Amundsen MIB2 Firmware Update

[pab567]

All check your PMs.

[MattScore]

Can anybody help with the update for my system, details below: 

Spoiler

 

 

12 minutes ago, pab567 said:

All check your PMs.

Thank you 

[ediXo]

On 06/06/2023 at 23:07, varooom said:

Sadly you know the dealers are lying to you, it should in stages be able to update to 0324 (eventually)

But in upgrading from such an old version, it will erase your Sat nav licence iirc.

Took a few visits and allot of repeating myself to look up the TPI but they finally updated it to 324.

 

Just Android Auto not working wirelessly yet.

[samdaynz]

Hello, Is there an update for this?

I am having a big issue where AA was working just fine - then out of the blue it now requires a key, wont connect to nav or bluetooth. I am hoping an update will resolve.

 

Thanks,

[SlevinSeven]

Hi pab567, 

 

Please can you provide the latest software update available for my device?

 

Device Part Number: 5Q0035874C

Hardware: H41

Software: 0472

Navigationsdatenbank: V03959820F1910

ECEDL3 2023

SHIELD: SHIELD 2016-44(build 309)

 

Thanks in advance!

[Hradlo]

Hello,
 

Does anyone have MST2_EU_SK_PQ_3xxT 
 

Any version. I have in Amundsen MST2_EU_SK_PQ_253T
 

I would like to go higher to 3xx software. 
 

I have also Bolero with MST2_EU_SK_PQ_353T

 

It is possible to extract it and install to Amundsen?

[banderboy]

Can you help with the update for my system  please 

Thanks

[mortenalloverDK]

Im gonna jump on the bandwagon aswell and ask if there's an update available for my skoda fabia? And does anyone know if my hardware supports navigation?:d Much appreciated

 

[tarzan2000]

Hi all

• Can somebody let me know if there is a possibility to have firmware available with this hardware ? I meant to read that the newest version is 254 for this hardware, is this correct ? Where is this available ? 
• Also is it possible to activate Android Auto (and/or MirrorLink) by myself ? I have a working HEX-V2 CAN bus and did a little tweaks but don't know if it's possible to activate.

 

Thanks in advance.  

 

 

[tarzan2000]

12 hours ago, tarzan2000 said:

Hi all

• Can somebody let me know if there is a possibility to have firmware available with this hardware ? I meant to read that the newest version is 254 for this hardware, is this correct ? Where is this available ? 
• Also is it possible to activate Android Auto (and/or MirrorLink) by myself ? I have a working HEX-V2 CAN bus and did a little tweaks but don't know if it's possible to activate.

 

Thanks in advance.  

 

 

 

My apologize for the bricked image links. Here are the three images where i was talking about. 

[mortenalloverDK]

On 21/08/2023 at 00:00, mortenalloverDK said:

Im gonna jump on the bandwagon aswell and ask if there's an update available for my skoda fabia? And does anyone know if my hardware supports navigation?:d Much appreciated

 

Seems that my pictures are weird too, here's the text from the images: 

 

SW update

Installed SW-train version:

MST2_EU_SK_ZR_P0361T

Installed SW-MU version:

0361

Component Number:

5Q0035840B

Softwareversion:

H28.28.174_STD2Plus_EU 

And: Systeminformation

Componentnumber system: 500035840B

Hardware: H30

Software: 0361

Media Codec: 3141.0.0.1

[tarzan2000]

52 minutes ago, mortenalloverDK said:

Seems that my pictures are weird too, here's the text from the images: 

 

SW update

Installed SW-train version:

MST2_EU_SK_ZR_P0361T

Installed SW-MU version:

0361

Component Number:

5Q0035840B

Softwareversion:

H28.28.174_STD2Plus_EU 

And: Systeminformation

Componentnumber system: 500035840B

Hardware: H30

Software: 0361

Media Codec: 3141.0.0.1

 

I think the reason is that Google decided programmed that in their web app Google Photos when you do right-click -> "copy image"  you're copying a link, and not the actual image. 

[GPigno31]

Good morning @pab567

 

Thank you for this very usefull topic about firmware update. 

 

What firmware for my skoda yeti should you avise me ? 

 

thank you in advance for helping me

 

Best regards

[pab567]

@Hradlo - officially not possible, achievable under condition you find anywhere 03xx firmwar (I don't have it)

Others check you PMs. If nothing on PM then you already have lates FW for your unit.

[deepshegde]

On 02/07/2023 at 12:22, pab567 said:

Going from SOp3 frimware (03xx) to SOP4 (04xx) is not a piece of cake. First you have to flash th eunit with patched swdownload and then flash with 04xx firmware with especially modified metainfo2.txt.

Ok, I was able to successfully upgrade fw from 369T to 480T. Had issues the first time i realized SD card i was using was not class10. I attempted with a class 10 SD card and this time it worked.:) !

[automated_zombie]

Hi Everyone,

I'm new to this forum, can anyone help with updating my system. Any bit of help would be much appreciated. 

 

[primoe]

Hi i search the News firmware for :

 

i think tins this one MSTD_EU_SK_6230 MU 490 but i can’t find,can you help me ?

[snowglowjoe]

Good morning - this is my current firmware. I am now getting error code '01555 - Check Software Version Management', which I try to reset, but it immediately comes back on next scan. Any suggestions or updated firmware, greatly appreciated

[langers2k]

3 hours ago, snowglowjoe said:

Good morning - this is my current firmware. I am now getting error code '01555 - Check Software Version Management', which I try to reset, but it immediately comes back on next scan. Any suggestions or updated firmware, greatly appreciated

 

Completely normal, you need to follow these instructions to clear it:

 

[tigerfeet]

1 hour ago, langers2k said:

 

Completely normal, you need to follow these instructions to clear it:

 

Langers, thank you for your reply. I have been given a Carista device, which highlighted the 'fault' Having read your attachment from Powerman, it seems to be beyond my ability or undrstanding I'm afraid

[langers2k]

21 minutes ago, tigerfeet said:

Langers, thank you for your reply. I have been given a Carista device, which highlighted the 'fault' Having read your attachment from Powerman, it seems to be beyond my ability or undrstanding I'm afraid

 

I've never used Carista but this is a pretty common occurrence as it'll happen after every firmware update. It might be worth contacting their support to see if it can be cleared with their tool.

 

That being said, it has zero impact on anything so it's completely safe to ignore

[tigerfeet]

?

Edited 4 September, 2023 by tigerfeet

[snowglowjoe]

9 minutes ago, tigerfeet said:

?

Apologies langers replied with wrong profile but thanks anyway

[Oachkatzalschwoaf]

Hi, this is my system: is there a update available?

 

 

[boardtc]

On 13/07/2023 at 19:50, boardtc said:

I was unable to try again for the last 2 weeks as I was away until this morning. But I can finally report that I am now upgraded to 369 and the #10 fuse and glovebox are back installed! Thanks for all your patience, especially Varoom. I got to the bottom of the reason the error happened and perhaps it may help someone else in the future. I unzipped (with 7-zip) from the download file to the freshly formatted sd card. But one needs to first unzip the downloaded zipped file to a directory in your download folder. Then copy the directory contents to the SD card. Unzipping directly to the sd card does not work.

 

I've had various issues as I get more used to the car with the reverse camera not always working and issues with android auto such as the latest I found when there is no option to press number when connected to an automated phone system. I opened a thread on these (below) and the conclusion was that my firmware need reflashing!

Have ye seen this before? Should I try a new flash of the same download as before

 

 

Edited 7 September, 2023 by boardtc