Jump to content
READ ME - iOS Notifications - How To Enable - Guide

Possible VCDS tweaks in skoda fabia mkii 5j?

Vigneshwaran
 Share

Recommended Posts

Vigneshwaran Contributor

Vigneshwaran

Posted
Posted

Recently I bough a VAG-COM-HEX-V2 interface and was getting to know the VCDS. Though I bough the VAG-COM mainly for diagnosing any issues, I was curious if I can use it enable the stuffs like remote key window rolling up down and needle sweep. 

Only problem is (at least what I think) is mine is a pretty old model(2010) which doest support long coding as VCDS doesn't show long coding helper as most of the forum post instructs us to work with long coding I wonder if this is possible at all.

Things which I am planning to do are:

1- Convenience remote control window up and down.

2 - Needle sweep / Celebration when we turn on the ignition.

 

Any other mods which will be fun is really appreciated:

 

Posting my VCDS scan details which contains all the module versions which can be useful if someone tries to help me. Thanks in advance.

  

Chassis Type: 5J (5J - Skoda Fabia (2007 > 2010))
Scan: 01 02 03 08 09 15 16 17 19 25 37 44 46 55 56 76 77
 
VIN: TMBBHH5XXXXXXXXXX   Mileage: 72610km-45117miles
-------------------------------------------------------------------------------
Address 01: Engine        Labels: 03E-906-033-AZQ.lbl
   Part No: 03E 906 023 N
   Component: SIMOS91 1.2l 4V     3515  
   Revision: --H04---    Serial number: SKZ7Z0I5402287
   Coding: 0000071
   Shop #: WSC 01234 785 00200
   VCID: 2A5BB7AF86FFC0D47D-515A

1 Fault Found:
16955 - Brake Switch (F)
            P0571 - 008 - Implausible Signal - Intermittent
Readiness: 0010 0001

-------------------------------------------------------------------------------
Address 03: ABS Brakes        Labels: 6R0-907-37x-ABS80.clb
   Part No SW: 6R0 907 379 J    HW: 6R0 907 379 J
   Component: ABS 8.0 front   H06 0003  
   Revision: 00000000    Serial number: 00000000000000
   Coding: 0002100
   Shop #: WSC 01234 785 00200
   VCID: 4581E4130FA10FAC70-515A

3 Faults Found:
00526 - Brake Light Switch (F)
            011 - Open Circuit
01314 - Engine Control Module
            004 - No Signal/Communication - Intermittent
18055 - Check Coding of ECUs on Powertrain Data Bus
            P1647 - 000 -  - Intermittent

-------------------------------------------------------------------------------
Address 08: Auto HVAC        Labels: None
   Part No: 5JF 820 045 C
   Component: Klimaanlage         00.9  
   VCID: 3B7582EB2965495C16-513C

No fault code found.

-------------------------------------------------------------------------------
Address 09: Cent. Elect.        Labels:. 6Qx-937-049-C.lbl
   Part No: 6Q1 937 049 F
   Component: 0000 BN-SG.         2S36  
   Coding: 25742
   Shop #: WSC 01234  
   VCID: 3E738BFF3A775C7431-515A

2 Faults Found:
01314 - Engine Control Module
            49-10 - No Communications - Intermittent
01304 - Radio
            49-00 - No Communications

-------------------------------------------------------------------------------
Address 15: Airbags        Labels: 6Q0-909-605-VW5.lbl
   Part No: 1C0 909 605 K
   Component: S1 AIRBAG VW51      0011  
   Coding: 21297
   Shop #: WSC 01234  
   VCID: 2C57B1B7DC0BDEE48F-515A

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments        Labels: 5J0-920-xxx-17.clb
   Part No: 5J0 920 801 B
   Component: KOMBIINSTR.    V2802476  
   Coding: 16103
   Shop #: WSC 10039  
   VCID: 25414493BFE1EFAC50-515A

1 Fault Found:
01314 - Engine Control Module
            49-10 - No Communications - Intermittent

-------------------------------------------------------------------------------
Address 19: CAN Gateway        Labels: 6N0-909-901-19.lbl
   Part No: 6N0 909 901
   Component: 000J GATEWAY CAN    2S36  
   Coding: 00014
   Shop #: WSC 01234  
   VCID: 70EF65C730A3FA04F3-513C

2 Faults Found:
01314 - Engine Control Module
            49-10 - No Communications - Intermittent
01304 - Radio
            49-00 - No Communications

-------------------------------------------------------------------------------
Address 25: Immobilizer        Labels: 5J0-920-xxx-25.clb
   Part No: 5J0 920 801 B
   Component: IMMOBILIZER    V2802476  
   Coding: 16103
   Shop #: WSC 10039  
   VCID: 25414493BFE1EFAC50-515A
   TMBBHH5XXXXXXXXXX     SKZ7Z0I5402287

No fault code found.

-------------------------------------------------------------------------------
Address 44: Steering Assist        Labels: 6Q0-423-156.clb
   Part No: 6R0 423 156
   Component: LenkhilfeTRW        V272  
   Coding: 10140
   Shop #: WSC 01234  
   VCID: 6DD17CB3279117ECD8-515A

1 Fault Found:
01314 - Engine Control Module
            49-10 - No Communications - Intermittent

-------------------------------------------------------------------------------
Address 46: Central Conv.        Labels:. 6Q0-959-433.clb
   Part No: 5J0 959 433 A
   Component: 06 Komfortgerát     0001  
   Coding: 00019
   Shop #: WSC 01234  
   VCID: 3169A0C3FB29B30CBC-4B18

No fault code found.

End-------------------------(Elapsed Time: 03:41)--------------------------

 

 

 

Link to comment
Share on other sites
26DIPP Proficient

26DIPP

Posted
Posted

Ours is 2009, i.e. pre face lift. You do not have that many coding options. Some are the old fashioned version of calculating and adding specific values.

 

I do not think I coded needle sweep.

 

The locking is called Auto lock. I think you can set that in the Maxidot....

  • Thanks 1
Link to comment
Share on other sites
sepulchrave Mentor

sepulchrave

Posted
Posted

I use a dustpan and brush to sweep the needles that fall off the tree at Christmas, I have no idea why you'd want to try and program a ten year old car to do it for you.

 

You must have a lot of time on your hands.

  • Haha 1
Link to comment
Share on other sites
mrgf Experienced

mrgf

Posted
Posted

You can get the stereo display to show MPH, if you fancy it! I only found out some while ago and would have had it done from the dealer if I had known!

Link to comment
Share on other sites
26DIPP Proficient

26DIPP

Posted
Posted
2 hours ago, mrgf said:

You can get the stereo display to show MPH, if you fancy it! I only found out some while ago and would have had it done from the dealer if I had known!

Are you saying you get a large MPH readout in the Maxidot? What is the coding and what year is yours?

Link to comment
Share on other sites
UrbanPanzer Experienced

UrbanPanzer

Posted
Posted (edited)

yes you can get a large MPH on the maxidot.

 

You have to set the vehicle to "rest of world" spec with VCDS or similar and turn off ALT speed disp in maxidot settings.

 

You then have the option for a digi speedo

Edited by UrbanPanzer
  • Like 1
Link to comment
Share on other sites
mrgf Experienced

mrgf

Posted
Posted

I was referring to the stereo or at least, the dance unit. Apparently, the display can have MPH enabled, for driving instructors, etc.

Link to comment
Share on other sites
Vigneshwaran Contributor

Vigneshwaran

Posted
  • Author
Posted
11 hours ago, UrbanPanzer said:

yes you can get a large MPH on the maxidot.

 

You have to set the vehicle to "rest of world" spec with VCDS or similar and turn off ALT speed disp in maxidot settings.

 

You then have the option for a digi speedo

Unfortunately I dont have maxidot in console, Mine is older and have predesigned lcd in the center console. 

 

Link to comment
Share on other sites
Vigneshwaran Contributor

Vigneshwaran

Posted
  • Author
Posted

Update :

I guess the 5J platform Fabia have old control units and doesn't even have long coding support  and VCDS doesn't have much info on the bytes and their info.

I was able to do some of the below things.

1- Increase the steering assist from normal to higher level in low speeds

2- Increase the number of convenient turn indicator blinks to 3 blinks to 5.

Link to comment
Share on other sites
  • 7 months later...
zrock1 Apprentice

zrock1

Posted
Posted

Can you please share the coding for the above ?

 

I was able to do some of the below things.

1- Increase the steering assist from normal to higher level in low speeds

2- Increase the number of convenient turn indicator blinks to 3 blinks to 5.

Link to comment
Share on other sites
Meridion Enthusiast

Meridion

Posted
Posted
On 26/04/2021 at 18:51, UrbanPanzer said:

yes you can get a large MPH on the maxidot.

 

You have to set the vehicle to "rest of world" spec with VCDS or similar and turn off ALT speed disp in maxidot settings.

 

You then have the option for a digi speedo

Wish I'd know this, that would be sweet!

Link to comment
Share on other sites
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Community Partner

×
×
  • Create New...

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.