Cairus

Turn on the seat heating and rear window heating, then the alternator voltage should reach to 14.6V. This is controlled via the LIN.

look at the live data.

as I said, look at the mechanic

It would be helpful to know which version is currently installed

Has the oil been changed or serviced recently? Here, as always when I have this error, all the interval data no longer fits.

So, personally, I've never had a calibration error due to undervoltage, but I also assumed that it was deleted.

Warrenty of painting 3 years in Austria

You can't use VCDs on the airbag control unit anymore, nor can you use other standard tools. Only online via ODIS or other expensive tools. You can't add keys anymore; the 7-digit PIN is no longer available. CS encryption is required because of the immobilizer. Coding without SFD is useful, yes. Starting with SFD 1, it's been put in a drawer for me.

The marked position is correct. The sensor is mounted on a support plate with fine adjustment screws for aligning the sensor. The plate is then screwed onto the grill. However, the support plate is prone to breaking, which is when this error occurs. The Octavia 3 Facelift have the Same Position

It's interesting what he can do with VCDs on the MQB Classic and MQB EVO. He should add which platform it is to his list. VCDs are almost useless on the MQB or EVO. However, I think VCDs has a very good error log and backup function. I bought an unlimited V2 years ago and paid €460 back then.

I was called, how can I help?

Are you serious about the question?

I now have confirmation. mib2 Amundsen, SW 0480 with SW1804 climate control doesn't work. I flashed the climate control, and the display was immediately in the mib.

Share a "admap" Control Unit 09

Where you search?

AliExpress?

1) vcds clone is always crap. 2) vcds normally saves the logs with the changes

the headlight is not suitable for this

I've decided to go completely plug & play. I don't even want to re-pin the original wiring harness.

Autoscan?

Connect obd11 Go to unit 6D BASIC Settings Teach flap opening angle Start Open the Trunk Close the Trunk Stop Basic Settings

You have set the Basic Settings?

The actuator for the tailgate naturally has a wiring harness. The yellow and blue wires in these often break. If these actuators are replaced, the wiring harness in the interior also Part of the actuator.

What is in the Error Log?

why don't you complain?