Skip to content

ords

FREEDOM
  • Joined

  • Last visited

Everything posted by ords

  1. You're doing nothing wrong. They should go on when unlocking, off when starting the engine, on when switching off the engine and removing the key and off when locking. There are some threads about the lights. A common cause for faults seems to be corrosion or similar on the circuit board in the front interior light fitting. I've never noticed any interior light settings in the options. The switch only has three positions. Off, (including the rear interior light), door operated and manually turned on.
  2. Very unlucky, mine's been an absolute peach.
  3. Turn the ventilation system off and see if the noise is still there.
  4. Suggest you post this in the Fabia section.
  5. Get it agreed by the garage doing the job.
  6. I'd get in writing that the products you have supplied are are correct and if anything goes wrong they can't say the wrong products were supplied.
  7. It should be throwing up a fault code. You need to get that read.
  8. Suggest you post this in the mk2 section
  9. You can download a 2019 manual here. https://www.startmycar.com/gb/skoda/octavia/info/manuals/2019 On page or section 112 under "vehicle driving mode" it shows the modes being set thru the infotainment screen
  10. You're the pathetic one. Child locks have been mechanical for as long as I can remember. It used to be a little lever. I guess requiring the key to operate it prevents it being knocked accidently into the unlocked position.
  11. We need to know which system you have and current software version.
  12. Suggest you post this in the Superb section.
  13. If yours is an Amundsen MIB1 then there is this workaround posted by @Tell. It will get you 2023 maps.. I've done it successfully. There is a 2023 mib1 map on mibsolution.one which Seat drivers have been able to use with a part number shuffle. Seat never got mapcare or rather had to fork out for map updates unless you use workarounds. Not sure of the Skoda position on mapcare in mib1, it got dropped in mib2. Lucky souls whilst Audi users are in the same boat. The workaround in mib1 appears to be edit DBInfo file with notepad. PartNumber1="your old part number" PartNumber="your old part number" Edit the the new map file two parameters too: PartNumber1="your old part number" PartNumber="your old part number" Obviously your your old part number is your old part number. Use the notepad editor if Windows. You might not need the part number on Skoda... pass on that, but if you do it appears to be just carrying forward you old PartNumber1="your old part number" PartNumber="your old part number" The unit being tethered on what was originally in place. The file is P106_N60S3MIBS2_EU_NT (8V0060866S): https://mibsolution.one/#/1/15/MSTD Always take a copy of the map file before deleting the contents !.
  14. It would have been helpful if you had said in the original that it doesn't even crank What error codes disappear? Manual or auto?

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.