Actually busy on the sound proofing now

It actually works fine

 

Works fine actually . The doors dont sound like a tin can anymore . There like audi doors . They sound solid ^^

Just have do drive around to test it

Audio should be beter to

How easy are the door cards to get off?

 

 

Edited 20 April, 20179 yr by S27VEJ

37 minutes ago, S27VEJ said:

How easy are the door cards to get off?

 

 

2 bolts underneath .

2 bolts under the door handle

And pull the doorcard off and up

Beware for cables from mirrors tweeter 

Doormech.

Speaker

Super easy really 

Great stuff. 

 

Might have a go at the weekend 

Okay . So today my maxton splitter arrived.

So i took off the bumper. 

Easy peasy

Took out the 2 grille's for painting

And cleaned the bumper inside out .

Because of the previous owner theres speedbump rash on the under and frontside of the bumper . So that will be sorted and repainted 

Grille and honeycomb-

gloss black paint DIY

DRL polish

And splitter install

Also gonna replace the 2 torx screws on the inside wheel arch with hex nuts for easy'r on and off .. will be beter to fit in a allan key and loosen or tighten them.

The torx always pops out .

Anyway it makes me nervous A F 

 

 

2 hours ago, Enslave666 said:

2 bolts underneath .

2 bolts under the door handle

And pull the doorcard off and up

Beware for cables from mirrors tweeter 

Doormech.

Speaker

Super easy really 

Nice!! I have a creek from the passenger inside handle. Needs tightening up I think. 

 

Great write up on all this mate.

So this happened 

Primer 

And in a few moments gloss black .

Will try my best .with 5 tin coats . Should be nice ... lets hope

5 minutes ago, Enslave666 said:

This is 2 layers

Old pic off me ant minty <3

♡loved it

Oh boy ime super excited about the front bumper now . Its perfect now and the splitter wont go anywhere

Looking mean

Monday the smoked lights will be in . 

Then my car is only green and black.

O yeah and the rash on the bumper is fixed with a can off specialist made paint. Its really spot on the color

At skoda a can of spray paint is 50euros

At goveare that the specialist paint shop

18 euros . 

Love the splitter, I wanted one for mine but could never find one local

3 hours ago, hutchysrs50 said:

Love the splitter, I wanted one for mine but could never find one local

Maxton design have a local website 

Found out that the bumper has plastic brackets for headlamp sprayer

As my car doesnt have a headlamp spray unit ive removed them .

Have to sort the vrs badge with some 2 component glue . Normal plastic glue doesnt to the job ...

And done ^^ superhappy how it came up. 

Easy job with much joy after. 

 

Looking good mate

 

 

Supercharger cover removal . 

Now I'm jealous! You had the brackets to fit headlight washers and you removed them!

 

Perfect time to just fit headlight washers instead

 

10 hours ago, hutchysrs50 said:

Now I'm jealous! You had the brackets to fit headlight washers and you removed them!

 

Perfect time to just fit headlight washers instead

 

No the bumper does not have the holes for headlamp washers . Why would i install those anyway ? I dont want the car to get heavyer . And i dont see the point of the washing system...

Do u want those brackets hutchysrs?

Valid points I suppose. I'm just a sucker for optional extras and gadgets.

 

I do want them yes but after seeing this post I checked online and buy them them for around £10 each so will just get them new when I need them  thanks though

 

Yes they are HERE 

Install this afternoon

They just need a little polish

Here installed . So they are red smoked . 

which side is reverse light on I'm sure in uk mine is on the left. Yours is on the right? Might be wrong, defo my next mod

4 hours ago, Enslave666 said:

Here installed . So they are red smoked . 

coming together nicely mate, making me want to make a project thread for all the mods i have on at the moment