On 30/04/2024 at 19:35, aaaaplay said:

 

I've had a look through the Skoda file list on VAG Flashinfo and identified these two files:
 

• 5FMIB3OISW278RDW.zip 30.06.2022
• 5FMIB3OISW278SOP1RDW.zip 

But I can't find them anywhere online. I checked Erwin for a relevant TPI and the only document referring to software updates is for version SW324 and the TPI presumes the oldest version is 270 which doesn't help me stuck on 156.

 

To make things worse the RW 308 software file hosted on MIBSolution is corrupt.

 

 

This is really frustrating!

 

I have still had zero luck trying to find the rest of the world copies of these files. No one seems to be able to help me.

Worse still my local Skoda dealers diagnostic systems are off line for 8 weeks or more - even if they were willing to help me.

New Firmware for MIB3 Version 0332

Https://disk.yandex.ru/d/p21TSZ9mKJcTVQ

8 hours ago, User_ said:

New Firmware for MIB3 Version 0332

Https://disk.yandex.ru/d/p21TSZ9mKJcTVQ

Thanks, have you installed it?

In mibsolution.one  too.

As I still have a 3-year warranty, I haven't installed the software as I don't want to lose the warranty

No news, let´s try.

Edited 15 February, 20251 yr by vegarz

Works well but see no changes in the system. But always nice to have the latest software on the radio.
Thanks for the files.

Radio database downgraded to 1.31.44, update again to 48b and after this to 50.

Curiosity no loose update 50 new radio logos.

Curiously 

Thank you everyone for the tutorials and clarifications on how to update MIB. After getting some confidence as a newbie in this I would like to double-check some information just to be sure and not to brick the system. So if anyone can support me I would be thankful.

I have Karoq 2020 with moi3_eu_skmqb_p27000p.

1. According to the release train, I should go 270->308->330. Is this the proper way, as some people suggest going to 306 first (and with that 278)?

2. Do I need to update OCU as well? I guess I am already on the latter one since I have 270 (waiting for obd11 to arrive to read), if not, which is the lowest OCU allowed for this (I would be afraid to do this on my own).

3. As I do not have power cables, can I turn the engine on, disable the start/stop system, and leave it running while the update is working, or is it necessary to have only the ignition on?

4. Will updating to 330 remove my existing Care Connect package subscription?

Any other further advice would be appreciated.

Thanks upfront for the help.

Edited 5 March, 20251 yr by eyeofsauron

Hi eyeofsauron, I can tell you based on my experience after reading the many tips on this forum.. I have a Kamiq with MIB3 updated to version 306 and with OCU dated to version 035. I first updated the MIB3 to version 308 and then to version 330. I left the car with the engine running and I had no problems. After the update on the shop I still see the subscriptions I had purchased. Now I have a doubt about whether to update the OCU as it says that from version 035 I have to update to 088 and then move on to the subsequent ones, but I can't find where to download the 088...

Hello,

I have a Superb iV from 2021 and updated my MIB3 from 0270 -> 0308 -> 0330.

But i have problems to lockand unlock my Car via App.

Finally I realised, that my OCU (5WA035284B) is still running on Version 0035.

Unfortunately I can't find a Source for the Files for Version 0088 and 0148 - can somebody please help me out?

I would love to send a PM to @Rainesh but unfortunately I'm too new to this Board to send PMs.

PS: Is there also a Possibility to get the Codes from the Excel File for Predictive Navigation as mentioned in the TPI-2060553-8.pdf

Thanks from Germany in advance

you can try this

https://www.drive2.ru/l/695694817950177190/

Edited 26 March, 20251 yr by vegarz
mistake

Thanks for the link, but I'm to stupid to find the OCU files for Version 0088 qnd 0148 on the russian website.

Perhaps here can help to you

https://www.motorcarsoft.com/viewtopic.php?t=24815

Try to search

FL_5WA035284_0088_PART1_V001_S.frf

FL_5WA035284_0088_PART2_V001_S.frf

Hi guys! I am new to the forum. This thread is very informative. Thank you!

My software version is MEI3G2_EUSKMQB_P1910J.

Unfortunately, I can't find it on MIB-Helper and can't see if there are any updates.

Could you point me where to look?

P.S. The automated update in the menu says "No updates". The current version build is from July 2024.

On 17/02/2024 at 19:26, r0bb10 said:

So a little update: EVERYTHING WORKS.

 

Let's start a "Journey Diary - Guide" so that everyone that wants to do it can follow the steps and update. First of all, the previously mega link posted above (here) contains all the files needed. I did everything myself with the help of @Lennart, not diffucult at all, but the responsability is yours alone.

 

Updating from the ancient 0156 is not that difficult, it's just like any other update for the MIB3, but it breaks Navigation System. This is intentional and it's because Skoda changed the license and offers Navigation as a SWaP now. You can check in the Service Menu (long press menu button) that no 00071C00 FEC is installed and in the supported FECs it doesn't even show up as available to install.

 

According to the 2 TPI in the mega folder (one older in English, one recent 2024 in Italian) Navigation is now a SWaP, and since it already was included in the car package when bought you can reactivate it using the codes that Skoda provides to re-enable it.

 

Tool necessary to do the update is any OBDEleven or VCDS or any other tool that can do SVM (Software Version Management), but to re-enable Navigation ODIS-S is needed. ODIS-S is a dealer level software, so you have to rely on a dealer to apply the SWaP or to someone that has ODIS with a valid Geko Online account and the necessary hardware to connect to the car. Just go to the dealer after all the updates, you can bring the activation code or ask them to provide it, is in their ODIS Service Net and can be also obtained from Erwin Portal online.

 

In the first TPI it's stated that the OCU (Online Connectivity Unit) has to be flashed first. Before doing that use any of the tool to go to the 0075 module (the OCU indeed) and in adaptation you need to change the Crash Signal to "via CAN". Once applied format an usb stick to fat32 or exfat and unpack the version 143 of the OCU update named 5WA035284OCU143.zip in that stick. Insert the usb stick in one of the usb-c port and long press the Menu button for 3-5 sec, reboot in Engineering mode to start the update following the TPI instruction.

Once applied it will reboot and the infotainment will be working as usual. Using OBDEleven or VCDS or ODIS-S you will see that you have a fault error B201A, it's normal when doing an update via usb without dealership computer, it can be easily fixed by updating SVM using a xor tool that can be found here. It's nothing critical, you just have to tell the MIB3 that the software is new.

 

Now you can proceed to do the actual MIB3 Update: format the usb stick unpack the first sequential package MOI3_EU_SKMQB_R23802P + P26810P + P27800P.7z in the root folder, go in the Service Menu and then press Update. The software will auto check the usb drive and since everythin is signed by Skoda it only applies if the file is the correct. It is almost an 1h job and it will reboot multiple times (5-6 at least), since it's not incremental everytime it has to delete the previous and reflash.

 

After this you will land on SW version 278, MIB3 will work fine except that Navigation wont start. If you go in the Service Menu you will see that the Predictive Navigation FEC 00071C00 is not installed but it will be present in the available tab that was not present before. You can do a SVM fix again.

 

Re-do everything, format the usb stick and unpack MOI3_EU_SKMQB_P30600P_0306.zip, apply again in the Service Menu and wait for it, will probably need 20-25 min. On reboot, do the same with version MOI3_EU_SKMQB_P30800P_0308.zip than you can find here a then again with MOI3_EU_SKMQB_P33000P_0330.zip that will bring you to the latest 0330 version that was released i think Jannuary 2024. Remember that after each upgrade you have to confirm the installation change.

 

Once done you can finally check if everything is working except of the Navigation System.

 

To fix this you have to enable FEC 00071C00, and as said it can be only done by adding your specific activation license code and unlock pin (that work only in your car and vin) and only using ODIS-S Online, so if you go to a dealership to activate it he surely can and already has your data to do so, else just bring the code with you and let them restore it. It can be found in the excel sheet in the mega folder, just search for your vin and you will find it.

 

If you have the necessary tool to use ODIS-S yourself (like i did), connect to your car and perform a FFS (Function Activation), proceed with option 1, enter the 3 values when asked and apply them, it will ask you to login online using Geko (DSS Login) and let ODIS-S check with the servers if the codes entered are valid, after a 20sec wait or so it will be verified and unlocked. Now Navigation will start again! You can check in the Activated FEC and you will see that 00071C00 is enabled and valid.

 

This is not a hack, it's not some sort of dark magic, is just exactly what the dealer does when they perform an update. Since they often wont do it (if aint broke dont fix it) or refuse because "risky" now you know that you can do it by yourself, files are publicly available if one know where to look and how to find them. And since the latest update is not cumulative you cannot apply the latest to a very old version they would charge you a lot of hours to do it.. well actually it is cumulative but it wont apply because security check will not pass so be patience and follow the TPI.

 

Enjoy.

 

R.

My experience in one month with the updates:

Have buyed only CarScanner (forever licence 8€) iOS instead, cable for ODIS or ODIS services, or OBDEleven for ~60Є. I had a 5-year-old Vgate OBD Bluetooth adapter

Have Skoda Scala with MIB3 (Amundsen) 0156 factory (USB-C port)

Of course, thank you all who did the primary job and created different ways to update yourself!

1. I did nothing else, just all firmware update 0156 > 0238 > 0268 > 0278 > 0306 or 0308 (not remember which) > 0330 > 0332 (newest)

2. The last step, 75 and 5F errors. It means OCU update to the 143 and 00071C00 (enable navigation)

3. For error 75, use the instruction from user r0bb10 > 5WA035284OCU143.zip instruction

4. interesting part and total could take only 15min (phone with Carscanner + notebook to edit file and upload on USB the files) > enable FEC 00071C00

5. Connected the OBD adapter to the car, opened Carscanner on the phone:

5.a. Carscanner > Settings > Adapter > Advanced settings> SET ATST command to "16" and "Use software flow control during coding operations" and "when reading data" (2 parameters): UNCHECKED both

5.b. I went to Coding and service > Long coding > block 5F > Access Key should be: 20103 or empty (try both ways)> checked the box "USE Custom ID" and in the field that appeared entered 3C0A, then clicked "APPLY".

5.c. For sure message ERROR will appear, but you will see a new field DATA: E0 A5 F3 2C 1E (it's my code, but you will have yours. Total 10 simbols) it's VCRN ID number and is necessary to activate 00071C00

5.d. Save that number, you will need it.

6. From MIB solution page, download the file "MOI3preh Solution - BEWARE wait for feedback on mibwiki"

6.c. Download to PC software via Google "010 HEX editor" and open the program > open MOI3preh file "full.bin"

6.d. Use FIND function and search for "564320524E" > use REPLACE ALL function and add your number, for example, my "E0A5F32C1E".

6.e. all number "564320524E" will be replaced with "E0A5F32C1E"> SAVE the file > copy two folders and two files on USB flash

7. Just do a regular update as you did with other files

At the end, experience with CarScanner. Yes, maybe it doesn't have a nice UI like OBDeleven, but it can do a lot with it. Even changed some Themes on Copilot, etc. At the end easy to use and find what you need.

I hope that someone will help and not purchase for some items more than 20€

Edited 4 April, 20251 yr by Ventish

On 29/03/2025 at 23:56, Kermit80 said:

Thanks for the link, but I'm to stupid to find the OCU files for Version 0088 qnd 0148 on the russian website.

I have updated to the 143... here it is the > LINK

No need for EXCEL or for OBDeleven or USB cable or ODIS, etc

just phone + Carscanner (paid plan, but max 8€ instead 60€) + ODB Bluetooth adapter, PC/notebook to copy files on USB or SD card.

Read my post about that. There is all that you need to know.

Edited 4 April, 20251 yr by Ventish

On 06/03/2025 at 00:17, eyeofsauron said:

Thank you everyone for the tutorials and clarifications on how to update MIB. After getting some confidence as a newbie in this I would like to double-check some information just to be sure and not to brick the system. So if anyone can support me I would be thankful.

I have Karoq 2020 with moi3_eu_skmqb_p27000p.

1. According to the release train, I should go 270->308->330. Is this the proper way, as some people suggest going to 306 first (and with that 278)?

2. Do I need to update OCU as well? I guess I am already on the latter one since I have 270 (waiting for obd11 to arrive to read), if not, which is the lowest OCU allowed for this (I would be afraid to do this on my own).

3. As I do not have power cables, can I turn the engine on, disable the start/stop system, and leave it running while the update is working, or is it necessary to have only the ignition on?

4. Will updating to 330 remove my existing Care Connect package subscription?

Any other further advice would be appreciated.

Thanks upfront for the help.

Read an update from my side on April 2025. I have found an easier way, without OBD eleven, Excel, ODIS, etc... just an OBD adapter and carscanner. All necessary remarks were to follow, I placed. Costs and time saving way

12 hours ago, Ventish said:

I have updated to the 143... here it is the > LINK

What was your old OCU Version? Mine ist 0035 and as far as I read, I will have to Install 0088 First, before updating to 0143 or 0148.

Is this true, or can i Update from 0035 straight to 0143?

Edited 5 April, 20251 yr by Kermit80

9 minutes ago, Kermit80 said:

What was your old OCU Version? Mine ist 0035 and as far as I read, I will have to Install 0088 First, before updating to 0143 or 0148.

Is this true, or can i Update from 0035 straight to 0143?

Hi, not sure what is correct one. Wasnt looking for that info.

I had 088. But OCU update takes only 4-6min..

Do the update to 088 and then to 143.

But OCU update i did only at the end. Some descriptions said that neceasary before etc..

On 31/03/2025 at 12:04, peterx said:

Hi guys! I am new to the forum. This thread is very informative. Thank you!

My software version is MEI3G2_EUSKMQB_P1910J.

Unfortunately, I can't find it on MIB-Helper and can't see if there are any updates.

Could you point me where to look?

P.S. The automated update in the menu says "No updates". The current version build is from July 2024.

Hi there!! I just came across your comment and would like to ask you, is your car an MY24? May I ask you the month when you got it and if the software you mention is linked to the 8" Bolero o the 9" Audsen screen. Thank you in advance!

1 minute ago, Danyaero said:

Hi there!! I just came across your comment and would like to ask you, is your car an MY24? May I ask you the month when you got it and if the software you mention is linked to the 8" Bolero o the 9" Audsen screen. Thank you in advance!

Check in your system your software version, go to the Min-helper com, are that page found your software version. If yes, will show have you any new update. If, yes, than visit page Mibsolution.one, download one by one necessary version.

I think it doesnt matter the car, because everything what you should looking for is Software (firmware) version

3 minutes ago, Ventish said:

Check in your system your software version, go to the Min-helper com, are that page found your software version. If yes, will show have you any new update. If, yes, than visit page Mibsolution.one, download one by one necessary version.

I think it doesnt matter the car, because everything what you should looking for is Software (firmware) version

Thanks!! Unfortunately these trains are so new that they do not appear on MIB-HELPER. Don't know if there's another website/repository to check these.