Cairus

VAS6154a or vnci Red....

🤦 Organize a VAS Dongle and i Help remote

I fitted roof rails to my Seat, painted in glossy black... it looks much better. I would personally replace the seal underneath.

Import Car?

No warrenty Backup_Superb.html

Share Backup Full Backup obd11

BASIC Error you dont repair with Backup Which Diagnose Tool you have? You have a VAS Dongle? Then i can to it remote Write PM To me

He have normal LED @Aymn Feedback?

Another possible option: use a diagnostic tool to access the 5F control unit, go to basic settings, delete navigation data (this should format the navigation system's memory area), then insert a USB stick containing the navigation data.

Coding during brake conversions is always a tricky subject. If it weren't necessary, why would the OEM bother? Even the ABS control unit has a data set. Coding activates different parts of this data set. To put it dramatically, you're essentially converting the brakes from a Fiat Panda to a Porsche. The control unit, however, still operates with the Panda's data. This means that in very rare situations, which will likely never occur for some people, your entire braking behavior could go haywire. Wherever the system brakes automatically using driver assistance systems, the ABS coding anticipates a certain delay at a specific time X, which is when the system automatically activates the valve for that time.

Maybe, i can Test IT, with my Device

In the Abs Coding is Front & Rear PR Code of the Break

Normaly you have To Code Abs Control Unit

No warrenty : SVM i can only make via remote Kodiaq_BMC_Licht_Anpassungen_normal_LED.txt

Send all Number of Controller you have in the Car. Second: buy a VAS Dongle, so remote Help is Possible in the Future

You have only obd11? If yes, i will send later the adjustment from BCM

Mib3 Preh? Simple To fix the Problem with the FeC by DIY with USB The reason, the memory Structure reorgenice New from Firmware 01xx To Firmware 02XX

I will send you Matrix LED?

My free time Job, i like it.

The first LED headlight wiring harness is almost finished; only the 14-pin connector and the small pins are missing.

This is normal: You make the Update in your own risk NO reason to panic! Just press SKIP to let the FW update continue! ⚠️ NEVER EVER CANCEL the update --> a bricked unit is most likely the result.

Firmware: https://mega.nz/file/RvEj2ZrQ#WWBn-ovqOKO8hFnJzEtutlzIkMP_pXkMG2BGGasE3v4 You need User Manual, dont Update right now

Which Firmware is now on the Unit?

Or AIO (All In One) Firmware 1440

Make 332 Firmware Update