Please no spam only post new coding that is not here... if you like the manual give me a like thx

 

 

 

OCTAVIA IV CODING
tested working coding obdeleven

To verify 3 steps  unlock SFD, 1 is registration add name ... which was normal, then parking  brake must be on, hood open, ignition on...  SFD unlock each module in aplication , not only 1 , u need to unlock all...

 

Lane Assist to "Last setting" (asistent jazdného pruhu na "posledné nastavenie" )
EN- driver assistance (module A5) > long coding > Configuration for lane departure warning KI15 > change to "last setting"
SK-  asistencia vodiča (modul A5) > dlhé kódovanie > Konfigurácia upozornenia na vybočenie z jazdného pruhu KI15 > zmena na "posledné nastavenie"

VRS CLUSTER THEME:
Control unit 17 - Adaptations - view activation (Zobraziť aktiváciu) - all which are OFF should be ON (Set all views to active)

Speed warning:
Control unit 17 -long coding-speed warning take off or on 

 G-meter:
Control unit 17 - adaption- configuration of displayable contents -set G-Meter -> active

Charging pressure ( turbo boost show) (zobrazenie turba):
Control unit 17 - adaption- configuration of displayable contents -set charging pressure to active (bost pressure)

Engine torque and Engine power:
Control unit 17 - adaption- configuration of displayable contents- engine power and torque set active

Oil temperature
Control unit 17 -long coding-oil temperature display-set active, this function factory set on..

Automat transmission temperature , oil temperature and coolant (water) temperature:
Control unit 17 - adaption- configuration of displayable contents- Transmission temperature set active

Disable seat belt warning:
Control unit 17 -long coding- seat belt warning verison1, version 2 or off- set off to turn off warning 

Show Volume to be Replenished (zobraziť kolko l dotankovať):
Control unit 17 -long coding: volume to be replenished  set  active or on

Laptimer:
Control unit 17 -long coding- lapcounter set to active or on,
other activation:
Control unit 17 - adaption- configuration of displayable contents -set lapcounter-active
Control unit 17 - adaption- personalization- display_laptimer to active

Staging, Needle Sweep, indicator celebration:
Control unit 17 -long coding-Staging set yes

Rear DRL Lights (rear daytime running lights) (zadné svetlá ako denné)
1.Module 09 - Electronic control unit
2.Adaptation
3.Daytime running light
4.Tagfahrlicht-Dauerfahrlicht aktiviert zusaetzlich Standlicht: - (Change value to On)
CONFIRMED WORKING

ADD Enable / Disable daytime running light in menu radio:
DRL In lighting menu (Attivazione e disattivazione delle diurne da menù)
- Select control unit 09
- Select Adaptation
- Select Daytime running lights ( Per gli italiani, Luci Diurne)
- Select Tagfahrlicht Aktivierung durch BAP oder Bedienfolge moeglich, Set to Active

Lock when car engine runs:
Control Unit 09
Adaptation
ZV allgemein
funk bei klemme15- set active
Menu  of control door locking view :

Menuesteuerung Tuerentriegelung: or in English Menu control door release:
-Select Multimedia 5F ecu
-Adaption
- Vehicle menu operation
menu_display_central_locking > not activated ( original is activated and where is off take on)menu_display_central_locking_over_threshold_high > not activated (set activated)

 

Edited 21 November, 20214 yr by petopzdiag

Phew this is way above my head.

hm? whats problem ? 

activate additional ambient light colours

open the bonnet

09 central electrics - adaptations - interior light  hmi config

first and second value should be 7fffffff coding and ignition of, ignition on turn multimedia on , find ambient lights and shoul be activated additional 20 colours

Edited 13 March, 20224 yr by petopzdiag

The problem with these sorts of threads is that the people giving the info seem to assume a certain level of knowledge of coding and using OBD11. 
 

I would like to buy a unit and do my own coding but there doesn’t seem to be any step by step guide to help the novice. I’m pretty good with technology but I’m still nervous of buying a OBD11 unit and not being confident in using it. Not even the OBD11 website is easy to follow!

 

I think part of the issue is that a list of posters are not natural English speakers so the translation can sometimes complicate things!

i coding only obd11 my octavia 4  2021  all working  ,and up info coding tested

On 13/03/2022 at 20:53, petopzdiag said:

activate additional ambient light colours

open the bonnet

09 central electrics - adaptations - interior light  hmi config

first and second value should be 7fffffff coding and ignition of, ignition on turn multimedia on , find ambient lights and shoul be activated additional 20 colours

I can't activate VRS Cluster Theme, and the interior lights hmi configuration is not working for me. It's a litlle bit confusing for me the part in bold. The ignition should be ON at the beginning of the process? should be OFF. For do this change should be activated the interior lights before? How can I do activate them to activate aditional colors after?

yes turn ignition on,open bonet and aply parking brake   and coding  after turn off  how to coding without on ignition ??  

vrs theme not working for all octavia 4 

8 minutes ago, petopzdiag said:

yes turn ignition on,open bonet and aply parking brake   and coding  after turn off  how to coding without on ignition ??  

vrs theme not working for all octavia 4 

I dind't understand if ignition for you is motor on or only contact on. For me, ignition is when you start the motor.

When I did my mk4, I had the engine running.

not run engine only turn on ignition and dont start  

On 13/03/2022 at 23:03, MiniNinjaRob said:

The problem with these sorts of threads is that the people giving the info seem to assume a certain level of knowledge of coding and using OBD11. 
 

I would like to buy a unit and do my own coding but there doesn’t seem to be any step by step guide to help the novice. I’m pretty good with technology but I’m still nervous of buying a OBD11 unit and not being confident in using it. Not even the OBD11 website is easy to follow!

 

I think part of the issue is that a list of posters are not natural English speakers so the translation can sometimes complicate things!

Obd11 has apps that do coding for you, almost every available adaptation has an app and it's easy and reliable. https://obdeleven.com/en/supported-vehicles

Edited 17 March, 20224 yr by zetzet

Anyone tried changing Display Depiction for dashboard? 8 versions but only 1 active. Can’t activate the rest. Obd11 with SFD unlocked.

22 minutes ago, stridercombi said:

Anyone tried changing Display Depiction for dashboard

Not quite sure I understand what you're looking for (since I'm not yet connected to my "virtual" Octavia - still waiting for it), but are you looking for this sort of mods? Check the link below, at minute 7:20 - is that it? 

I know it's a Golf 7.5, but you might get some hints from the video

 

 

Basically, this is inviting trouble for car owners who aren't experienced in doing things like this and, as a consequence, end up having electronic issues and the car having to go into a dealership for rectification work which has to be paid for at their own expense. 

everyone who codes for a car does so at their own risk :)

 

Basically leave it to someone else who actually knows what they are doing.

 

Namely a professional, although that still may have repercussions. 

even a professional sometimes makes a mistake and breaks the car;) every person's thing who makes a car    and comments only if you have a new encoding stop spam about nothing

 

if you have a new car ,why would you want anyone to try and upgrade anything?or rectify  faults when it is under warranty .it could make your warranty null and void and how much money could you end up paying?

a car that is under warranty will not lose its warranty after coding things except to turn off seatbelt or start stop  warranty you only lose when you do some things new retrofit  but unlock stagging, oil temp, dont loss warranty.. i have o4 2021 in warranty nad after coding dont loss  

1 minute ago, Joss1733 said:

if you have a new car ,why would you want anyone to try and upgrade anything?or rectify  faults when it is under warranty .it could make your warranty null and void and how much money could you end up paying?

 

Because Skoda want to charge a small fortune for additional functionality, functionality which more often than not is a simple software tweak which can be done by someone who knows what they are doing eg a Skoda trained technician who may be interested in getting some extra cash on the side or someone who knows VCDS or OBD11 inside and out and can do the job without any issues rearing their ugly heads. 

 

OK, you can do it yourself and at your own risk, but it can backfire and you and you end up with a nasty large and unnecessary bill for a garage to put it right. 

stop spam, post only coding information..... new codes ! its write up 1first text... comunication forum have many .. this post only coding new coding  not talking what about...

Right I'm going to be quite candid with you. 

 

What you are doing is fine, but do it to your own car, don't encourage others to do it especially when your English isn't great, it makes it more difficult to understand and much easier to make a mistake.

 

The Mk4 has enough software issues without you encouraging those who are inexperienced with the software side of things to tinker with it, causing even more unnecessary issues and misery for them. 

 

You say that a lot of it can be done with preprogrammed apps, I'll go with that, but you're also suggesting that owner's use what's known as adaptions and long-coding, something that should only be attempted by those who have the necessary skills, knowledge and expertise. 

 

That is importing unnecessary risk and that's unacceptable, as the slightest error could have the potential to affect the safe operation of the car. 

 

So I respectfully suggest if you want to post these software tweaks, that you get your English up to scratch or get someone else to do the post so that the instructions are absolutely crystal clear and have been double (if not triple) checked for errors to avoid any further issues and most importantly put a disclaimer stating that whilst they are made in good faith, they are to be used entirely at their own risk. 

 

Better still if you insist on doing this thread to show how to do it, try using your phones video capability to showcase your expertise on the matter, especially if English isn't your native language, because a video is far better than fractured English. 

Edited 20 March, 20224 yr by TheWanderer

check first post  its manual coding  not 1click coding  nice day

I coding cars for more than 9 years without problem  i coding 30 octavia 4 cars without problem  all coding is tested