Will do. I don't have the tools for correct timing (presume theres a couple of pins/locker for it to be done properly?) also the engine is under about 70 bits of interior trim [emoji23]

Sent from my iPhone using Tapatalk

Will do. I don't have the tools for correct timing (presume theres a couple of pins/locker for it to be done properly?) also the engine is under about 70 bits of interior trim [emoji23]

Sent from my iPhone using Tapatalk

If it was running fine it just needs marking up and new belt fitting back in same place, then 6-10mm gap on tensioner

Just watched a youtube vid - looks easy. haha

Just watched a youtube vid - looks easy. haha

 

Do it while the engine is out, much easier.

 

Even if you don't mark the belt its not hard to reset the timing - made more difficult by the cramped bay but still doable.

 

Had to do mine several times now! :(

Just watched a youtube vid - looks easy. haha

Just picked the kit up this morn, it was a ina one, still got £30 off it and a free water pump can't be bad

Yeah i'm going to do it whilst i have the engine out.

At what point should i start a project thread? haha

 

I just keep re-reading all the 1.8t threads. Just front subframe to take off and Ibiza can go

Yeah i'm going to do it whilst i have the engine out.

At what point should i start a project thread? haha

 

I just keep re-reading all the 1.8t threads. Just front subframe to take off and Ibiza can go

Dunno I suppose when you actually get a fabia haha

All jobs done I'll leave this here

Draft42 gear shifter cable bushes

Vibratechnics Engine and gearbox mounts

New oem divertor valve

2.0tfsi coil packs, new plugs, Ecs adapter, and mk5 wiring cowling

As well as cambelt done with new pump

And s2000 filter adjusted

Looks spot on. Just inlet to do black [emoji108]

Sent from my iPhone using Tapatalk

Looks spot on. Just inlet to do black [emoji108]

Sent from my iPhone using Tapatalk

Or polished to much black may "dull" the engine bay a little too much. All down to Trevor taste now.

Tarty nonsense :P

Or polished to much black may "dull" the engine bay a little too much. All down to Trevor taste now.

It is kinda polished now, I think having it red will be ok

Last few bits of prep for vwfest at the weekend, rear 15" steels fitted with pradas to match fronts, rear strut brace fitted, an a couple of stickers

looks smart

Looking forward to meeting you and the fgf

Sent from my GT-I9305 using Tapatalk

Looking forward to meeting you and the fgf

Sent from my GT-I9305 using Tapatalk

Looking forward to it mate, if this rain would stop I can carry on with cleaning and a wire tuck

Another pointless mod which I doubt anyone will notice, tucked the injector wiring loom under inlet manifold means I can polish the fuel rail haha

Couple of pics from VW fest at weekend

And my dog loving it !

Looking good!

Nice photos Trev. Fish-eye lens day was it?

Nice photos Trev. Fish-eye lens day was it?

Playing with my new go pro haha

Bit of a change of interior facelift fabia seats look similar to the sport ones

Got one little engine bit still to come, but she's now wrapped up in the garage till next year now, going to get some minor fettling over winter

Thay look nice ;-)

Is there such a thing as too much green?

Never to much green maybe paint the outer rim green and the inner gloss black?

Sent from my GT-I9305 using Tapatalk