Hello! There is any update for it?

 

5Q0035840B

SW 0367

 

thank you! 

I don't have any... others pls check your PMs.

Well unfortunately and after updating my AMUNDSEN2 no improvement or even worse, a real fault with my screen which has become far too dark and with too low a brightness (even fully in the settings)

I can hardly see what is displayed in the middle of the day and, almost nothing in the event of the sun = I am sad and disappointed. 😔

Is there a way to go back please? 🤔

13 minutes ago, Flipou said:

Bon malheureusement et après mise à jour de mon AMUNDSEN2 aucune amélioration voire pire, un vrai défaut avec mon écran qui est devenu beaucoup trop sombre et avec une luminosité trop faible (même à fond dans les réglages)

Je vois à peine ce qui s'affiche en milieu de journée et, presque rien en cas de soleil = je suis triste et déçu. ??

Y a-t-il un moyen de revenir en arrière s'il vous plaît ? ??

 

EDIT: error on my part, the screen brightness is in a mneu which is not concerned with "mood lighting" but by the "screen" menu so I was wrong, and I finally managed to set my screen correctly (sorry double post but not found how edited the first one) good evening 

Hello, I would really appreciate the updated firmware for my unit.

 

 

Thank you very much.

 

Hello! After update to 0480 i lost my gps maps on. It cant load navi. Do you have any idea?

Based on my experience, update to 0480 for Amundsen units seems to remove patch for using non original SD card for maps. No other issues noticed.

Do you have original Skoda SD card or not? If not, you need to get one to have navi back working or patch the unit again. If you have original card, no quick hint.

patch the unit? downgrade?

Nope. I mean apply the same patch you did in the past to skip original SD card check.

As far as I know it can be done via MIB2 Toolbox or some other way..?

Happy New Year to all here. Really nice to see such an active community of Skoda owners/drivers and support here. 
Looking if there is an update available for my system. It seems that @pab567is a real expert and specialist. 
 

Pls see attached

Thanks in advance 

On 08/01/2022 at 16:11, kodiaq75 said:

Hello! After update to 0480 i lost my gps maps on. It cant load navi. Do you have any idea?

 

Pls post the list if installed FEC/SWaP codes

 

@PvD check your PM

Edited 10 January, 20224 yr by pab567

41 minutes ago, pab567 said:

 

Pls post the list if installed FEC/SWaP codes

 

@PvD check your PM

 

Was this unit factory installed or retrofitted?

2 hours ago, pab567 said:

Was this unit factory installed or retrofitted?

Factory 

5 hours ago, pab567 said:

Was this unit factory installed or retrofitted?

Hi there @pab567. Is there any update for this?

I am struggling with updating my NAVI with new map. Could it be because the SW i FW is old?

Cheers

I don't think so... download link on PM

6 hours ago, pab567 said:

Was this unit factory installed or retrofitted?

 

Is the SD card original? hae you unpacked files directly to the root of SD?

9 hours ago, pab567 said:

I don't think so... download link on PM

 

Is the SD card original? hae you unpacked files directly to the root of SD?

The card is not original. Trying it on a regular Sandisk SD card. I've put the files on the card like they are on the original. Using MacOS.

Should I erase the original card and then put the files on it? 

25 minutes ago, shubosaki said:

The card is not original. Trying it on a regular Sandisk SD card. I've put the files on the card like they are on the original. Using MacOS.

Should I erase the original card and then put the files on it? 

 

You need an original SD card for a factory/stock Amundsen to load the nav data 

 

It checks the CID and if that doesn't match, it won't work. There are a few SD cards where you can change the CID to match an original card but there are quite rare, it's certainly easier to grab the correct card.

16 minutes ago, langers2k said:

 

You need an original SD card for a factory/stock Amundsen to load the nav data 

 

It checks the CID and if that doesn't match, it won't work. There are a few SD cards where you can change the CID to match an original card but there are quite rare, it's certainly easier to grab the correct card.

I have the original one, will try to erase and put the new data on it. Hopefully it works

 

Thanks

2 hours ago, shubosaki said:

I have the original one, will try to erase and put the new data on it. Hopefully it works

Before you erase it copy the data onto your PC as a backup

Hi @pab567:

 

Do you know if there is a newer firmware for the following combination:

Device part number: 5Q0035840C

HW: H41

SW: 0468

 

Thank you in advance.

2 hours ago, PetrolDave said:

Before you erase it copy the data onto your PC as a backup

Ofcourse. Hopefully I'll don't need it, but you never know. 

 

Will post the update of SW and maps if I manage it

@dsdd PM

Happy new year everyone!

@pab567 I'm looking for a new FM for the following MIB2:

 

Device part number: 5Q0035874A

HW: H24

SW: 0245

Thank you very much in advance!

PM