Cairus

Unit 08 Check Byte 11 Bit 02+03 must be on

5Q0407764FV = 5Q0 407 272 EC No warrenty

not just component protection

Yes. But it is Not Plug & Play!!!

Rapair or Change unit

The Side Assist is installed at the same time

So, here's the thing: The facelift bumper section is getting a fresh coat of paint. I picked up the last parts for the conversion today.

With the OBD 11 dongle, I've often had it light up but no connection. I pushed the dongle firmly once and noticed that it was stuck.

The TSR can be unlocked in every MIB 3. You can also basically remove your 2Q0 camera and install a 3Q0. The SwaP Protection is on the unit A5 not on the MIB3

I don't understand what this has to do with the TSR activation in the 2Q0 camera?

Which dongle? OBD eleven?

Activate byte 47 - Bit 6 Activate byte 51 - Bit 1 No warrenty

Connect OBDeleven to the vehicle. Control unit 03>Basic settings>Reset tire pressure monitoring indicator warnings

T16C Connector Number C Have 16 Pin's

Why mib?

How many black Connection you have bei the unit?

I have the Files etc. etc.

You have a 98% chance of a broken wire in the left steering column switch. The yellow and green wires are probably broken. Check that.

There's now a modified firmware, a SwaP/FeC generator, that allows you to hack the control unit. However, you should never go online to the control unit with a factory diagnostic device.

Yes, but 2Q0 is SwaP Protection

You have 2Q Kamera HW?

Remove Airbag Then you Take Out the Button

No the black connector Coding Byte 1 Bit 0 Set Activ

Unit 42 Connector T16C Pin 1 (12V +) Ground (0V -) T16C Pin 3

In 2008, there was a pre facelift on the outside, but an interior facelift. You can do whatever you want.