as ERROR, channel 36 not available ?

Also my instruments software is H20 0420, so I can't have the CC speed displayed on the MFD

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Community Partner

×
×
  • Create New...

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.