Jump to content

Rally Mudflaps for VRS


Recommended Posts

Ok, I am liking the look of the flaps fitted to the Octy so how do I go about getting some for my Fabia? They are still not available on their website so is there going to be a group buy on these or something? Sorry for the impatience:O

Link to comment
Share on other sites

Well when Performance creations sort them out for Keiths then we will all be able to buy some.

Apparently some minor mods going on before the template for full production is made.

they look good on the Octavia so should look good on the fabia plus the fabia is more stocky and will suit the wider look of the mudflaps

Link to comment
Share on other sites

This is my 1st time posting pics...so fingers crossed :)

Here is a side view of the flaps fitted (my kids had to wash the car...so its not perfect!!!)

Sideview1.jpg

and from another angle

Sideview2.jpg

as yopu can see the rear flaps are around 60mm higher at the bottom edge than the fronts....should they have the same ground clearance??

In addition to this the top of the flap at on the rear is 30mm higher than the front...so I think this will definately need adjusting to keep the eye line correct.

As with the Fluffmeisters octy...the rear flaps do not mould into the arch well ...so I think a couple of self tappers into the flange behind them will solve this.

rear.jpg

Another point to note is that the inside of the arch on the fabia is making the flap twist slightly so we may have to trim more off the insdie to get a better fit

rearfit1.jpg

- not just enough to clear the 'bulge' on the inside shown above - were I have used a self tapper to secure the flap.

I will be having a chat with Ian at PC tomorrow to see what he thinks aswell.

Keith

Link to comment
Share on other sites

Think they'd look better in black without the vrs logo.

I'm not too convinced about the fit around the arch, looks a bit too home made to me, how much will they be selling for?

Got a silver vrs on order, should pick it up next week, was told by the dealr that standard flaps don't fit the vrs bumpers so will probably end up with something like this.

Link to comment
Share on other sites

hmm I was expecting them to fit better than they look. Obviously we need to let PC sort them before making the final decision.

Orange a bit lairy! but if you like them thats cool.

The rears looked orange due to the low sunlight...the fronts show the correct colour...and it is the standard red colur that PC uses.

Link to comment
Share on other sites

The rears looked orange due to the low sunlight...the fronts show the correct colour...and it is the standard red colur that PC uses.

Sorry mate they do look orange. I think they will loook better to see the true colours. I think if rears are sorted out regarding the bad fit then I will definitly having some. just not too sure at the moment because of that. i'm sure pc will sort it. Have you got a day you will be going down? do you know if they will be able to sort the rears?

Link to comment
Share on other sites

More pics of a cleaned octy with rally flaps on.

I have taken the liberty of tweaking the mounting myself and am passing the info onto Ian at PC to expedite things with the octy.

Better fit round the arch's with a little trimming and the use of a couple of extra holes and some plastic "trim plugs"

Clicky

Link to comment
Share on other sites

i`m gonna be honest here cause thats what i do best. i think they look shiiite!!!!

but i am glad that you like them, there are things about mine which i`m sure folk dont like but these just look way to cHavish, they belong on an escort

Link to comment
Share on other sites

I personally like rally flaps if they compliment the car I had them on my Suabru and they completely changed the look of the car (in a good way I think) and was very practical (17's loved to throw up grime and stones etc) heres a couple of pics.......

rear.jpg

694c9f96.jpg

They are Scott Lowe flaps and cost a couple of hundred quid ( I seem to remember, maybe less) but they were great quality and unlike quite a few cheaper ones didnt flap about too much.

I know all this has got nothing to do with Skodas sorry

Link to comment
Share on other sites

Cheers for the photos Keith!!

It looks like a promising start to me, although I'll be ordering black myself! As far as your issues go i'm not too worried about the rear flap length althouth I agree that the top edges of front and rear flaps would be better at the same height.

Look forward to getting the final design approved so we mere members of the public can start ordering ours:thumbup: :thumbup: !!

Link to comment
Share on other sites

Hello Monty

thought I would say hello, you got me setup with a deal on an vortex exhaust for my blobeye over on scoobynet and we exhcanged pm's a few times :)

You got a skoda now then?

Link to comment
Share on other sites

Hello mate:)

Yep moved over due to fuel costs and new job 50 miles away:rolleyes: Enjoying the VRS though great commuter

I see you have a speed triple I had a Daytona 955i (until a small 70mph glitch) love the sound of that engine (specially through a blue flame!)

Sorry thread is about mudflaps not bikes;)

Link to comment
Share on other sites

Spoken to PC today ...I am going over next Mon to sort out the fitting issues.

I'm not one to readily take offense...but please refrain from calling me chavvy.....its neither intelligent nor funny.....and 4 those people who have met me...they will vouch for me not being chavvy.

I have spent a large amount of my time and fuel trying to sort out the fittment for those people who will be interested in whatever std colour is available, so if the small minded minority insist on 'having a go' I can easily stop helping, pay PC the going rate and you can start all over again.

Keith

Link to comment
Share on other sites

Spoken to PC today ...I am going over next Mon to sort out the fitting issues.

I'm not one to readily take offense...but please refrain from calling me chavvy.....its neither intelligent nor funny.....and 4 those people who have met me...they will vouch for me not being chavvy.

I have spent a large amount of my time and fuel trying to sort out the fittment for those people who will be interested in whatever std colour is available, so if the small minded minority insist on 'having a go' I can easily stop helping, pay PC the going rate and you can start all over again.

Keith

:orb_clap: :orb_clap: :orb_clap: :orb_clap:

I for one appreciate the effort you're going to, although I had hoped I could be the guinea pig so that I could get myself a free set:rolleyes: :D !!

Keep up the good work and I look forward to the next lot of photo's:thumbup: :thumbup: !!

Link to comment
Share on other sites

Yep, keep it up and post the photo's once fitting is sorted as I am very interested, although I will but some of a more discreet colour.

For some reason though, it reminds me of the time I made a set for my modified morris traveller using some old car floor mats!

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Community Partner

×
×
  • Create New...

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.