Peeky thaks for all things 

Can you help me on skoda karoq 2021 if any code to active navigation on mib3 and thanks

Peekey34 

Thanks for your help 

But are this codes work on karoq 2021?

Itry many not accpet coding 

Great help peekay 

But I have karoq 2021 

Ans vcds he didn't accept 31347

on it rofucd it 

any help on that i got last version on vcds too

@rawy vcds should offer you the security code. Make sure you have installed correctly the SW, I had the same issue in the past with my vcds and it turned out that in the installation process I've forgot to check a box(install 32bit driver or something like that). Once I did that, all of my issues were gone.

Hi everyone.  Can someone help me with "Rain Close sunroof and windows" coding?

On 09/07/2021 at 15:34, peekay34 said:

Ambient Lighting 30 Colours

 

In VCDS go to module 9

Security Code 31347

The colors are given in RGB coding

 

RGB is the acronym for Red-Green-Blue. Colors are made up of 3 parameters, with values in a range between 0 and 255.
Each color is encoded with a percentage of (Red, Green, Blue).
For example, a pure yellow can be defined as rgb (255, 255, 0).

 

I have attache an example of the colours I have set but you can use this as guide for more colours

 

RGB Color Codes Chart (calculatorx.com)

 

Changes can be started use lines in attached doco from 11-30 to add colours to existing 10 already enabled.

 

Rotwert Farbe  = Red

Gruenwert Farbe - Green

Blautwert Farbe = Blue

ambientLIGHTINGCODEING.docx

Does this work on FL too?

On 12/07/2021 at 10:23, peekay34 said:

I have the Alcantra Seats in my Sportline. For some unknown reason that I can't work out Skoda does not supply the mirror that does not mirror dip. They only included that option with the lessor model with leather memory seats (so I am told.)  My car is the top of the range with all options (lane assist read radar) available in Australia but still no mirror dip. I did some research and found that the mirror with memory function is missing from my car. So I ordered the mirror with memory function simply replaced the  mirror and recoded and it worked.   Since I dont know what model  you have I can only advise mirror assembly I purchased. 57C857507K pretty sure thats the part no.  https://www.oemvwshop.com/57c857507k-rear-view-mirror-housing-p2335210/

What's the part number for left hand drive cars for the right dipping mirror?

So, to revive the topic: has anyone done VCDS coding on their Karoq and did it work?

I have:

GREEN score tracking

Offroad menu

Rear lights during daytime running lights

Power steering stiffness (harder)

Locking the car when starting

Compass display

Oil temperature on OBD

Closing windows against rain - not possible, in group 09-->07 there are only codes 0000000000 - coding here is not possible.

The menu shows Wiper mounting position - not possible

19 minutes ago, noxik600 said:

So, to revive the topic: has anyone done VCDS coding on their Karoq and did it work?

I have:

GREEN score tracking

Offroad menu

Rear lights during daytime running lights

Power steering stiffness (harder)

Locking the car when starting

Compass display

Oil temperature on OBD

Closing windows against rain - not possible, in group 09-->07 there are only codes 0000000000 - coding here is not possible.

The menu shows Wiper mounting position - not possible

Which year is Your Karoq? May I code the off-road menu on my 22 FL?

Hello. VCDS coding – locking after leaving the vehicle – successful. But when I walk to the rear doors, they lock. Can this be set to, for example, 3 meters from the ignition switch?

On 14/02/2026 at 21:36, Benja77 said:

Which year is Your Karoq? May I code the off-road menu on my 22 FL?

Before making any changes, note down the original values.

Incorrect coding can adversely affect the function of the control unit; you are responsible for this. If the off-road menu does not appear on the radio after coding, restart the radio by holding down the power button until the radio restarts. It works for me:

5F - Electrical info »

[ Security access - 16 ] »

S12345 »

[ Adaptations - 10 ] »

ENG122229-ENG117732-Car_Function_List_BAP_Gen2-compass_0x15 » New value "Activated"

ENG122227-ENG117566-Car_Function_Adaptations_Gen2-menu_display_compass » New value "Activated"

ENG122227-ENG117568-Car_Function_Adaptations_Gen2-menu_display_compass_over_threshold_high » New value "Activated"

4 hours ago, noxik600 said:

Before making any changes, note down the original values.

Incorrect coding can adversely affect the function of the control unit; you are responsible for this. If the off-road menu does not appear on the radio after coding, restart the radio by holding down the power button until the radio restarts. It works for me:

5F - Electrical info »

[ Security access - 16 ] »

S12345 »

[ Adaptations - 10 ] »

ENG122229-ENG117732-Car_Function_List_BAP_Gen2-compass_0x15 » New value "Activated"

ENG122227-ENG117566-Car_Function_Adaptations_Gen2-menu_display_compass » New value "Activated"

ENG122227-ENG117568-Car_Function_Adaptations_Gen2-menu_display_compass_over_threshold_high » New value "Activated"

Do You suggest to write down original coding so I can return to it in case the new doesn’t work/restore it? You coded this menu via VCDS? Which voices can You visualize? Can You post an image of the Off-road Menu?

Edited 23 February23 Feb by Benja77

Hi new to the Koraq an I’m wondering if o can code out kessy ? I believe that’s what it’s called basically when I turn off my car and get out I close the door and all the doors lock automatically and I’m worried I will leave the keys in the car one day and get locked out

On 23. 2. 2026 at 18:04, noxik600 said:

Před provedením jakýchkoli změn si poznamenejte původní hodnoty.

Nesprávné kódování může nepříznivě ovlivnit funkci řídicí jednotky; za to nesete odpovědnost. Pokud se po kódování na rádiu neobjeví menu Off-Road, restartujte rádio podržením tlačítka napájení, dokud se rádio nerestartuje. U mě to funguje:

5F - Elektroinformace »

[ Bezpečnostní přístup - 16 ] »

S12345 »

[ Adaptace - 10 ] »

ENG122229-ENG117732-Car_Function_List_BAP_Gen2-compass_0x15 » Nová hodnota „Aktivováno“

ENG122227-ENG117566-Car_Function_Adaptations_Gen2-menu_display_compass » Nová hodnota „Aktivováno“

ENG122227-ENG117568-Car_Function_Adaptations_Gen2-menu_display_compass_over_threshold_high » Nová hodnota „Aktivováno“

Anwendungen » [Kanalzuordnung] » Ziel- und Sicherheitszugriff –

Gesamtes Fahrzeug (nur CAN) // Um nur eine bestimmte Einheit zu sichern, wählen Sie „Steuergeräteadresse“ und geben Sie deren Nummer ein, z. B. 5F – Elektrische Informationen//

Funktion – Anpassung

Ausgabe – Roh-Hexadezimal

Nur das Hexadezimalformat kann zur Wiederherstellung verwendet werden.

On 14. 3. 2026 at 19:05, chadders_86 said:

Ahoj, jsem nový v Koraqu a zajímalo by mě, jestli můžu odemknout Kessy? Myslím, že se to tak jmenuje. V podstatě když vypnu auto a vystoupím, zavřu dveře a všechny se automaticky zamknou. Bojím se, že jednou nechám klíče v autě a zamknu se venku.

Hello, with KESSY – the keyless entry system – you can unlock your car at any time using the door handle after locking it. ANYONE can unlock the door. It's better to keep the key in your pocket and never take it out.

Edited 15 March15 Mar by noxik600

2 hours ago, noxik600 said:

Anwendungen » [Kanalzuordnung] » Ziel- und Sicherheitszugriff –

Gesamtes Fahrzeug (nur CAN) // Um nur eine bestimmte Einheit zu sichern, wählen Sie „Steuergeräteadresse“ und geben Sie deren Nummer ein, z. B. 5F – Elektrische Informationen//

Funktion – Anpassung

Ausgabe – Roh-Hexadezimal

Nur das Hexadezimalformat kann zur Wiederherstellung verwendet werden.

Can You please write in English?

3 minutes ago, Benja77 said:

Můžete prosím psát anglicky?

Sure, I'm like a translator 😄

Applications » [ Channel Assignment] » Target Access and Security –
Whole Vehicle (CAN Only) // To back up only a specific unit, select "ECU Address" and enter its number, e.g. 5F – Electrical Information //
Function – Assignment
Recovery – Raw Hexadecimal Format
Only Hexadecimal format can be used for recovery.