oder the new ones, and pay for them , then ask to replace warranty ones and have them put new ones on instead and put new/old ones in car and sell on ebay

Rear one seems like its going to be bigger than its recess so will be a drama asking them to do it so will just do it myself I think.

I think I'll stick

I think I'll stick

I am trying to think of something to say as a reply to that Brimma but I shall just go with "..................................................." That is all!

Rear one seems like its going to be bigger than its recess so will be a drama asking them to do it so will just do it myself I think.

Definitely the case. My dealer were quite happy to do all of mine for me until I mentioned that the rear one required "creative fitting". So whilst in for it's service on Monday they are going to do the wheel ones for me and remove the front/rear.

I'm still not 100% sure how to go about the rear one - I have the flat rather than convex for the rear and I read that I need to add more adhesive tape to make it all stick.

Anyway - what's the worst that can happen??

Actually faster to fit the rear than the front.

On the FL had to trash the front one to take it out.

The front one is bigger than the rear, on the rear it was mentioned to use the curvey one

I just found out that the front one should also be the curvey to fit better

Even though it´s in, 90% ok, for best result would be the curvey one.

Well I bought two fronts ( 601) and put on front and rear, the convex front one ( 601) does NOT sit flush with the hatch , I then put a 630 on the rear and is much better post 70 shows my car with the 630 on the rear. Also Fubar the FL badges original ARE the same as a pre FL

Well I bought two fronts ( 601) and put on front and rear, the convex front one ( 601) does NOT sit flush with the hatch , I then put a 630 on the rear and is much better post 70 shows my car with the 630 on the rear. Also Fubar the FL badges original ARE the same as a pre FL

Cheers dude I decided today as I was having to drive by the Skoda promised land whilst working that I would call in order them all wrote down the numbers on a bit of paper and left, got to dealers and realised I hadn't brought the bit of paper......... maybe tomorrow.

Well I bought two fronts ( 601) and put on front and rear, the convex front one ( 601) does NOT sit flush with the hatch , I then put a 630 on the rear and is much better post 70 shows my car with the 630 on the rear. Also Fubar the FL badges original ARE the same as a pre FL

This makes me happy as it's the 630 I've got for the rear.

What "extra adhesive tape" did you use by the way?

None it fits fine, just cleaned with alcohol wipe 1st

Went in to order them all today and .................. not on their system cannot order in the Netherlands........

FIDDLESTICKS!

Could ask the lovely people here if they could get some for you

Could ask the lovely people here if they could get some for you

lol are you volunteering?

I could work out the pricing for you. You after all six or just front/rear?

I could work out the pricing for you. You after all six or just front/rear?

That would be fantastic if you could cheers, I am after all 6 yes the curved and flat main badges and the wheel ones. I was going off your post on page 1 for part numbers : (are these the right ones for a curved front flat rear then the wheel ones?)

1ST 853 601A AUL - Front

1ST 853 630 AUL - Rear

601 151 ULM - Wheels

OK, these are the part numbers and the prices I paid:

1x 1ST853601AAUL - £10.63 (inc our VAT)

1x 1ST853630AAUL - £10.63 (inc our VAT)

4x 5JA601151ULM - £7.55 (inc our VAT) = £30.20

So I paid a total, inclusive of VAT etc of £51.45 for all six badges. I've seen others on here quote slightly lower prices, this is what my dealership charged me.

Delivery to Holland - wouldn't have thought more than £8 - £10 at most?

Let me know and when I go in on Monday to get the car serviced I'll put an order in.

OK, these are the part numbers and the prices I paid:

1x 1ST853601AAUL - £10.63 (inc our VAT)

1x 1ST853630AAUL - £10.63 (inc our VAT)

4x 5JA601151ULM - £7.55 (inc our VAT) = £30.20

So I paid a total, inclusive of VAT etc of £51.45 for all six badges. I've seen others on here quote slightly lower prices, this is what my dealership charged me.

Delivery to Holland - wouldn't have thought more than £8 - £10 at most?

Let me know and when I go in on Monday to get the car serviced I'll put an order in.

Cheers mucker I will PM you.

Here in Portugal they also said the same.

I asked if the Citigo needed parts what would they do?

Then came the supervisor who stated that they need to create the new part number list for the new Citigo.

That´s it, 10 days later had the badges.

Here in Portugal they also said the same.

I asked if the Citigo needed parts what would they do?

Then came the supervisor who stated that they need to create the new part number list for the new Citigo.

That´s it, 10 days later had the badges.

HAHA I asked the same thing and the name Citigo confused them. It is not out here yet and they are unaware of a launch date........ but its on the Skoda.nl web site when I looked this evening...

What a load of trainspotters

Enthusiasts are who discover these great little mods, and who are the ones still working out how to fix problems long after a dealership has lost interest in a particular model.. trust me I speak from experience (I'm also a VW Corrado owner!) So try and bear that in mind before you ask for help on here again!

Sheesh.

Enthusiasts are who discover these great little mods, and who are the ones still working out how to fix problems long after a dealership has lost interest in a particular model.. trust me I speak from experience (I'm also a VW Corrado owner!) So try and bear that in mind before you ask for help on here again!

Sheesh.

I do miss my VW Corrado G60 ( yes it was also Black)

Enthusiasts are who discover these great little mods, and who are the ones still working out how to fix problems long after a dealership has lost interest in a particular model.. trust me I speak from experience (I'm also a VW Corrado owner!) So try and bear that in mind before you ask for help on here again!

Sheesh.

That and the keyboard warrior style of such comments that I very much doubt he would dare make as a stranger to anyone in here's face! Caution FUBAR bites! Woof Woof!

Here in Portugal they also said the same.

I asked if the Citigo needed parts what would they do?

Then came the supervisor who stated that they need to create the new part number list for the new Citigo.

That´s it, 10 days later had the badges.

Same with the Citygo light switch , I am the 1st in the world to order one and they need to produce an ETKA part no. been waiting 3 weeks

Same with the Citygo light switch , I am the 1st in the world to order one and they need to produce an ETKA part no. been waiting 3 weeks

Whats different about the citygo's light switch? I had a look at the pics of the interior and it just looks similar to the current switch?

PS, loving the badges

Whats different about the citygo's light switch? I had a look at the pics of the interior and it just looks similar to the current switch?

PS, loving the badges

Cheers it is a bit textured , looks more upmarket, you have to use it to see what I mean really