Amundsen MIB2 Firmware Update

[varooom]

4 minutes ago, manu73 said:

it gives me an error

Can you please translate for me

[manu73]

 

software update
error no data available.
enter a source with data to update the software or check the source

[varooom]

Just now, manu73 said:

 

software update
error no data available.
enter a source with data to update the software or check the source

Can you take a picture of the file structure of the SD Card?

[manu73]

[varooom]

1 minute ago, manu73 said:

They are in the correct places (root)

It's formatted as FAT32 hopefully on SD Card

 

Was you in the screen with Software Train for the update?

 

If this fails, then maybe you need to borrow a PC to extract file's.

[manu73]

I tried with sd card and pendrive and it doesn't detect anything, any solution?

[gerstemann]

1 minute ago, manu73 said:

I tried with sd card and pendrive and it doesn't detect anything, any solution?

Is the format FAT32. Maybe the SD Card is too lage, try a 8GB one.

[langers2k]

40 minutes ago, manu73 said:

I tried with sd card and pendrive and it doesn't detect anything, any solution?

 

Use a windows computer or some of the many 'clean my drive' style apps that exist on macOS..

[varooom]

On 17/10/2022 at 10:21, manu73 said:

Checking also you are using this screen to perform the update?

 

Next is for you to use a Windows PC (friend or family)

[manu73]

I have done it with Windows PC and nothing does not detect pendribe??

[varooom]

15 minutes ago, manu73 said:

I have done it with Windows PC and nothing does not detect pendribe??

USB I have never found anyone who has made it work with MIB1 to MIB2.5

Try once more with SD Card, and you should get it to work.

[manu73]

of 32gb??

[varooom]

4 minutes ago, manu73 said:

of 32gb??

At least 4GB (as far as I remember)

 

So 4, 8, 16 or 32GB will be fine.

[manu73]

send me download link boi try last time

[Pitu]

Hi, could anyone tell me if there is an update available for this? And can i install and run maps on my Navigation?

[varooom]

2 hours ago, manu73 said:

send me download link boi try last time

Sent another link

 

 

2 hours ago, Pitu said:

Hi, could anyone tell me if there is an update available for this? And can i install and run maps on my Navigation?

You should press and hold down your menu/setup button for about 10 seconds or less to enter the engineering menu with the Software Train value in.

Also take a picture of the front of the screen with buttons, if you don't have a NAV key, then odds are no you cannot load maps.

[Pitu]

I have NAV key

[varooom]

1 minute ago, Pitu said:

I have NAV key

Very good, you can update firmware to 0253

 

As for maps, you may need it activated, but you will need to get a Skoda map card as they have an ID embedded that the car has to read, or it will not allow maps to load.  You can pickup these cards on market websites for not too much money.

[manu73]

I didn't get a link

[varooom]

7 minutes ago, manu73 said:

I didn't get a link

You did, it's still in your private messages from 2 hours ago, unread.

[ScleptzeR]

I updated the firmware and now the nav is not working..I have the original sd card but the nav won`t start

[ScleptzeR]

I updated from 241 to 253

[varooom]

8 minutes ago, ScleptzeR said:

I updated the firmware and now the nav is not working..I have the original sd card but the nav won`t start

You should post or translate exactly what you see on the screen when you try to load navigation.

[ScleptzeR]

[varooom]

6 minutes ago, ScleptzeR said:

Might be wise to format and download a copy of the maps again.

 

Did you update firmware with map card in the car?