pab567

Check your PMs

All check your PMs

I don't have any "activation enableb codes" - such universal codes do not exist, each code is generated individually for each SWaP/FEC and VIN, and I don't know anyone who can have such codes generated. You can either hae new features activated online by Skoda dealer or unit must be hacked. You will get link via PM

"C" pillars

Of course you can install used ones. Let me know part number they ordered and VIN.

I have such speakers as I replaced them with aftermarket ones (from Gladen Audio) so can sell it in a good price, pls contact me on PM if you are interested.

Visit you local SKODA dealer and ask them to proceed with unit replacement, including component protection removal, parametrization (loading of co called container file), coding and adaptations.

Not possible with this unit, it must be replaced either with Bolero 5Q0035842x or Amundsen 5Q0035874x / 565035874 (x is a letter A, B or C). New unit must be hacked. If you are interested pls contact me on PM.

I'm very sorry for all the troubles you have. Pls let me know on private message VIN of your car, I will check what is the unit model number and prepare a solution.

In these pictures I do not see microphone connection at all. Pls check if microphone (goes to pins 1 and 7 of blue plug in original QuadLock) are re-wired to the new unit. But even if it does there might be an issue of new unit supporting microphones of other specification than the OEM one.

If you are interested pls contact me on PM

You will not have Smartlink with this unit, you must have it replaced with MIB2 - both glove box and display units

Indeed, your unit does not support SmartLink. Even if you replace your Swing with MY19 Swing 6V0035871H, which supports SmartLink, I think you will not be able to have SmartLink officially activated and unfortunately I don't know anyone who can hack this unit. I can see two solutions: 1. retrofit your Swing with Bolero or Amundsen - approx. cost is 450 EUR or Bolero and 550 EUR for Amundsen 2. retrofit your Swing with aftermarket unit. If you are interested in retrofitting Bolero or Amundsen pls contact me on PM.

If you wire OEM cameras - yes. But this is aftermarket low camera, with just power (no trigger from reverse light) and if you connect power directly you may either get no picture at all or stripes on the picture as voltage on reverse bulb is not constant (as long as this is regular, no LED bulb).

1. Remove decorative trim - just pull it out. 2. Insert 2 removal keys at the bottom (flat parts outside). 3. Pull out the old unit. 4. Don't wire camera to reverse light bulb directly, either use special filter or connect camera power to terminal 15 (power when ignition is on).

What is model number and SW version? Press SETUP for couple of second until it shows second screen, and provide details from menu "System Information" (or similar - don't remember).

Ypu need to wait a bit as my NAS has been compromised and I need some time to have it fully recovered.

Check your PMs

Check your PMs

Yes, MST2_EU_SK_ZR_P0480T is the latest version available. @Frko your unit does not support SmartLink, none update SW will have it enabled, you must have your unit changed, e.g. to 5Q0035842C. If you are interested pls contact me on PM. All others pls check your PM.

I beleive it's illegal in most of countries

I've just received P0480T but I have not checked it yet. All check your PMs

PM

PM

If you let me know model number and current SW version of your unit...